Cascading 555 Timers for Custom Blinking LEDs 

I am not an electrical engineer and just starting to meddle in electronics. Your videos are so logical, clear, and not overly repetitious that even I can follow them. Thank you so much!

Great video. Cascading 2 monostable 555s was one of the first "puzzles" I ever tackled in electronics when I started 6 months ago. I'm currently trying to design a circuit that would blink one LED once, wait, then blink another LED once, then wait, and repeat using 555s and perhaps some logic chips if need be. I can totally relate to not being able to get an idea for a circuit out of your head until you work it out. Cheers.

Just what I was looking for! Excellent tutorial and explanations. I’m going try this for myself. Thanks.👍👍 Looking forward to seeing more .

I liked the video, but I would have enjoyed a heads up for this circuit earlier in the week so that I could contemplate and implement my own solution before watching yours. Is there anywhere/anyway to be notified about interesting circuits like this before the video is out?

Thanks! That was so clear and logical. I never understood how to use a PNP transistor until I watched this.

very nice video. i have learned a lot. i have question instead of putting a led can i put a power mosfet to drive a tank ciruit that resonates at 30khz? or drives a zvs circuits? hoping for yr reply thanks

Very good video, your explanation is so good! thanks!

Great video! I would like to see the other ways of making this possible. Because I don't know much (more like anything) about microprocessors. Since I really enjoy your videos and like the way you explain things it would be awesome to hear from you how that would work. Thank you for your time

Nice circuit! What about pins 2, 4 and 5? Did you connect them like your video "How 555 timer works"? Thanks

really cool. like the way you group breadboards together must try this

Thank you I was looking for the LED to be on for a short period of time and off longer. If I try this idea maybe I can make it work. 👍🏼

great project , how do u add a fade effect instead of blinking , and with adjustable speed controller?

Love your videos on the 555 timers, you explain it all very well. Do you have a video on transistors and how to use them?

I'm making a model of the A380 strobe lights and accidentally discovered that you could use the output signal from another 555 timer along with a diode and 10K resistor attached to pin 2/6 (negative end towards pin 2/6) of the LED timers to regulate whether or not the LEDs turn on for a certain number of times and then off. In this case I needed a timer for the strobes on the wing tips to blink twice @ 50ms and the red anti collision lights to blink once at 50ms. If i turn the chips on and off with transistors the timing in the signal was noticeably longer than 50ms on the first pulse before it settled into its normal width. Interrupting pins 2 and 6 with the signal from another 555 timer to regulate it (used your diode design to adjust the duty cycle) eliminated this pulse width problem. Total amateur here and not a math wiz but just wondered what your thoughts were on this.

Love your videos! Alternative scheme would be 2 monostable triggers connected to your carrier; one set high & one set low. Don't really like sinking too much current through the 555.

A really nice video on 555 timer ic application.may i know what kind of transistor did you use.will a bc 547 bjt suffice for this experiment

You made my day! I watched all your 555 timer videos :)

I saw a video a while back of 3 rows of LED "chasers". 3 rows of LEDs consisting of 10 LEDs in each row each moving only from left to right . When reaching the 10th one starting again on the left side.The middle row moved across at half the speed as the top row and the bottom at half the speed of the middle row.They were all in sync. Any ideas of how this would be accomplished. Three 4017 decade counters maybe? With a 555 as a clock, Use pin 12 carryout to the input of the next one?

Very informative and Understanding Circuit making... Thanks a lot !!!

Nice tutorial. Thank you. How did you know to put a 10K resistor between the 1st 555 output and the NPN base ?

I'm pretty sure you could do this with only 2 ICs. For example have 1 555 with a period of 3s controlling where the output of a second 555 goes using two transistors. On one of the transistors the controlsignal from the 1st 555 should be inverted. And also, to keep the timing, the signal from the 1st 555 could pulse trigger reset on the 2nd. I'll challenge myselfe to do this

If I wanted to use a trigger to activate and limit the cycles in this circuit, I could add another 555 in monostable mode and set the timing for the time it takes for the number of cycles I want, and connect pin 3 of new 555 to pin 8 of the first one in your drawing right?

Question, you appears to have connected pin 5 on each to GND with what appears to be a capacitor, is that correct? also Pins 2 are connected to pin 6, but are not in the diagram, is that always a given for 555 timers?

Would this circuit still work if you removed one set of led’s and 555? I need to make some led’s flash twice then pause but only one set of led’s, not alternate between two sets.

cool videos on 555 timer! Explanatory and informative...

Is there a reason to have 2x 10k instead of 1x 10k and just connect base + diode together sharing the same 10k resistor?

Great lesson. Is there any way to get the full curcuit diagram. I am stuck on how to connect the rest of the circuit fully.

Great videos... I am not schooled in electronics, but learning. I am looking for a good video on how to strobe a low powered led - for tail marker on my RC Plane. I just successfully hacked servo board (from a servo with a striped gear) and tied it to a N channel mosfet (sp) to control the 10 W led landing light. Can you help. Gary

Fantastic video series! Keep up the great work! :)

Hello Jason! I am really thankful to you for this series of informational videos regarding 555. I am trying to implement same kind of application in one of my project, and this video helped me alot to understand the working of 555 Timer. After watching them, I am now able to think out of the box and thinking to add some more features to my application. I have a question, I want to make single LED blink at two different frequency, lets say, 1 Hz and 2 Hz without the additional circuitory. So, do you think it is possible? Thanks

can i use this circuit to feed two cctv cameras to a recorder using 1 line?

Can you simplify the circuit for a chaser light (the in-line one) with more than 10 LED's... Your content is very subtle, loved it 👍

HI, great und usefull stuff, i´m starting in electronics, but i have more experience in clay sculpting, recently someone ask me to make a serie of some specific lighthouses. but the particular light characterisics of each one are tricky, for example, i need a 1 second blink followed of 6.5 second obscure ( 1sFL- period 7.4sec), other needs a serie of 1 flash of 1 second of duration following of two second obscure period, two flashes, and a 5 second obscure (1sFL, 1s obs, 2sFL, period 10 sec). how can i do?

how can you make it flash really really fast ?? like in construction vehicle lights.

i just came across your video , and it really helped me alot ,thank you for that . plus a question ,, is there any version of 555 timer that could be used with high voltages like 220 v or any alternative of 555 timer ?

thx for all your efforts

How would you create a circuit where the LED gradually turns on/off?

This was so awesome.

Hi there, I really liked the video, I am learning a lot just watching it. One question: do you think you could do something similar with the exit of the pin 3 of the first 555 connected to a 4017 connecting the 5 first outputs of the 4017 to blink the first series of leds and the 5 other outputs to the other series of leds ? Thanks anyway for your videos.

How many timers would I need to split a 16v source into 12 2v outputs?

navigation system is not: "one set of LEDs blinking twice and then other set of LEDs blinking twice". they are actually flashing twice (or 3 times?), gap 1.5 second and flash again. can you shorten the time in between "blinks" to do double flash, 1.5 second gap and the double flash again; and further on

thanks to quick answer i want to do this project in my college , did you have the circuit diagram or draw for this circuit thanks alot for your help and amizing work

Nice Video , but i have a question which p-n-p transistor did u use

Dear Can u please help me ? i want a timer circuit wich can Relay On for 10 seconds and turn OFF the relay 10 seconds it will happen contineusly When battery is connected

Are the V (forward) and the I (forward) of the led important to determine the value of the other components ?

I'm totally noob to electronics, so bare with me if my question does not makes sense, but wouldn't be possible to use two 555 instead of 3?, one 555 that just blink the LEDs and one that switches between the two groups by changing the ground?

I would have loved for you to have shown the waveforms in a graph? (i.e the 2.8 sec. waveform in its time relation WRT the 1.5 sec. pulses waveform if you get what I mean.

Just had one question can a 555 timer ic be used as a mosfet driver and if not are there any alternatives for a mosfet driver

Jason, thanks very much for the informative videos on the 555, including all the math explanations in several of the videos. Just one confusion spot for me is that in the comments of one video you reply that the capacitor at pin 5 should be 0.022uF, in another you state 0.01uF. I have checked the Datasheet from Texas Instruments on the 555 and the Datasheet suggests 0.1uF. While I bow to your vastly superior knowledge, especially in the math department, I have been using the 0.1uF capacitor as stated in the Datasheet, but was wondering why you indicated 0.022uF or 0.01uF in different comment sections?

"They You", thank you very much. That was very instructional...

How could i make a circuit that cycles leds in a row just by repeatedly pressing a single button. so one light is lit, press the button the next lights up and the previous goes out. and so on?

Can you create a circuit with exactly this function with npn transistors ???

sir please describe the working of pnp , npn transister and diode little more ..thanks!

Hey how can I correctly depict the value of resistor required for the LED ?? Thanks in advance

Great video Jason! I feel it may have been helpful for some if you rearranged the formula to derive your Ra, Rb and C values. Or perhaps say your resistor values and then calculate the Cap value needed. Thanks!

can you provide the complete schematic diagram, please i'd like to make it for my project. thank you

Nice video. Would this circuit be considered “intermediate” or “beginners” electronics?

Perfect. Thank you very much your a genius I built one with a 4017 but going to do yours on my next RC build. I will let you know when it's done and post it on my rc Canuck you tube channel Once again thanks and I hope I didn't hurt your brain too much

Can the 555 timer drive 4x Jumbo LED (for lighthouse project - slow rotating light) Would you have a circuit diagram? Thanking you in advance.

Enjoyed it, thank you..

Can this be done using Q and not-Q? This eliminates both transistors and the diode.

Though I am late but two 555 are enough and two transistors are connecting the leds to ground subsequently instead of supplying the timers

Nice Video,Well Explained....

This was interesting. I would like to figure out how to have a group of LEDs, in a star pattern, randomly blink (or strobe flash). One larger LED in the center (5mm white) and 5 smaller LEDs (3mm white) on each point of the star. I do not wish to use Arduino, just electronic components. 555 timers? It'd be interesting to have a field of these stars (50) that would randomly strobe while each LED in each star was doing it's thing. Creates a "twinkling" effect, in the mental image I have. I am the consummate novice, so definitely need help figuring this out. For all I know, I know nothing. Is this idea even possible? Also, here's part of my "novice", why would I choose a 4.7 µF or 47 µF or 470 µF or some other µF value electrolytic capacitor? I understand, I think, why I would choose a particular voltage of capacitor. When and why would I choose a ceramic capacitor? I built a kit that had a .1 µF round ceramic? capacitor in it. It was orange and had 104 stamped on it. I know that is it's capacitance - 10 0000. Works out to .1 µF. Last, how about transistors. There are a blue million options. Why a 2N3904 or a 2N2222 or some other NPN or PNP transistor? I have gathered they have characteristics like how much voltage and amperage they can handle, so that would certainly help in deciding. Is there a comprehensive list showing transistors (or caps or whatever) and their specs dumbed down so even this caveman can do it? I am sure I will have more questions. Thank you, in advance, for your reply.

Can you make a video better explaining the math associated with picking components? I have attempted to plug in values to the formula but I am not sure that I am formatting the numbers correctly.

First time viewer. Great videos! How about throwing in a 556?

this video is very nice plz upload full circuit diagram

could you use a 556 for this project?

what are the other capacitors used in the circuit video not clear enough

Great video! Thanks, really appreciated!

Thumbs up for no music. Great explanation

Great video,but I do agree that using the 555 with the 4017 is a lot simpler. Again,great video.

What is the voltage of the transistor

can you do a video for 3 blinks with a 5-10 second pause

Thanks, really appreciated

how to increase the blink speed of a led after 5 seconds automatically?

you are on electronic beast mode

You are awesome!

This video is very nice.please upload full circuit diagram sir.

You are Awesome!!!

Where are you from? I grew up around the South Georgia accent and I can't quite pin you down. North Alabama, maybe? Thanks for the great tutorial.

Brilliant :)

Awesome!

which transistors did u use

Hello, I have a challenge for you. I'd like to see you, repeat this project, with a IC 558 timer. I tried and got "lost". So let me know. I look forward to hearing from you... Thank you

What does 1.44 stand for? 3:09

Sir,Skinny R&DTel me which transistor number you use in CKT.NPN transistor number...PNP transistor number...

Thinks sir ji

Why 3 555's? Use 2 w/ a SPDT (1-2 demux) switch

Good video

P.S.S. Jason, for a video idea, how about a complete tutorial on how to make a (small, simple-ish) 4-function, 8 digit red led calculator using .36" digits? Another idea: how are 14 segment led's used and is there encoder decoder chips designed for them to simplify? LASTLY, I'd love to see these things done with stand-alone chips, NOT Arduino/other programmable chips. 'Old school' electronics is best for us uneducated lil' sprouts! THANKS, Sarah🙋🏻

why dont you just simply use the control pin of the 555?

Do a Time of flight circuit using 555 ic, some capacitors, photodiode and laser to measure distance via how bright the output led is...delay time to show people how this works

Jason, I love you! Hi, I'm Sarah, and I just viewed this and...I appreciate very much HOW you presented this episode. It's the first of you and your channel I've seen, and you really hooked me, Jason! I've always wanted to be an electronic engineer while at the same time being lousy at maths. Do you have a solution for THIS problem, sir?? 😉 Again, thank you. I can't wait to peruse and watch your other channel offerings! Sarah🙋🏻 P.S. I did Like AND subscribe to your channel! Peace! 😃

Hi my name is Mustafa I’ve just got into electronics, I’m having difficulties in reading schematics and translating them onto breadboard if you can help me out with this I would very much appreciate it, look forward to your reply Thanks

Can people hire you for modeling projects involving blinking lights?

found using 280K Rb gave 2 seconds Thanks for the video

using 555s is a bit of an overkill. The same can be done with some transistors, capcitors and resistors.

nicee...

At 15:14 the three lower LED"s blink four times, not two.