No video :(

Casting 3D Printed Chain

Подписаться 21 тыс.

Просмотров 12 тыс.

50% 1

It's about time that we finally take a look at this interesting technique. Using Phrozen W40 resin to create 2 sections before soldering them together, tumbling, and finishing.
Sonic Mini 8K S: phrozen3d.net/...
Castable Resin W40 Orange:phrozen3d.net/...
Join this channel to get access to perks:
/ @clearmindjewellery
Thanks for watching! If you have any questions leave a comment down below. - Shannon & Dan
Instagram:
/ clearmindcasting
Facebook:
/ clearmindcasting
Website:
clearmindcasti...
#phrozenpartner #sponsored
This video is sponsored by Phrozen3D, the Castable W40 was provided to us free of charge.

Опубликовано:

26 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 48

@avianc6870 8 месяцев назад

this video came right on time! i'm starting a jewelry business and had a feeling id have to wait a while to do chains since it seemed time consuming to print individual links and then piece them together manually but a few days ago i saw a business do what you did, ie printing the link and the sprues all in one go and i was ASTOUNDED. thanks for uploading this! made me a lot more confident.

@ClearMindJewellery 8 месяцев назад

There will be a bit of trial and error per each new design, especially if you are new to lost resin casting, but it does save a lot of time in the long run.

@CrimzonRX 8 месяцев назад

That intro bumps, fam!

@mtastafford 9 месяцев назад

Oh snap. I've been meaning to try this!

@ClearMindJewellery 9 месяцев назад

Do it!! And let us know the results in the discord!

@parthtanna6474 8 месяцев назад

@@ClearMindJewellerycan you share the print settings

@UnratedPlayer21 9 месяцев назад

how did you made the links move after being stuck together after casting? what happened between 3:30 and 3:50? thanks

@ClearMindJewellery 9 месяцев назад

This chain had less then 0.5 mm inbetween the links. As you work with the chain it will loosen more and more as investment comes out of the cracks, you break away any flashing in-between the close joints, and generally release the tension. This is why after the vibratory tumblers it's so much looser.

@noviceartisan 9 месяцев назад

Great process video! Thanks for sharing ^_^ I really need to get polishing sorted, been doing things by hand and admittedly doing a miserable lazy job of it as I've not got the patience using micromotors and tiny wheels! lol

@maximejanssens6210 9 месяцев назад

Same here.. get yourself a tumbler, leave them in for a few hours. Depending on the type of finish you're looking for it could work

@noviceartisan 9 месяцев назад

@@maximejanssens6210 yeah. I think I'll make a magnetic tumbler soon. They're not overly complex and parts needed are affordable :D

@ClearMindJewellery 8 месяцев назад

Just a not that magnetic tumblers using pins can limit types of finish due to finishing media. We've been using walnut shell.

@noviceartisan 8 месяцев назад

@@ClearMindJewellery ah, didn't think about that. Barrel style rotary tumblers are okay for polishing to a finer finish then? Like, I don't have to leave stuff running for 2 weeks before they're good?

@JamesBetts-x1z Месяц назад

How do you feel about the Sonic Saber? I’ve heard mixed things but it looks like it works wonders with support material.

@ClearMindJewellery Месяц назад

It depends on your workflow. It's great for detailed models, soft materials, and really brittle materials. For chunky models in a semi springy resin Dan has a really bad habit of just ripping the supports of lol. But if the material or the model can't handle that we use the Saber.

@josephwisniewski3673 8 месяцев назад

Made it about 1/2 way through. The video was interesting, but not interesting enough to make up for that music. How about some narration instead.

@user-vm6mh5ro2j 3 месяца назад

how to your resin burnout cycle??? hm.. casting burnout cycle

@OOHDAT 3 месяца назад

did you only slice that one link to get it all loose? i was confused by that part. any guidance would be much appreciate!

@ClearMindJewellery 3 месяца назад

At 3:02 you can see the two smaller sections, at 3:35 we are cutting open the single link to then connect the 2 sections, that connection is then soldered closed. To get it loose you simply need to wiggle it, manually breaking any thin flashing of metal bridging the gap between links. The tumblers then get in between the links and remove any areas that were holding the links tight and allow it to flow smoothly.

@jabapiper Месяц назад

3d print file??

@user-or6bj1ml2e 9 месяцев назад

Hi, thanks for the video. Tell me what kind of gypsum you use and the calcination cycle for polymers?

@ClearMindJewellery 9 месяцев назад

We have many many videos on this in terms of our traditional burnout cycle ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-FdckYTV2rJg.html. And will be updating with a rapid burnout cycle following the vlog we recently released. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-K1sa_qGZwU4.html

@TheAndyroo770 8 месяцев назад

Would it be easier to make individual Y shaped links that can be pressed together to make links or would that take longer (I've no experience doing this!).

@ClearMindJewellery 8 месяцев назад

Will depend on design. Designs that print well when connected do them connected, otherwise printing a tree of alternating closed and opened rings would be fine.

@mplatinum 3 месяца назад

Hello Guys , nice video ))) What do you think the time economy using such method ? Like 30% faster than all doing by hands , or faster ?

@ClearMindJewellery 3 месяца назад

Can’t really quantify into a number but if you’re the type of person whom solders all of their links closed then casting everything in place saves a heap of time.

@kyrekelly8811 9 месяцев назад

Where can I find .stl

@johndo3930 7 месяцев назад

great vid i saved it to keepers.. BUT how do you prevent the links casting in one solid piece?? instead by some magic your links seem to be all loose from each other?

@ClearMindJewellery 7 месяцев назад

The magic is that when you’re doing the 3D print, the post processing and the casting, etc. you need to keep an exterior support in place to help keep the links separated. If you’ve printed the piece with enough tolerance, washed the print well, vacuumed your investment well, and not affected that support structure you should have a chain that’s able to move.

@johndo3930 7 месяцев назад

@@ClearMindJewellery Thank you

@ryanware226 8 месяцев назад

Where can I find this file!??

@TurdFergusen 9 месяцев назад

Nice, been trying to design a coiled one in blender.. tricky stuff. Seems like casting it straight is easiest. How do you like the outcome?

@ClearMindJewellery 9 месяцев назад

The straight ones are much easier to print as you don't have to mess with supports etc. Some cuban style links are also better suited to printing/casting flat. We'd try the spiralled tree style with more open link designs and a slightly less soft resin.

@TurdFergusen 9 месяцев назад

@@ClearMindJewellery I wanted to try a looser coiled chain that could then be run through a mill, but beyond my skill atm

@jamessalisbury3320 9 месяцев назад

Hi clear mind, that’s really good, I’ve been wanting to do a ca st like this. how did you keep it as a solid piece when you was sanding it? I couldn’t see and I noticed the sprues was cut off.

@ClearMindJewellery 8 месяцев назад

Tension. Due to the tight fit of the chain and some small residual supports we have to manually releasee then tension in order to get it to move around. So it you are careful you can sand it. You'll notice that as the video goes along the chain becomes looser, especially after the vibratory tumbling.

@jamessalisbury3320 8 месяцев назад

@@ClearMindJewellery ahhhh yes I understand now.🙂 I can visualise what your saying. Yes yes I’m going to have a go at this very soon. Keep up your good work and can’t wait to see what your next video brings. Nice one CMJ team.