Casting Resin Fishing Lures: a step-by-step on making resin copies of your wooden lure carving

Подписаться 27 тыс.

Просмотров 49 тыс.

50% 1

I hope you enjoy this step-by-step tutorial on how to make a DIY resin handmade topwater fishing lure. In a previous video of this lure making series, we went over the process of detail carving a wooden walk-the-dog style bait. These WTD lures have a great action that are perfect for catching freshwater and saltwater fish such as tuna, redfish, red drum, speckled trout, largemouth bass, smallmouth bass, spotted bass and many more. You can use this same process to make other types of lures like poppers, minnows, crankbaits, jerkbaits, wakebaits, walking baits, buzzbaits, swimbaits, glidebaits or any custom bait you can dream of.
TOOLS, GEAR & MERCH (paid links)
www.zimmtexlures.com
MORE LURE MAKING VIDEOS
Making Wooden Glidebaits & Swimbaits: • Making Wooden Glide Ba...
Making Wooden Crankbaits & Jerkbaits: • Making Wooden Crankbai...
Making Wooden Poppers:
• Making Wooden Poppers ...
Wooden Lure Testing:
• Wooden Lure Testing by...
Skills & Techniques:
• Zimmtex Uploads
MORE CONTENT
Follow me on Instagram
/ zimmtex
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide, I may receive a small commission. There is no additional charge to you! Thank you for supporting my channel so I can continue to provide you with free content!

Хобби

Опубликовано:

7 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 95

@guyhallam5023 Год назад

Easily the best ,comprehensive guide to casting I've seen,made a copy of new lure last night,first time ,very nervous,,,,on open8ng the mold I was absolutely gobsmacked,,,absolutely perfect,the finish ,the float,the wire eyes and lead placement all of it ,well done and thank you,this was a game changer for me ,,,,happy days❤

@zimmtex Год назад

Hey, that's great! Glad to hear that my video was helpful to you. I appreciate you watching and sharing your story with me.

@GHuber-xh5vv Год назад

I wish you and your family a peaceful christmas and a wonderful New Year with many happy hours on the water. Thank you for sharing all the good stuff with us with your vids.

@zimmtex Год назад

Merry Christmas to you and your family as well. I really appreciate your support!

@kevinclement9147 Год назад

Great simple explanation of the process. Can’t wait to try it. That’s my winter baitmaking project this year.

@zimmtex Год назад

I'm glad you enjoyed it. Good luck to you on your lure making journey.

@Big88Country 7 месяцев назад

Beautiful lure! Great craftsmanship!

@zimmtex 7 месяцев назад

Thank you very much!

@matcrasher Год назад

This and the molding video are incredibly helpful. I know there are a ton of them on YT, but it's always helpful to see how individual people do things. Thanks for sharing!!

@zimmtex Год назад

Glad it was helpful! I am a big advocate for experimenting with new materials and methods. What works best for me might not work best for someone else, but I think this is a great foundation to start with. Thanks for watching!

@scottmccrary9602 Год назад

Was just searching for a video on this exact topic. Thanks for sharing in great detail.

@zimmtex Год назад

Glad it was helpful! Thanks for watching.

@adwhite804 10 месяцев назад

Great job. Again, good looking bait

@zimmtex 10 месяцев назад

Thanks for watching!

@robhowardlivefree5519 10 месяцев назад

Really good demonstration thanks :)

@zimmtex 10 месяцев назад

Thank you for watching!

@robertjohnmeiers Год назад

I’m in Australia, been waiting for this video. I’m just getting into making lures. Thank you.

@zimmtex Год назад

Thanks for watching. I hope you enjoy lure making as much as I do. Cheers!

@josemanuelfernandezsanjorg7042 Год назад

Great job!!

@zimmtex Год назад

Thanks!

@colbylivingston4319 Год назад

Great video as usual Zim. Happy Holidays to you and your loved ones sir.

@zimmtex Год назад

I appreciate it. Merry Christmas to you as well!

@Cavanpikefishing Год назад

That's just brilliant 🙂

@zimmtex Год назад

Thanks!

@af4od02 Год назад

I just discovered your channel. I enjoy fishing and have never considered lure building. Great video. Thanks. Also, I have subscribed.

@zimmtex Год назад

Thank you so much for commenting and subscribing! I'm glad you found this interesting!

@brandonmartinez5550 Год назад

I'm so glad I found your channel

@zimmtex Год назад

Thank you, I'm glad to have you here and I really appreciate your support!

@striperhunter-ic2wt Год назад

Very nice!

@zimmtex Год назад

Thank you!

@onlyfish Год назад

Thank you for this video!

@zimmtex Год назад

Glad you liked it!

@stanmerrell5390 8 месяцев назад

Thanks Very informative

@zimmtex 8 месяцев назад

Glad it was helpful!

@GravityCorp 9 месяцев назад

Smart idea scale

@zimmtex 9 месяцев назад

Thanks for watching!

@maxkielbasa6079 10 месяцев назад

great

@zimmtex 10 месяцев назад

Thanks!

@asundayfisherman Год назад

Great work as always! For the quantity of resin I think u need to go for cubic centimeters instead of grams due to the different specific weights. With your calculations, a resin that is 1.15 g/cc one component and 1 g/cc the other, u will have 32 cc of resin, but the 4 grams of microballoons have an approximate volume of 28 cc(.15 g/cc). You find yourself with 60cc of material for a lure that is 32cc, with 28cc of waste. Just my 2 cents😁 Merry christmas and a happy New Year !😄

@zimmtex Год назад

Great point! I usually aim high the first time just to make sure I don't run out and then whittle it down. But that is much more accurate for sure!

@HLSluremaking 9 месяцев назад

sooooo helpful def best lure duping vid on yt calculations were helpful, saves me lotsa time (My math grades are in the negatives)

@zimmtex 9 месяцев назад

Glad you liked it, thanks for your support!

@magcolor 7 месяцев назад

👍👍👍👍👍

@zimmtex 7 месяцев назад

Thank you!

@Fksu Год назад

Thx again for the great video! I took a shot at my first cast today and worked great but the lure is not as floaty as I wanted - did you experiment on how far past the 10% can we go to get maximum floatation without compromising strength? Thx!!!!

@zimmtex Год назад

It's great to hear your first mold came out perfect! I have gone higher on the microspheres. The bigger the lure, the harder it is to get it poured in the mold fast enough. Your environmental conditions also play a role in how quickly the resin sets up. You'll have to experiment with your particular lure in your particular conditions to see how far you can push the ratio. Keep track of your recipe because once you perfect it you don't want to forget it!

@youricardoen113 7 дней назад

Little question : why jump from volume to grams? As the specific weight of water is not the same as resin you will have more resin than needed.

@mattiparviainen 11 месяцев назад

6:29 There is an easier method for this as well. Place the pint directly on the scale, don't overfill it like you did here. Then press the lure completely in the water, but make sure, it doesn't touch the bottom or walls. Then just check the weight on the scale. That's the amount of water your lure volume replaces. This works as long as you don't let the lure sink to the bottom. When it does, you'll notice that you're no longer weighing the replaced volume, but the weight of the lure itself. 1grams of water = 1 ml -> 1 cubic centimeter (cube of 1cm*1cm*1cm). Also. Weight of resin is not the same as weight of water. Especially when you mix in the VERY LIGHT microspheres. You did it by weight, not by volume. Hence the excess amount of resin+spheres.. You're mixing up the volume and weight totally in this video.. Great guide otherwise. Thank you :)

@zimmtex 11 месяцев назад

Thank you, that is a really great method! I agree, my method is meant to get me in the ballpark, but I will definately give this a try next time. Thanks for sharing!

@ronvargo203 Год назад

Thats awesome, just started painting my own lure blanks that I buy off of Amazon or where ever. I might try to give it a shot, Do you make your own molds also?

@zimmtex Год назад

That's great to hear! I do make my own molds as well. I've got a video on how to make your own if you are interested.

@guyhallam5023 Год назад

Hi there, watched your video again,im really intrested in what and how you prime your lures for acrylic airbrush paint,,ive got a couple that after i finished them using a car primer filler that have grown small bumps about a week after i uv resined them,do y9u think it was the car spray reacting as this is the first time ive used it,however im new to resin casting and i usually just spray with vallejo white primer,problem is i dudnt expect any reactions so i didnt record which was which,,,,😮😂,problem is im selling them and am expecting a recall,,,,😅ve been selling wood lures for ages and moved to resin for obvious denand supply and conformity ,any tips or insight would be grarefully received ,,,cheers bud,love your channel,massive praise from the UK

@zimmtex Год назад

Hello! Sorry to hear you are having this issue. I haven't personally had this happen to me, but I do have a few ideas for you (in order of my opinion of likelihood). 1) the resin may not have been fully degreased before you primed it. This could result in poor adhesion. 2) the resin might not have been completely cured when you primed it. Differences in climate can affect curing time. If the resin was still off gassing it could result in bubbles. 3) the primer might not have been fully dried when you started painting with acrylic. 4) primer incompatible with acrylic. Resin is a good material and it really increases production of detailed lures once you find the right recipe. Best of luck to you, I hope this helps.

@gedekembar795 Год назад

👍

@zimmtex Год назад

Thanks!

@davidguijogarcia7258 12 дней назад

Alucinante yo los hago de madera y me gustaría sacar copias de mis trabajos me podrías decir dónde podría comprar los materiales q estas utilizando y q envíen a españa gracias un saludo

@Redneckeverything 4 месяца назад

You do not have to let the water overflow, just place the bowl with the water on the scale, zero it, place the lure in the water and submerge it, read the scale. What ever weight is now on the scale is the weight of the lure if neutral boyancy.

@zimmtex 4 месяца назад

Thanks for the tip!

@Drundel 2 месяца назад

Have you ever made any clear epoxy lures with glitter or glow powder?

@zimmtex 2 месяца назад

I've made clear lures and I've put glitter in epoxy, but I haven't put the two together. May have to try it out sometime.

@dep305 Год назад

Hi, how do you treat holes and bubbles that form at the top of the piece?

@zimmtex Год назад

I don't always get bubbles, but when I do, it depends on their size. If it's one or two big bubbles, I fill them with superglue and instacure. If it's a lot of tiny bubbles, you can smear it with bondo and sand it smooth.

@editek5992 Год назад

I have seen people actually using rice instead of water, due to having a closer density to the resin than water. They fill up the mold with the rice (not minute rice type, but actual real unadulterated rice) and then weight the rice.

@zimmtex Год назад

Hmmm, interesting. I've not seen that.

@Outerrythem Год назад

Are these microballoons a potential issue for the lungs after mixing and setting in resin, i.e. during sanding of the end product?

@zimmtex Год назад

I think breathing in any kind of dust or particles is bad. I've been investing in more and more filtration equipment like masks/respirators, air filters and taking time to vaccum the shop. I realize how easy it is to get complacent and we've all been guilty of not using ppe, but I do believe it is really important to take care of yourself.

@blackwoodBoyzfishing Год назад

what sized eyelets are where did you get them¿or what size would you recommend for making trout lures

@zimmtex Год назад

I don't use screw eyes; I make twist wire hardware. I usually embed them at least 1/2 inch but prefer 1 inch if possible.

@Gpchaps 8 месяцев назад

Question about the silicone. Can you pour hot lead or aluminum without ruining the mold?

@zimmtex 8 месяцев назад

I'm not sure if you can pour hot lead onto this particular kind of silicone, but I think Smooth-On makes a silicone for that purpose.

@Gpchaps 8 месяцев назад

@@zimmtex thanks for the quick response.

@tristonhawelu4903 17 дней назад

Where do you get your molds? Or do you make them yourself?

@jasonreynolds4968 Год назад

Thanks for the video, what rubber do you use to make your mold with?

@zimmtex Год назад

I've been using Let's Resin silicone rubber. I have links to most of the materials I use on my website: www.ZimmtexLures.com

@jasonreynolds4968 Год назад

Thank you sir.

@benstoth Год назад

For someone who is thinking about dabbling to avoid the majority of the cost of $20+ lures, what’s the approximate cost per 5” lure (no hardware)

@zimmtex Год назад

To be honest, I don't really know of anyone who saves money making their own lures. Equipment cost, and material waste from trial and error are fairly high. Unfortunately I don't have any numbers to share because I don't currently sell lures and don't track embodied cost. However, I can say the extra cost is worth it to me because I enjoy making them.

@andreacoffetti6784 3 месяца назад

What grit of glass paper do you use to sand the model??

@zimmtex 3 месяца назад

320 grit is about the finest I use on my lures.

@coburnlowman Год назад

The funnel seems kinda big. Does it need to be this big? Ive made plastic injection molds , never this kinda mold making

@zimmtex Год назад

I like to have a bigger funnel because this resin sets up really fast and I need to get it in the mold quickly. Thanks for watching!

@rodneybanks8283 10 месяцев назад

What type of silicone is the mold.... Would love to see a video on how you made it.🔥🔥🔥🔥🔥

@zimmtex 10 месяцев назад

Thanks for your interest! Here is a link to my silicone mold video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-PwpMU4kvSGg.html

@rodneybanks8283 10 месяцев назад

@@zimmtex thanks a billion 🙏🙏🙏

@josephdasaro4368 Год назад

Where can I get the mold u r using thank you?

@zimmtex Год назад

I actually made it, you can check out my video on how to make one here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-PwpMU4kvSGg.html

@jimscoggins1526 8 месяцев назад

I have heard of makers baking their resin lures. I can’t find any info on what temp and how long. Can you help with this

@zimmtex 8 месяцев назад

Yes, you can bake some kinds of resin to achieve harder resin. I checked on the Smooth-On 325 and it says you can post-cure at 150 degrees for 4-6 hours. I reccomend checking with the manufacturer for any guidelines on baking.

@jimscoggins1526 8 месяцев назад

@@zimmtex thank you!! Love your content!