Silicone Mold Making: a how to guide on making a mold for casting resin fishing lures

Подписаться 28 тыс.

Просмотров 116 тыс.

50% 1

Please join me for this step-by-step tutorial on how to make a DIY silicone mold for casting your own resin handmade fishing lures. My lure making process starts with detailed carving a wooden custom bait for either saltwater or freshwater. Then I walk through everything I do to make a silicone mold from start to finish. Whether you are making poppers, minnows, crankbaits, swim baits, glide baits, GT lures, big baits, topwater lures, suspending baits or sinking baits, these amazing resin copies are perfect for chasing whatever fish species you want. I hope you enjoy!
TOOLS, GEAR & MERCH (paid links)
www.zimmtexlures.com
MORE LURE MAKING VIDEOS
Making Wooden Glidebaits & Swimbaits: • Making Wooden Glide Ba...
Making Wooden Crankbaits & Jerkbaits: • Making Wooden Crankbai...
Making Wooden Poppers:
• Making Wooden Poppers ...
Wooden Lure Testing:
• Wooden Lure Testing by...
Skills & Techniques:
• Zimmtex Uploads
MORE CONTENT
Follow me on Instagram
/ zimmtex
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide, I may receive a small commission. There is no additional charge to you! Thank you for supporting my channel so I can continue to provide you with free content!

Хобби

Опубликовано:

9 дек 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 135

@bhough410 Год назад

Great vid, straight to the point with thorough directions and no wasted footage! Videos like this are why I use YT. I will be casting a chess set(s) with resin. Prepping for that I've just spent hours watching stay at home moms and grandmothers try to to do what you just did here...If all of those other videos were combined it wouldn't give the necessary details you provided! Thank you for not adding generic movie clips throughout the video, not sure why many in the woodworking community started doing this?! My time is precious to me, if I wanted to watch movie clips I would look them up instead of searching what I'm trying to make. I don't fish, a couple of my brothers do along with their kids. I would be interested in making some fishing lures. Would love to see you post a series from start to finish (maybe multiple series for different lure types) making lures covering all the details (especially the painting process). I suspect you would have 100k subs in no time sticking with the format of this video. Many thanks for posting, hope you keep the vids coming! You've earned a new sub.

@zimmtex Год назад

Thank you very much for your kind words! I am very happy that you found this useful and really appreciate your comments. I have thought about making a chess set but never found the time. Good luck to you on your project!

@samuelmachowski8996 Месяц назад

indeed

@AdventureFreak86 9 месяцев назад

Toothpick. "We need to kinda eyeball." Procedes to cut perfect length. Great video. Subscribed and liked!

@zimmtex 9 месяцев назад

Awesome! Thank you!

@Van1l1a.G0r1l1a Год назад

Just something I've learned from doing this for quite a few years... To aide with the bubble issue, hold the cup able a foot above the mold and pour very slowly so that it is a stream about the width of a coffee stirrer. Also pour in one corner and let the silicone work its way across the mold so air is pushed out of the undercuts of the master and doesn't get trapped. This has always worked well for me. Try it and see how it does for you. Great videos BTW. I always enjoy your content.

@zimmtex Год назад

Thanks, I will give that a try! I appreciate your interest and support!

@stripermanly Год назад

Excellent demonstration. I’ve purchased everything needed to make molds a year ago, but never had time to devote making one. Soon I hope to do so

@zimmtex Год назад

Thanks! It certainly does open up more possibilities. I appreciate you stopping by!

@adwhite804 10 месяцев назад

Great carving master . Good looking lure

@zimmtex 10 месяцев назад

Thanks, I'm glad you like it!

@shawnfreeman4768 Год назад

I really enjoy your content. I plan on giving this a try in the near future and appreciate all the detail you provide.

@zimmtex Год назад

Glad to hear it, thanks for watching and commenting!

@shawnfreeman4768 Год назад

@@zimmtex can I ask what type of wood you use?

@zimmtex Год назад

Sorry for the slow reply. I have really been liking basswood lately.

@tonyduran4764 11 месяцев назад

Great step by step. Thanks

@zimmtex 11 месяцев назад

Glad it was helpful!

@heavyrain8821 Год назад

This is a perfect lure , i just want to make an easy one . Amazing, thanks for sharing

@zimmtex Год назад

Glad you like it!

@tanqemali3856 23 дня назад

Grat work 👍👍👍

@user-vj1wh6md6r 7 месяцев назад

Very nice work a true artis

@zimmtex 7 месяцев назад

Many many thanks!

@jesseguerra9817 Год назад

Nice video! Let's see how the lure turns out. 👍

@zimmtex Год назад

Thanks! Coming soon!

@Cavanpikefishing Год назад

Brilliant would love to make my own👊

@zimmtex Год назад

Go for it!

@jhnnyboy100 Год назад

Awesome!

@zimmtex Год назад

Thank you!

@sssrp80 Год назад

Great video, you are light years ahead of me. The only advice I can offer is when shooting your finish nailer look at the end of your nails there is a bevel. This will cause the strays that wasn't too shoot wild through the sides of your wood. I'd you keep your gun 90° off of how you where shooting. You'll have far less strays when building molds or doing stain grade finish work around the house. Just a tip I picked up many years ago. GREAT VIDEOS!!! PLEASE KEEP THEM COMING

@zimmtex Год назад

Thanks for watching and for the tip! I'm getting a little better with the nailer, but still get a stray every now and then. Got to watch that angle...

@UzunKamis Год назад

Nice job!

@zimmtex Год назад

Thanks!

@ozzieguillen1109 Год назад

Another good video. I’m hoping your next one goes into how to add weight. Thanks for sharing

@zimmtex Год назад

Thank you! It's probably not the next video, but I do intend to make that one soon. I appreciate your interest and support!

@tlbx57 Год назад

Nice work. I would advise pre-drilling the mold box screw holes with a smaller bit to avoid the splitting.

@zimmtex Год назад

Thanks for the tip and for watching!

@anthonycatania5613 9 месяцев назад

Never thought of using my dab rig tools for sculpting clay... normally used for smoking high concentrated THC, but I do like this practical use as well.

@zimmtex 9 месяцев назад

Thanks for watching!

@antoniobernalrendon2981 Год назад

Gran vidio un saludo 🤚🙏

@zimmtex Год назад

Thank you and welcome!

@antoniobernalrendon2981 Год назад

Gracias

@antoniobernalrendon2981 Год назад

Gracias ha usted por enseñar la técnica que nos vale a todos

@joshpederson5926 Год назад

You can also wet sand with 1000 grit sandpaper it gets them like glass. Works great.

@zimmtex Год назад

For sure! Thanks for watching!

@bluesteel5841 Год назад

When i worked for a big tackle company i use to use bondo..that was around 25 years ago.

@zimmtex Год назад

I have only used it to fill ballast holes, but I can see how it could make a good lure.

@etothelij 10 месяцев назад

Mix equal parts petroleum jelly to equal parts mineral oil - best mold release ive found. 0 mishaps in 25+ 2 part molds

@zimmtex 10 месяцев назад

Excellent tip, thank you!

@jonsecrist84 Год назад

The thing w Legos is yea they may be exspensive but u can use them over and over again..love the video

@zimmtex Год назад

That is true. Thanks for watching!

@bhough410 Год назад

Have seen lego & knock offs at thrift stores many times.

@matcrasher Год назад

Love your videos! Are you doing the heavy sanding with an old sanding belt or is that something else? I've been using sanding belts but they seem extremely stiff. Thanks for sharing all this greatness!

@zimmtex Год назад

Thank you! I get thin rolls of sandpaper from the auto parts store in different grits. They start out kinda stiff, but it doesn't take too long for them to get more flexible. I appreciate your support!

@Felix_Leyva Год назад

Great video, thanks for sharing. I´m doing some resin lures and find that after the first epoxy coat, some bubbles (air) appear. I guess is air or microballoons trapped in the resin. Any suggestion to solve this problem? Thanks!!

@zimmtex Год назад

Great to hear from a fellow lure maker! I don't think your issue is microballoons. One thing you want to be sure to do is let your resin fully cure before you try to clearcoat it. If you try to paint and clearcoat it too soon after pouring, it could still be off-gassing. Another thing I have learned (with wood) is that you don't want the lure to be warm or it will off-gas, like using the hair dryer to dry the paint and then immediately trying to clearcoat it. Hope this helps! If you have more questions, please leave a new comment so I will be sure to see it. Replies to comments do not pop up in my feed and I have too many to go back and search at this point. Thanks for your question and support!

@williamharkenrider3842 4 месяца назад

true art

@zimmtex 3 месяца назад

Thank you very much!

@441rider 4 месяца назад

Watching for inspiration I am molding chair arms same shape several kg of 2 part 30 silly seal. 28"x12"x3.5" will do the skin coat.

@zimmtex 4 месяца назад

That's cool, hope it works out for ya!

@haroldbolton3383 Год назад

Great video. How would the silicone you are using hold up to the heat of pouring soft plastic baits?

@zimmtex Год назад

I'm not sure but I know there is such a thing as high temperature silicone.

@magcolor 6 месяцев назад

👍👍👍👍👍

@zimmtex 6 месяцев назад

Thank you!

@vicgarbutt3310 Год назад

if you pre-drill a pilot hole first, the diameter of the shank of the screw or a bit smaller, it won't crack the particle board or MDF or even pine.

@zimmtex Год назад

I did that, but maybe should have used a slightly bigger bit. Oh well, it got the job done.

@phillipw.hilgert563 Год назад

Great video. How do you get the clay bed so flat and level? Mine always come out like some kind of topology map. TIA

@zimmtex Год назад

Thanks! I put a centerline mark all the way around the inside of the box which helps a lot. You could also use a block of wood to tamp and level.

@frankoosterwyk9949 8 месяцев назад

👍👍

@zimmtex 8 месяцев назад

Thanks!

@CaptainBax Год назад

I hope this isn't nit picking but you should pre-drill those screw holes a bit larger, something closer to the size of the screws. As long as the thread has something to bite on to it should hold, that type of trim board doesn't have much give in it. Probably because of the glue used to make it dries hard and that is why it's cracking when you are putting those screws in, where as timber has some give in it . Great tutorial by the way, really liked the carving you did on the head & gills, is this a walk the dog type lure or a stick bait.

@zimmtex Год назад

Well, I actually did drill those out bigger (off camera for time) but not quite big enough I guess. I bet you're right about the glue. In any case, this is a topwater WTD. It is a scaled down version of the one I made without power tools which had an incredible action. However, I don't see why I couldn't add a lip and make it a crankbait. I suppose with enough weight I could also make some sticks. The great thing about resin is that I can experiment with it. Thanks for watching and commenting!

@mihajlonikolic4823 Год назад

The tool on 9:45 is dental knife and its used by dental technicians. There are a lot of tools useful for lure making that are used in dental techniqe. You can use plaster cast for molds, there are a lot of type of it. Also steel wire is very useful, becose its stainless and you can bend it easily.

@mihajlonikolic4823 Год назад

The silicon is also very useful, becose you dont have to melt it.

@zimmtex Год назад

I've noticed that there are a lot of great dental tools for lure making. Thanjs for watching!

@capatainnemo Год назад

Did you know that you can melt plasticine with a little heat and pour it into the mould box, then as it sets up again you can press the buck / form into it for a really good mold

@zimmtex Год назад

I did not know that. I haven't gotten into soft plastics so far. Thanks for the tip!

@capatainnemo Год назад

@@zimmtex plasticine is like the non drying clay you used

@candymatek3 Год назад

Can the plasticine be reused after melting it? And how do you melt it?

@johndculp Год назад

Put your clay in the oven and ONLY turn on the light. This is what we used to do to dry out a newspaper! You can pre-warm the oven with the light and I would say leave it in there 15 min. It's not too hot and should work great.

@zimmtex Год назад

Excellent tip, thank you!

@jameswright9647 Год назад

Awesome, could you possibly create your masters out of clay and then use this process to create the molds?

@zimmtex Год назад

Yes you could!

@roywright5485 9 месяцев назад

Would you need a high temperature silicone to handle pouring lead in the mold?

@zimmtex 9 месяцев назад

Yes, I think so. Check out Smooth-On, I belueve they have a product just for that.

@marksouthern9713 Год назад

Very nice work. A quick question have you or anyone out there used a silacone mould to cast lead? seen a Japanese site do it but could not understand s word of it.

@zimmtex Год назад

I have not; I know there are different kinds of silicone, some made for high heat. I guess I just haven't had the need to cast lead in silicone yet. Thanks for watching!

@bhough410 Год назад

There's def vids on yt with english speaking people doing it with pewter.

@gedekembar795 Год назад

👍

@zimmtex Год назад

Thanks!

@gedekembar795 Год назад

👍

@patrickkavanagh7371 Год назад

I have a polurethane rubber emblem and want to make a mold of it can I pour silicone rubber over it, will that work or would it stick permanantly do you know?

@zimmtex Год назад

I would think so. Just be sure to put plenty of release agent on it first.

@CustomHardTacklesOJC 5 месяцев назад

what wood did you use to carve your bait out, i tried pine 2x4 and it would splinter off everywhere and couldn't do the scales.

@zimmtex 5 месяцев назад

Try basswood or poplar for carving. Both have a nice fine grain and are pleasant to work with.

@gavrilteudan8759 4 месяца назад

What's clay name and type if don't mind what vaseline do you have, use. Where did you get the special tool you used?

@zimmtex 4 месяца назад

You can find links to most of the products I use on my website here: www.zimmtexlures.com/productlinks

@miamiwax5504 Год назад

Would this work for lead? If not what material should you use?

@zimmtex Год назад

Although silicone can handle high temperatures, I'm not sure if it would work for hot lead. I've not tried it, bui I think Smooth-On makes a product for lead molds.

@tonybougharios2810 10 месяцев назад

Hello once i have the mold what is the markwt name of the aubstance to dill in ifbi want to make a simple topwater skalicone lure? Thank you . Awaiting your rwply . Please agree sear sir the expressions of my seepeat thoughts . Best regards

@zimmtex 10 месяцев назад

I haven't tried making any silicone lures, but I have another video on making resin lures here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-g5zhm20TjAw.html

@abbysutcliffe9152 Год назад

If u put ure pencil on the line first then bring ure square up to it then you get a lot more accurate line

@zimmtex Год назад

Thanks for the tip, I'll try to remember!

@darthbane52 Год назад

I made have overlooked it, but what kind of wood did you use for the master?

@bhough410 Год назад

Was curious about that too. Wouldn't be surprised if it was bass wood, as it's often used for carving and has a similar appearance to the wood he had...the irony of it being bass wood.

@zimmtex Год назад

This one is basswood which I have been favoring lately. Poplar is also good; really anything with a fine grain that is easy to carve. I don't really like balsa because it is too soft and doesn't hold detail really well.

@taxnlips Год назад

Can you link the materials for silicon? I’ve seen a few brands and don’t know what to use

@zimmtex Год назад

I'm using Let's Resin brand. You can find links to m9st everything I use under 'Tools of the Trade' here: www.zimmtexlures.com/productlinks

@AsherStevens-mq5fn 20 дней назад

What clay do u use

@trinidadrios8240 Год назад

Ese silicón rubber soporta altas temperaturas???

@trinidadrios8240 Год назад

hot lead

@zimmtex Год назад

I don't think this one does, but I know there is such a thing.

@bcrew33 Год назад

What kind of wood do you use?

@zimmtex Год назад

Lately I've been working with basswood but I also use poplar.

@RobertSloan-js3ro 2 месяца назад

What kind of silicone do you use

@zimmtex 2 месяца назад

It's a platinum silicone. If you are interested, I have links to most of the products I use on my website here: www.ZimmtexLures.com

@joey-cn6mt Год назад

Prey drill maybe both parts??

@zimmtex Год назад

You bet!

@ttortuga6084 10 месяцев назад

What is the name of the dough you put under the mold

@zimmtex 10 месяцев назад

It's a non-drying modeling clay. I have links to most of the products I use on my website: www.zimmtexlures.com/productlinks

@swimjigman953 Год назад

What type of clay do you use?

@zimmtex Год назад

This is a non-drying clay. You can find links to most of the products I use on my website: www.zimmtexlures.com/productlinks

@turbolife5912 Год назад

I'm thinking mold release by it self isn't enough

@zimmtex Год назад

It can be, but I don't like to risk the silicone sticking.

@Meysam-lure 9 месяцев назад

Put a video of the blaze test of this bait and it definitely does not have a good blaze because it is epoxy

@Daryl185 Год назад

Instead of making a mold box could you use an old Tupperware container

@zimmtex Год назад

Maybe, if you cut the bottom off your container. You really need to be able to access both the top & bottom.

@Daryl185 Год назад

@@zimmtex ty will give that a try

@BHARGAV_GAJJAR Год назад

Geez I clicked because thumbnail looked like an airfoil

@zimmtex Год назад

Ha! How cool would that be!

@Loucfr 3 месяца назад

Should have just got a 3d printer. Would have saved so much time. Nice work though!

@zimmtex 3 месяца назад

Thanks for watching!

@sallom531 Год назад

careful, always put some mask on

@zimmtex Год назад

Yes, I highly recommend it! We all forget sometimes, but it is really important!

@ronaldhitchcock4356 Год назад

You can't zero out the scale with weight already on it? If you hit the tare button it will zero it out. Then you won't overload it.

@zimmtex Год назад

Thanks, I'll have to try that! Most of the time I'm using small amounts so it doesn't matter, but every once in a while I need more capacity.