Casting Rings & jewellery at home - Lost Wax & PLA methods - by VOGMAN

Подписаться 129 тыс.

Просмотров 181 тыс.

50% 1

A young student named Conor sent me some wax rings he'd carved. he had no way to cast them and asked if I would did it for him. I was happy to to have a go at casting his rings, and I even made one of my own from PLA on my 3D printer
🔹 SUNLU FINAMENT ON AMAZON 🔹
This is the filament I use for _Lost PLA Casting_.
Amazon UK ▶ amzn.to/3zysJVa
Amazon US ▶ amzn.to/3zyCVNa
Amazon CA ▶ amzn.to/3PnqrMD
💚 PLEASE SUPPORT THIS CHANNEL 💚
The price of a cup of coffee can really help me grow my channel. If, and only IF, you can spare a little, please consider becoming one of my Patrons. You can read more about this here:
🟢 / vegoilguy 😃
Or if you prefer to make a PayPal donation, you can do that here
🟢 www.vegoilguy.... 😁
** EQUIPMENT & PRODUCTS USED **
I often get asked where I buy my investment powder, what type of oven do I use, etc, so to make life easy I’ve made a list with links on my website here vegoilguy.co.uk...
** GREAT RINGS & MORE **
These guys make excellent rings, pendants and more bit.ly/3dHl2P8
Get 20% discount with the coupon code VOG20
** DISCLAIMER **
This video is for and educational and entertainment purposes. Do not try and replicate what you see here without proper equipment, safety gear and a thorough understanding of the processes involved. It is a VERY dangerous.
** ETSY STORE **
I sell a few castings on Etsy. Proceeds help me maintain my channel.
www.etsy.com/u...
🔹 MY LINKS 🔹
▶ vogman.co.uk
▶ / thevogman
▶ / the_vogman
▶ rumble.com/c/c...
▶ vogsmerch.mysp...
▶ etsy.com/uk/sh...
▶ / vegoilguy
#metalcasting
#vegoilguy
#vog

Хобби

Опубликовано:

5 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 241

@tobhomott 5 лет назад

Aluminum bronze might even be oxidation resistant enough to prevent Conor's fingers turning green from wearing copper alloy jewelry. Good choice! Why change your channel name, if I may ask?

@vogman 5 лет назад

You're the first one to ask : ) Three man reasons.... 1) I'm fed up with people saying, "I was going to subscribe but when it said 'VegOilGuy' it put me off." I don't want to put anyone off with a name when I can do that perfectly well with my videos : ) 2) I fancied signing some of my work, and fitting 'VOG' onto something is much easier than 'VegOilGuy.' 3) Some folks were already calling me VOG for much the same reason as 2. 4) Okay, there's four not three, it's not really a name change - just an abbreviation : )

@tobhomott 5 лет назад

@@vogman hey, at least they weren't complaining that they couldn't figure out how to pronounce it... 🙄

@vogman 5 лет назад

I have to be honest, I wondered exactly that as I typed your name : )

@TechNick3D 5 лет назад

If you guys know how to prevent aluminum bronze from oxidizing, let me know. I did some rings out of it as practice, and they polish amazingly but turn black after a couple days of wear.

@vogman 5 лет назад

That doesn't surprise me. They're decoration pieces really. Precious metals are precious for a reason... our ancestors realised they could wear they and they'd stay shiny : )

@bigstackD 5 лет назад

Ballsy challenge you had here matey great results ya big showoff! 👏🏻😁👍🏻🍻🍻🍻

@vogman 5 лет назад

I was nervous mate. If it had gone wrong Conor would have lost all his work. I was lucky I guess : )

@vogman 5 лет назад

Of course. BigD is a hero and a mate : )

@mass4552 5 лет назад

When Conor gets a way to cast, he is going to be doing some fine work. He has the aptitude to do great things in jewelry designing. It's good that you gave him a hand and perhaps when he see's the result it will give him the drive to set himself up in an interesting hobby or even a career. Thanks for sharing this with us.

@vogman 5 лет назад

Nicely said. Conor's done a great job here : D

@ToddLarsen 5 лет назад

I used to use that blue tape on my printbed and had a heck of a time getting prints off of it so I now only user cheap glue sticks and I can pop the prints of really easily and have had good adhesion to my mirror plate on my bed. Great stuff! Thanks for sharing and as always keep building👍

@vogman 5 лет назад

I tried glue sticks, hair spray, masking tape... nothing worked. But then I found a tape claiming to be made for that purpose, and it DOES work. Well worth the money : )

@SamVidovich 4 года назад

I didn't know about lost PLA -- that's a real game-changer. Thank you so much for the video!

@vogman 4 года назад

It works well. I've even made gears with it. But if you want perfect detail, castable PLA will work better.

@MeltandCast 5 лет назад

Love that Celtic style ring - looks the bomb. Must have taken him a long time to carve... super job mate 🍺👍👍👍

@vogman 5 лет назад

He's clearly a talented guy with plenty of time ahead of him to hone his skills : )

@Del350K4 5 лет назад

This is a heart-warming video. The wax and PLA rings came out very well too.

@vogman 5 лет назад

Many thanks Del. I hope your next project is well underway : )

@Del350K4 5 лет назад

@@vogman I´m in the "post commitment, beginning to gather materials" stage : )

@TheDutyPaid 5 лет назад

The best part of any Friday.

@vogman 5 лет назад

Thanks mate : )

@wemme 5 лет назад

Very nice thanks for sharing. The copper/aluminium looks great

@vogman 5 лет назад

In this case, it's poor man's gold : )

@johndelaney6558 5 лет назад

The rings turned out great. I bet Conor appreciates the casting either way.

@vogman 5 лет назад

I hope so John. I haven't heard from him yet. He might still be in shock : )

@susanserwatka931 5 лет назад

Your did a wonderful job especially considering it was your first time casting rings. I'm sure Coner will be happy.

@vogman 5 лет назад

Thanks Susan. I hope Conar is pleased with the results : )

@G40bv 5 лет назад

Awesome video. You're getting better every day.

@vogman 5 лет назад

Thanks Ricardo : )

@daredeviledoa 4 года назад

that was really nice of you to cast that for him

@vogman 4 года назад

We did each other a favour... I got to try casting the rings and he got the results : )

@josetenorio8752 5 лет назад

I love you small personal touches you add to your casting techniques, great job and I don't think you let Conner down the rings look great!!!

@vogman 5 лет назад

Thanks Jose : )

@awldune 5 лет назад

Very nice results! I am impressed with the uniform thickness of the rings. I hope Conor will share some photos/video of his finished rings.

@vogman 5 лет назад

Let's hope so : )

@MapBot11 5 лет назад

Jewelry is often cast using centrifugal casting. Myfordboy used lost PLA to do centrifugal casting in a video earlier this year. Check it out!

@vogman 5 лет назад

I'm a subscriber and fan of Myfordboy, Jake, so you can be sure I've watched it. You can actually find his comments on some of my videos, which was very kind of him. The only drawback of centrifuges, if you ignore molten metal spinning by you head, is that need to know the precise amount of metal needed in your casting. This is poured into the basin outside of the flask, and the centrifuge pushes the metal inside. I'm not that precise in honesty. But fortunately with a homemade vacuum system like mine (ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-EGNnH_xbjR4.html) this isn't a problem. Thanks for your input : )

@johnmccanntruth 5 лет назад

Nice job. Good of you to do that for him.

@vogman 5 лет назад

It was nice of him to trust me. He's clearly a good guy : )

@bubblewrapfred 3 года назад

this is so cool!!! I’ve always wanted to design something and have it cast in metal

@ninil.9287 5 лет назад

Nice. I want a big pile of rings and jewellery now. Thanks for that ... :D

@vogman 5 лет назад

If only these were gold instead of bronze : )

@jeffharmon7927 5 лет назад

Awesome job hope he's happy with them your trinity knot turned out really nice👍👍

@vogman 5 лет назад

Thanks Jeff. It was a quick and dirty job on the PLA ring this time, so the results thrilled me. With a bit of TLC beforehand, that ring would have come out beautifully : )

@HunterValleyDan 5 лет назад

Great video Geoff! As previously stated, it's a bloody gutsy effort! But, clearly you have the confidence of your followers. (I just had a Monty Python moment... "He's not the Messiah..."!) Good results overall too! Damn! Now I'm going to have to cast that Celtic ring for the missus! In the "special" alloy I was referring to.. Well done mate! Cheers. Dan

@vogman 5 лет назад

"... He's a naughty boy." But it's been a while. And surely the best line is, "Are there any women here...?" Yes I was a little nervous. A lot of Conor's hard work could have literally gone up in smoke. Phew! Do a nice, slow print (I rushed mine) and you'll be in the wife's good books for sure.

@ManypossibilitiesGaoLY 4 года назад

Is a spin caster necessary?

@Scimi2000 5 лет назад

Those turned out great!

@vogman 5 лет назад

Thanks Patrick : )

@wayneparker4708 5 лет назад

Another perfect cast! Your experimentation always yields great results. The additional or correct sprue placement is something often overlooked, even by professional jewellery casting companies. What as the final tree weight?

@vogman 5 лет назад

Thanks Wayne. Actually I never weighed it : )

@mindofmadness5593 5 лет назад

I think Conner is going to be happy. I'm in the process of carving my wedding rings myself-the wife is getting a rig of bear claws stylized in my own design I use as a logo for my photography biz, going to be set with a stone tho not sure which stone, mine is going to be a ring of Fruit Loops-trying to figure out how to use different metals for each one [[her nickname is Fruit Loop]].

@vogman 5 лет назад

Mark, that's AMAZING. I'd love to see pics when they're done. Please take silicone molds before you risk any castings. I'd hate for you to lose all that hard work. Are you going to do the casting yourself or maybe hand it over to a jeweller?

@mindofmadness5593 5 лет назад

@@vogman Sure! And the silicone mold. That totaally escaped me. Also considering designing it in photoshop then using a 3d program to clean it up and size it, print and cast-if I go that route I will have the fikkes as I'm working on some other unique pieces as well but the silicone is definitely getting filed into my small brain, thanks!

@vogman 5 лет назад

I was lucky with today's video. They've gone wrong in the past. There was always a gamble I'd lose Conor's work. Don't take that risk : )

@mindofmadness5593 5 лет назад

@@vogman My work *never* goes wrong. I have, however, discovered thousands of ways to do things. :D

@matthewh6424 5 лет назад

Really cool! I'd love to see more affordable metal recipes and how the different metals look

@vogman 5 лет назад

Thanks Matthew : )

@MelDaltonMusic 5 лет назад

Same here; can you suggest a guide for other metal ratios?

@gardenwaster 3 месяца назад

well done both of you

@vogman 3 месяца назад

many thanks

@MurdaSeen 3 года назад

how would you be able to tell the amount of gold you'll will need for the mold afterwards?

@liviut.7919 5 лет назад

Like and watch. Respect from Transylvania.

@vogman 5 лет назад

Thanks Jack : )

@scarletletter4900 5 лет назад

Have you considered trying to make a magnetic induction foundry? I've been seeing a lot of videos here on the RU-vids of people demonstrating how it can heat and even melt metal for casting. It makes me think that if someone were willing to scale it up enough there might be a very green alternative to using fossil fuels for melting metals with exceptionally high melting points like steel and iron.

@vogman 5 лет назад

I did see a company advertising them on banggood I think. I wrote asking if they wanted me to review one but they never replied... at all. That made me sceptical. I may not be the biggest channel on RU-vid, but I hope I have a reasonable reputation for casting. So ignoring me suggested they didn't like the idea of someone who melts metal a lot having a go. Of course I could be wrong there and it might simply have got lost in the system...

@scarletletter4900 5 лет назад

@@vogman That's a bummer, but it gave me the idea to try and find some DIY instructions online; inductionheatertutorial.com/ . I think the person who did this just wanted see if they could do it, or were working on college project, and posted it online so others can repeat the experiment. Ether way, it's something to build off of, and one thing I know you are very good at is building on a good foundation. Keep searching and researching. I have faith that you'll pull this off.

@Thewulf56 5 лет назад

They turned out great, nice work. 👍👍👍🐺

@vogman 5 лет назад

Many thanks : )

@brotherhoodofsteel4751 5 лет назад

Awesome can't wait for the next video.

@vogman 5 лет назад

many thanks : )

@brotherhoodofsteel4751 5 лет назад

@@vogman was curious do you reuse the parts that you use as sprues?

@vogman 5 лет назад

Yes. The leftover sprue part go into the crucible next time around. That way I know I've got enough metal to cover the sprues and only need to think about metal for the parts : )

@arloames4517 5 лет назад

I have an SLA printer, a Peopoly Moai. Would be happy to print some rings for you to cast. I get great resolution. Think you'd prefer it over your FDM prints.

@vogman 5 лет назад

Hi Arlo. That's a very generous offer. Drop me a quick line here and we'll have a chat... www.vegoilguy.co.uk/contact_me.php This form will allow us to exchange email addresses privately : )

@Rouverius 5 лет назад

Hey, great job, Conor. And really nice pour Mr. VOG.

@vogman 5 лет назад

Thanks very much : D

@kelsallcrystal5213 8 месяцев назад

What material did you use to print the ring?

@TANUSHPRAKASHAN 3 года назад

I like the gold ring

@vogman 3 года назад

Many thanks 😁

@castingtechnology3338 5 лет назад

Great show! I am absolutely jealous of your lost wax technique. I must try again.

@vogman 5 лет назад

Thanks Chris : )

@orlandovelastegui1391 4 года назад

Thank you for your expertise!!! I’m about to 3D print some rings with PLA then cast them. I work in a plating Shop so o want to plate those aluminum rings to Gold.

@vogman 4 года назад

Glad if I helped : )

@mikehors7351 5 лет назад

Nice cast rings looks good.

@vogman 5 лет назад

Thanks Mike. I hope Conor will be pleased : )

@EgonSorensen 5 лет назад

It's finally weekend - and what an excellent beginning :-) Good thing come to those who wait, but better things (and rings) come to those who don't give up. Have a great weekend everybody!

@vogman 5 лет назад

Good weekend buddy : )

@wtechboy18 3 года назад

there's a couple companies that make FDM wax filament for lost-wax 3d printed items.

@louwclaassens4988 5 лет назад

Great video. Thank you. Coincidentally, I printed the very same ring from Thingiverse a month or so ago to test the quality of print. I am keeping it for my first cast. I am challenged with building a furnace. But I'll get there.

@vogman 5 лет назад

That's an ambitious first cast Louw, but if you use the same technique as me I think you'll get there : ) You know where I am if you need advice on electric or standard furnaces my friend. You'll do it, I'm confident of that.

@louwclaassens4988 5 лет назад

@@vogman electrical?!! This is South Africa. Cost of electricity is rising excessively and some days we don't even have any. So gas or charcoal... I am not sure how I will do my burnouts yet. My first attempt many moons ago involved oven for wax melt out and then into a charcoal starter chimney. Left it burning overnight and next day it was cold and small cracks. I cast the brass into a cold mould and it came out OK. Some definition lost though.

@vogman 5 лет назад

Now I would have thought Solar would be big in your sunny climes.

@louwclaassens4988 5 лет назад

If only I had a Fresnell lens. Summer temperatures up to 43 deg C here by us.

@vogman 5 лет назад

Mate... no. It was 22C the other day and I was wilting, honestly. I very hot summer in the UK can hit the early to mid 30's, but they are years apart. The 40's... no. I couldn't cope.

@carianin5293 5 лет назад

Impressive.

@vogman 5 лет назад

Thanks : )

@crowcarmichael2917 10 месяцев назад

Does aluminum bronze only turn black or is it susceptible to bronze disease? Does it turn your skin green? Great cast btw.

@hangebrauck1 4 года назад

Great video

@vogman 4 года назад

Glad you enjoyed it

@BackYardScience2000 5 лет назад

Very cool!

@vogman 5 лет назад

Many thanks : )

@katgwatch 4 года назад

Pleasant to watch and super informative! :)

@vogman 4 года назад

Glad you enjoyed it!

@wije6775 10 месяцев назад

Hey! I'm a design student from the netherlands, i would love to try the lost PLA casting, is that printed sprue base downloadable somewhere?

@Regdiggs 9 месяцев назад

Did you use a vacuum to assist the pour?

@MacGuyver84 5 лет назад

Those came out amazing. Gingery lathe needs your help.

@vogman 5 лет назад

It's been done by a few others I think : )

@ArtByAdrock 5 лет назад

Cool rings 👍🏻 I haven’t seen the foundry in a while. Do you still use it? When you printed the ring, what mm height did you use? Great job 🍺🍻🍻

@vogman 5 лет назад

Thanks mate. I'll be honest I don't recall. I use Cura which does all the clever thinking for me. I had it on draft I think.

@Ozzy2341 2 года назад

Beautiful video, what type of resin do you use for casting ? Please link

@vogman 2 года назад

There's lots of different resins available and I've reviewed a few as you can see here ru-vid.com/group/PLOzaysTbaKi4bt4yl3WQI6rymVLknpEAG My suggestion for pretty much everyone is Siraya Tech Cast as it's cheap and very good.

@chrissummerfield9583 4 года назад

Wicked I am so going to melt down my 50 gr pamp.🤩

@vogman 4 года назад

Have fun!

@aaronbassett6803 5 лет назад

That is cool ill show you mine when i have done them

@vogman 5 лет назад

Please do Aaron. I love getting emails and pictures from fellow casters : )

@HeimoVN 5 лет назад

Your really tempting me to get my foundry up and running again :P

@vogman 5 лет назад

Come on Heimo, you know you want to : )

@HeimoVN 5 лет назад

@@vogman I really do, time has been the only constrain lol

@vogman 5 лет назад

Time... the enemy of the creative process : )

@TheLopper 4 года назад

So if i sent you a lost wax mold and some rose gold, would you be able to cast an engagement ring that ive been planning? I dont have a vacuum chamber and dont have the money for a pump, but casting is the way to go for this project

@NIGHTMARE-zy7tq 5 лет назад

Love it keep up the good work sir.

@vogman 5 лет назад

Thanks very much : )

@AwesomeusPrime Год назад

Was this using a vacuum or just gravity for the metal pour?

@vogman Год назад

I use vacuum 😁

@WarlordSh4Dow 5 лет назад

Results look pretty great to me. Nice job on this one! Makes me want to get into this hobby even more to cast some nice signet rings from my D&D friends!

@vogman 5 лет назад

That's the fabulous thing about casting. You can make a special bracket to mount an engine part, a trophy for a tournament, rings for members, etc, etc. If you can think it and print it, you can cast it : )

@vukomanvitez4915 5 лет назад

Great work

@vogman 5 лет назад

Many thanks : )

@jarlove 5 лет назад

have you considered trying "vapor smoothing"?

@vogman 5 лет назад

A few people have been suggesting it. I'll have to give it a try : )

@askquestionstrythings 5 лет назад

acetone Vapor smoothing is something you do with ABS. PLA doesn't smooth with acetone vapor.

@gregarmstrong4653 5 лет назад

@@vogman hit it with a bit of spray on furniture wax and give it a light polish, it will at least fill in the grooves a bit

@GeordieT 5 лет назад

@@vogman Doesn't work at all. Anyone need 5lts of acetone? :o/

@joshuamoore24_7 Год назад

I think coins and bars could be made with this method easier also.

@benhael3624 2 года назад

How much would you charge me to do a lost wax cast of a small trinket if i was to send it to you made out of the wax product of your choice? It would not need to be perfect. In fact some air bubles and imperfections would be what I would prefer.

@ronyerke5339 5 лет назад

Nice rings. 👍 How long have you been going by VOG?

@vogman 5 лет назад

Ron... I thought it would be you... if you'd been just a few minutes earlier you'd have beaten Tobho's comment on exactly that point. I was about to pin it to the top in case anyone was wondering. But thanks for noticing : )

@RoninofFortune 5 месяцев назад

SO inspiring!!!! Totally giving you a sub!!!

@vogman 5 месяцев назад

Thanks for subbing! You'll find a lot of casting on this channel, so if you have any questions, feel free to ask 😁

@user-me7iw6ft8z Год назад

What do you use for printing it?

@cheruscanstrong7520 3 года назад

What size flask are you using?

@atumautomation4095 4 года назад

great video, thanks for sharing, do you offer 1 on 1 tutorial ?

@adelphiuniversaltv3351 4 года назад

What is the tumbler called? I'm looking to purchase one for my jewellery

@WariorrOfGame 2 года назад

This is nordic gold?

@Paranamic 4 года назад

Where do you get these wax sticks you use? Cant find them anywhere and dont know how to make them myself.

@cpayne1757 4 года назад

So, just curious - have you tried casting brass? We're there any difficulties...?

@vogman 4 года назад

I have cast in brass (example - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-tXJ_MuffQd0.html) and it's a nice metal, but the toxic fumes put me off.

@dionwairepo5716 4 года назад

After cooking the plaster with the wax in it, does the wax melt away after pouring it?

@vogman 4 года назад

Most of the wax drips out and what remains burns away to nothing, leaving a void ready to receive the molten metal.

@dionwairepo5716 4 года назад

@@vogman thank you. I have been doing research on making a ring for myself, it represents suicide awareness.

@johnd1774 4 года назад

Should not have put pla and wax in one flask as burnout temp differ and rate of melting of wax differs you would probably have had better results to seperate them

@stevedaniel9909 2 года назад

Any specific type of casting plaster?

@vogman 2 года назад

These are becoming much more accessible and diverse, which is great. You'll find powders dedicated to wax and even to resin these days. Whether there's a real difference is debateable 😁

@aleksandardimitrov7989 3 года назад

Good evening caould you make a ring from iron and brass for me ?

@jamesway5036 5 лет назад

Nicely done. Are you able to take pictures or something and put it on your computer then 3D print it? Then you could have made extras if something had gone wrong. I do not know much about 3D printing and would like more information. Thank you. Great job 🍻

@vogman 5 лет назад

I'll be honest James, I'm still learning 3D printing myself. I got my Creality CR10S in January this year, and I'm very pleased with it. It's one of those things you can watch 1000 videos on, but never really grasp until you buy one and get on with it. If you do, after a week of swearing and cursing me, you'll get there. A week later, you'll see why people love them. 3D scanners are a thing, but they're a little pricey I believe. I think we'll see those becoming more and more common very soon.

@michimatsch5862 5 лет назад

@@vogman i have gotten through the first week and my printer stopped working because pla went into the screws. So I guess one more week of cursing you? Ps: The printing was great after two days. I just have a questionable sense of humor.

@vogman 5 лет назад

It's a rare day when someone, somewhere, isn't cursing me ; ) I'm impressed with a couple of days. I had bed-sticking issues until I discovered some wonderful tape. SOOOOOOO much swearing before that : )

@jamesway5036 5 лет назад

I know I have said it a few times that I am building a pile of meltables, but I am. I plan on building a couple different sized foundries and melt my piles for ingots and stuff. I travel a lot so I find aluminum a lot. 300 pounds at a guess with 20 pounds of copper and 5 of brass. Most is outside. I just don't have a workshop yet. Next couple of months and I will have one 😃 Then the work and fun will begin along with a RU-vid channel too boot. My fiancé does crafts and I will help make items for that. Till then, my piles are building and I am gaining knowledge. To the future 🍻🍻🍻

@vogman 5 лет назад

That's excellent. Share the learning experiences : )

@aryanprivilege9651 4 года назад

The totenkopf with runes is cool, carved with special tools? I’d buy a werewolf or one of these, 3D printer needs directions not a photograph, this seems like based hobby, good for him. Beats having to spend money if made it yourself for fun. Dog tags from Otto Skorzeny or copy of rare limited production. Wouldn’t gas burner be cheaper, than that kiln thing? Like use to burn glass or set fire 🔥 to sugar cane, genuinely don’t know. I’d make one for a item or too, but sure,the could do it. Special wax, soda, wow completely a knob.

@Sebastian-lu8en 3 года назад

Hello, im have a question, the aluminium bronze is toxic in rings for the aluminium??

@vogman 3 года назад

I'm going to be honest and say I don't know. There's lots of theories about metals being toxic and I don't think there's a definitive answer yet. My guess, as long as it's occasional, it should be fine.

@Sebastian-lu8en 3 года назад

@@vogman ohh, It's sad I wanted to make an aluminum bronze ring to wear every day 😢

@polaroidpossession5207 2 года назад

Hello there, lovely video, I’m just wondering do you take wax ring designs for pouring as a business? Or if not do you know of anyone that does? Thank you x

@vogman 2 года назад

Actually I will be covering this very topic in a video is a few weeks. Keep an eye out for me Zombie ring and I'll be advising those without casting equipment how to get cast 😁😁😁

@5urg3x 3 года назад

How is mass produced jewelry made like earrings and body piercing jewelry?

@vogman 3 года назад

A lot of cheaper jewellery is stamped / pressed into existence, the same way coins are made.

@5urg3x 3 года назад

@@vogman Thanks I’ll have to look into what that process is like and how they are able to achieve such high precision.

@glennmoreland6457 5 лет назад

Good...👍

@vogman 5 лет назад

Thanks Glenn : )

@fourtwo7612 5 лет назад

Don’t quite understand your furnace situation- you seem to have lots! Why have you stopped using the homemade one?

@vogman 5 лет назад

I guess the answer to that Tim is 'which homemade one?' There's been a couple. For Lost PLA / Wax I need two heat sources, one to melt / burnout / prepare the plaster flask (for which I use my homemade electric furnace) and one to melt metal (for which I use a tabletop, store bought electric furnace - though I've also got a couple of gas furnaces I use from time to time). The choice is purely preference... electricity is quiet, clean and indoors. Gas is noisy and outdoors. But for more on the why, have a look at this video I made on Lost PLA. It should tell you everything you need to know : ) ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-qxj5eUkAFUI.html

@fourtwo7612 5 лет назад

Glad to hear you are still using the homemade electric, it is on my (rather extensive) todo list, so pleased to hear it is still in favour 😊

@vogman 5 лет назад

It's still my favourite furnace : ) Have you seen last week's video? I added a programmable PID to extend the use of that furnace, giving it Burnout capabilities - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-hGCL1FXKXss.html

@green_0001 3 года назад

Love❤️

@vogman 3 года назад

😁

@aaronhill8286 3 года назад

Hey there! Which 3D printer do you use? Also, can the used “lost wax” be reused in the printer?

@gratefulcrown4846 3 года назад

Hi, I can’t answer about the printer but as someone looking at getting into casting, no you cannot reuse the lost wax as to clear it from the mould you actually burn it away to ash

@MartynHutchby 5 лет назад

What do you do with the "burnt out" plan / wax, or does it just "vanish"?

@vogman 5 лет назад

The PLA and Wax mainly drip out of the plaster onto the oven floor where they mostly evaporate, but some fine ash gathers after a few casts. But the plaster... you're stuck with that mess : )

@patjohn775 4 года назад

The pla cooked out?

@vogman 4 года назад

Exactly : )

@yousifalidani1842 4 года назад

Quick question is the plaster still inside the ring or di the heat melt it down im confused, so is it just like dipped

@vogman 4 года назад

The PLA and Wax both stay inside the plaster until it is heated to a very high temperature. These then melt away to leave holes in the plaster. Molten metal then fills up these holes and once cool the plaster get removed. Then you're left with the rings 😊

@yousifalidani1842 4 года назад

@@vogman ohh thanks alot

@EsperiaCreations 5 лет назад

Awesome ! I really want to do that for some of my jewellery projects. What kind of oven did you use ?

@vogman 5 лет назад

Thanks. I made my own electric foundry which now tends to be used as a burnout oven. This was much cheaper than buying one. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-XypmI38IKAw.html

@EsperiaCreations 5 лет назад

@@vogman Thank you !!

@TheAussieRepairGuy 4 года назад

How do you dry your plaster molds?

@vogman 4 года назад

You don't really. They're damp when they go into the burnout oven and from there they get the drying of their lives : )

@TheAussieRepairGuy 4 года назад

@@vogman I was wondering about that - two birds with one stone. I like that idea.

@RR-ce9tu 4 года назад

Where can i learn how to do this

@vogman 4 года назад

I'm self taught in honesty, but I've got videos covering the whole of my journey. But if I'm too dull for you, you might find local jewellery making classes : )

@jamileholmes3650 4 года назад

What did you use to sand and remove the sprue.

@vogman 4 года назад

I can't be sure offhand Jamile. I typically use an angle grinder, a Dremel (with cutting disk or sanding drum), small files and ordinary sand paper : )

@jamileholmes3650 4 года назад

That still helps thanks alot working on a few projects myself you earned a new sub

@vogman 4 года назад

That's great to hear. Drop me a line any time if you need a little help : )

@luiscastaneda5481 4 года назад

Is the base you use available on thingverse?

@vogman 4 года назад

Hi Luis. Yes my casting tree is on Thingiverse. Just search for VegOilGuy and it should come up : )

@Jsellers1965 5 лет назад

That turned out Awesome. You should see some of the rings I have made in silver. I made an awesome .9999 Crucifix for my friend in Canada, Lionel deGrand Pre. Look him up he shows them off all the time on youtube. I also have a few videos(Nothing as impressive as yours) on my youtube Channel. Keep up the good work My Man!

@vogman 5 лет назад

Thanks John. I've only had a quick scan - and 2000 sub is nothing to be sniffed at, well done. I always think getting the first 1000 is the real trial. But if it's something you enjoy doing, then subs don't come into it - they will find you. If YOU are happy in what you do, THEY will be as well. Maybe that's why I haven't got 2 million subs, but I'm happy doing my thing and chatting with folk : )

@michimatsch5862 5 лет назад

@@vogman I know this is kinda selfish but I like this kind of content more. Feels more personal plus you can actually interact with people. Speaking of which - why do you give everyone a heart?

@vogman 5 лет назад

Not everyone... but nearly everyone, yes. Why? Why not? As you say, this interaction with like-minded people is great. Even criticism is appreciated, as long as it's genuine and not just intended to be hurtful nonsense. I don't know everything, so if someone points out a mistake, I learn. And, to be a bit corny, I do love getting comments, questions and feedback. So hearts.

@captainjerk 5 лет назад

@@vogman John Sellers is a great fella. Good friend, I've been trading with him for years! :D

@vogman 5 лет назад

Any friend of yours Cap, is someone I have to keep a close eye on ; ) Nah, just kidding. John's always been very supportive with his comments, much like yourself. You're both on my Christmas Card list... if only I owned some Christmas Cards : D

@askquestionstrythings 5 лет назад

Welcome to the jewelry casting addiction.

@vogman 5 лет назад

It's certainly got its attractions : )

@ThatDonkus 5 лет назад

How can we go about getting you stuff to cast.

@vogman 5 лет назад

I'm always looking for ideas and do welcome suggestions. Anyone can contact me privately through my website here - www.vegoilguy.co.uk/index.php I cannot guarantee I'll do it. It has to appeal to me. I need to enjoy doing it otherwise it becomes work, and that's not what I want for my videos. So if it's an idea that I like, I may well give it a go. Feel free to send me ideas anytime... but please don't be offended if I say no. I'm limited on time and resources so I have to really want to do what I do : )