My cbr 250r is not getting started . If gets started it is acting like its not getting fuel and stopping.. What might be the problem? Waiting for ur answer
Hey bro, due to stupidity of service centre mechanic heat shield flap which is place below fuel tank is not properly place due to spark plug cap wire can you please tell me in cbr250r spark plug wire goes from 1) cross(+)cut in shield or 2) circular hole in shield
I know exactly what you are asking The long rubber spark plug cap goes through the Cross cut + Good that you decided to sort it out yourself . For service centers your bike is one among thousand but for you it's the only one. avoid service centers for basic services
Keep it up. U have shown the dismantling process quite honestly. Brother advice me my cbr is 9000klms 6yrs old should i clean up the fuel filter and when and whether should i replace or clean the spark plug. One more thing just yesterday my abs brakes upon pressing hard, are making a kat kat sound for that when i removed the abs fuse the brakes are not making that sound. I noticed that 2 small Phillips bolts for down from the bike somewhere where the abs module is. Pls advice
It's better if you change it at ever oil change interval of 6000kms for fully synthetic oil if not atleast change it every 2nd oil change i.e at 12000km
It also depends on your riding style, change oil filter at every oil change if you ride agressively by using clutch frequently and churning gears For normal daily commuting with lower rev range you can push it and change at every 2nd oil change
@@GAMINGBIKERBAZRAW Whaaaaaaaaaaaaaaaaaat! I have done 89000 and havent touched it yet. In the owners manual it says it's good for 50000kms. I recently bought one, I will change it immediately
We should catch up bro, I keep visiting Mysuru on most of my rides , share me your contact information, will surely meet up, all your videos on CBR 250R is very helpful 👍👌🙏
Place a cotton cloth in between the bolt head and key and try, if it doesn't work use a sheet of paper and fold as per requirement and try Idea is to make firm grip between alan key and bolt head