Тёмный

Cells, lacing, and waves in Resin - what you may doing wrong - tips and tricks 

Resin As You Wish
Подписаться 44 тыс.
Просмотров 78 тыс.
50% 1

Hope this helps! thanks for watching.
If you found this video informative and would like to buy me a coffee or leave a tip (cheers!): www.paypal.me/resinasyouwish
I am an Amazon associate, I receive commissions from the qualifying links to amazon listed below:
Liquitex Prussian Blue: amzn.to/2ZwWPWq
WHITE (mixture of Castin’ craft with a couple drops of the alcohol ink):
Castin Craft white: amzn.to/3e0MYfB
Alcohol ink white: amzn.to/38ttAGZ
Typical Tools I use:
Hair Dryer (the brush tip is removable): amzn.to/3bp2kfh
Sizzix Accessory - Die pick: amzn.to/38SSgL8
Dental pic: amzn.to/2Gcj4tG
Dot tools: amzn.to/3s5JFMq
Paint spatula: amzn.to/3i88xNA Dental pic: amzn.to/2Gcj4tG
Torch: amzn.to/39suJiH
Heat Guns:
1. AmTake: www.amazon.com/Variable-Tempe...
2. Heat gun - I have a red version of this one: amzn.to/2WXGrwq
3. Heat gun - Green version: amzn.to/3woY6NK
Heat gun tips and nozzles:
Here is a link for just heat gun tips if you already have the gun but don't have the end pieces: amzn.to/2GPn3wC
Dremel 3000: amzn.to/3o4POra
Dremel bits Stone Bit: amzn.to/2NSyAvk
120 Sand Paper Grit Dremel bit: amzn.to/2BHns1Z
Tape: this tape is called “drape tape” amzn.to/2BxlFfY
Pink Respiratory Mask: amzn.to/3CLL7bP
Safety Glasses: amzn.to/3ERLamW
Safety Recommended: Carefully read your product labels and warnings, make healthy choices based on your research and craft safely!
Signature pens:
Gelly Roll Pens - Stardust set
Gelly Roll Pen silver: amzn.to/3i52yJV
Gelly Roll Multi pack: amzn.to/2F0M73a
I used MiraKleer Resin on this project, here are the typical resins I use:
KS Resin: amzn.to/3iyjc5h
Pro-Marine: amzn.to/2Z1n2wd
The Epoxy resin Store: amzn.to/2BE1NHY
MiraKleer Table Top: amzn.to/2Zl9ziR
My Shop:
www.etsy.com/shop/ResinAsYouW...
Pinterest: To see more of my designs and videos (Check it out)
pin.it/7qlAsgu and the kitties board is: pin.it/6t0LwmV

Хобби

Опубликовано:

 

6 авг 2020

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 220   
@ResinAsYouWish
@ResinAsYouWish 4 года назад
17:14 close ups
@livingink-fantasyworld746
@livingink-fantasyworld746 3 года назад
Hey! How do you give finishing touch up to resin work?
@ATAsgard1
@ATAsgard1 2 года назад
@@livingink-fantasyworld746 Are the 2 white pigments MIXED with resin, or do you just apply them straight to the existing resin?
@fairyspunfibers9098
@fairyspunfibers9098 2 года назад
@Thor Yes! The whites must be mixed with resin, first!
@susanpickup9497
@susanpickup9497 4 года назад
Please do more vids where you explain your thinking. Cat chat is fine! I love to hear people describing their thought process. I find any videos with music are off putting as I rarely enjoy the music! So please talk away! 👍🤪
@shannonlamb1284
@shannonlamb1284 3 года назад
I LOVE that you show us your mistakes and let us learn with you. MOST helpful video I've watched so far (and I've watched a lot of em)
@green1day2dork1234
@green1day2dork1234 2 года назад
Thank you so very much for this video! I have been trying over and over to get this effect right, adding silicon or alcohol, and none of it comes out like this, This is exactly the type of video I was looking for, I'm very grateful you took the time to explain this to us beginners!
@mfi6842
@mfi6842 4 года назад
Great tip! Thank you for sharing, l really love all of your tutorials ❤️
@TheSkyhazFallen
@TheSkyhazFallen 3 года назад
You should be honored with ballons and a parade! I have watched video after video trying to understand what i was doing wrong. Thankyou so much for a clear upfront explanation.
@Pylirr_Raerana
@Pylirr_Raerana 3 года назад
Amazing discovery! Thank you so much for making this video! It helps a lot😊
@soniavazquez5434
@soniavazquez5434 3 года назад
Fascinated w u style and ideas ! Awesome !thanks for sharing🙏🙏🙏❤️
@angelawelsh3802
@angelawelsh3802 2 года назад
Thank you so much for the info. Yours is the first video to show the actual technique rather than just showing off your talent. Thank you for talking about things like resin thickness which turns out to be a major factor in how the piece reacts tp ink and turns out. Now if someone would just let the public know that YOU HAVE TO LET THE RESIN SIT to acquire the thickness needed to control the pour, we will all be grateful. But you are AWESOME. Love your tutorials.
@irmadavila8841
@irmadavila8841 3 года назад
I just found your channel and I’m so excited to learn about creating cells with resin. Thanks for sharing!
@christinemclellan5835
@christinemclellan5835 2 года назад
Amazingly informative video! Thank you for sharing your beautiful creations & "learnable ones".
@natak7847
@natak7847 3 года назад
Probably the most informative video on wave cells out of dozens! Thank you so much for it!
@reneedrybread1390
@reneedrybread1390 3 года назад
Thank you so much, your tips were super helpful !! Love your kitty too!!
@pamfitzgerald8378
@pamfitzgerald8378 4 года назад
So informative! Thank you so much for doing this video
@jamiepandagirl7561
@jamiepandagirl7561 3 года назад
Thank you so much for the detailed video. And for the links to what to buy that was a huge help!!!
@barbarayoung4677
@barbarayoung4677 3 года назад
Loved this video! Going to try your suggestions today. Also subscribing to your channel. Thanks so much! 👍🏽
@buddhababedesigns4028
@buddhababedesigns4028 3 года назад
Happy to hear the cat! Love the way each one turned out, Thanks for sharing!
@bibbanengstrom4046
@bibbanengstrom4046 3 года назад
Great video - thanks a lot. Will look at all your videos now!
@farnazamjadi477
@farnazamjadi477 4 года назад
Thank you very much to share your experiences 🙏🏻🙏🏻🌺💝 you are a creative artist 👌🏻👌🏻👌🏻
@neo3498
@neo3498 3 года назад
I love informational videos like this! I got into Resin making a few months ago. Thank you SO MUCH for sharing with all of us!
@tracyblakeley2709
@tracyblakeley2709 Год назад
Great video and information on the waves with resin helped me understand 😊😊
@donnadoss9405
@donnadoss9405 Год назад
I am learning a lot watching your videos thank you so much for your videos
@deannaweimann9196
@deannaweimann9196 3 года назад
Awesome. Best cell video for waves👍explaining details everyone else leaves out
@saragriffiths1335
@saragriffiths1335 2 месяца назад
Love this channel! Thankyou for making these videos.
@lisat1825
@lisat1825 3 года назад
I love the way you’ve explained this!!! I’m new to resin crafting and am having such a hard time creating the cells but I’m so excited to implement your techniques!! Thanks!! I’m now a new subscriber to you!!
@oneluckygirlandherdog
@oneluckygirlandherdog 2 года назад
I just found your channel and I'm hooked, You really do a great job!!
@annagray6491
@annagray6491 4 года назад
Thank you for sharing this. It is very informative especially as a newly. My cats have Bengal in them and are also chatty! Piglet was chatting back!!
@thecreativereel
@thecreativereel 2 года назад
Rightly said...no one explains it the way you have! You create amazing artwork 🙂
@kerrydoyle1025
@kerrydoyle1025 3 года назад
Enjoyed watching your video thanks for the great tips.
@rendaowe
@rendaowe 2 года назад
Your cat just wants your attention. 😉👍🏼
@Dodo_hanna
@Dodo_hanna 3 года назад
I’m really amazed of your video. I watched every single moment of it. Trust me I scroll up most of the videos i seen. I enjoyed every second of it. Thank you so much . Definitely I’m gonna subscribe you and follow all your videos . Many blesses mwah ❤️🙏🏻😘
@Studio57production
@Studio57production 2 года назад
that cat got my attention. i was looking around my room at first!! thank you for your video. very informative and to the point. will be using some of the techniques you showed.
@leennatsheh4821
@leennatsheh4821 3 года назад
Love the way ur explaining the waves, I watched a lot of resin videos and as u said no one really tells you the small details that makes it really pop thank u🥰🥰🥰
@cecilabryant6466
@cecilabryant6466 Год назад
Thank you for taking the time to explain your methods and why you do them. It makes more sense to me now. I am still new to resin.
@qtkittenz352
@qtkittenz352 3 года назад
Thanks for the tips. I was wondering why mine weren’t working. Makes a lot more sense now.
@janicewalters9665
@janicewalters9665 2 года назад
Thanks for this explanation and it sure makes more sense.
@julialucas1597
@julialucas1597 3 года назад
I'm very new to resin and I have just learnt alot from this video. Infact I learn lots from all of your videos! There is so much I want to try out now. The real 'aha' moment was realising that I have been pouring my resin to thick. Please don't stop making these videos!
@valh6203
@valh6203 2 года назад
Thank you very much, this is exactly what I needed to learn! 🙏🙏🙏
@Toko_G
@Toko_G 3 года назад
Thank you soooo much from Japan 🇯🇵
@hotsteelersfan
@hotsteelersfan 3 года назад
Thanks for sharing and I love your Production Assistant❤️
@ResinAsYouWish
@ResinAsYouWish 3 года назад
Lol! He’s quite handsome too
@mookzmom
@mookzmom 4 года назад
Very helpful! Many thanks for this. Also, I love your kitty!
@ResinAsYouWish
@ResinAsYouWish 4 года назад
He thinks his name is handsome
@kerria756
@kerria756 3 года назад
My kitty's a chatty Cathy too, He looks alot like yours, my spoiled baby 🐱. Cant wait to try your tips Thank you! 😁
@briansalazar7397
@briansalazar7397 3 года назад
Amazing effects 🙌
@reneedrybread1390
@reneedrybread1390 3 года назад
Thank you so much, I am failing consistently on making waves. I have watched many videos and still have not got it down. Your tips were helpful and I will keep trying!!
@lizmoore852
@lizmoore852 3 года назад
I love Bengals! Used to take care of several of them, even had some stay in my home for socialization. They’re SO sweet, very talkative, just, unlike any other breed!
@CarolineHallett
@CarolineHallett 3 года назад
We have a bengal and I knew it you had one before you showed the picture! Great tutorial learnt loads thank you
@ResinAsYouWish
@ResinAsYouWish 3 года назад
Lol! Cheddar has a cameo in the best gold for resin video I marked it in the chapters lol 😂
@theresathomson787
@theresathomson787 4 года назад
Wow, that was super helpful. Thank you💙
@aliakhatoon7724
@aliakhatoon7724 2 года назад
Lots of thanks for this video.... It really points out the difference how the outcome changes with a little more resin!!! I was always wondering where I was going wrong... please make a similar kind of video about the blooming techniques in resin....i am still struggling a lot with that.... love your work 💞
@pamelaneibuhr6959
@pamelaneibuhr6959 4 года назад
Makes a huge difference in color as well
@mariannescarfe6836
@mariannescarfe6836 4 года назад
I’ve done a few seascapes now and had success and hadn’t occurred to me the depth of the resin effects it! I’ve only done it on boards so probably why they worked well!!
@YoshKurai
@YoshKurai Год назад
Thank you for explaining the depths and differences! Like you said, it's completely overlooked in most of the other tutorials out there and the first time I tried to do the beach waves (literally the first resin project I did) they didn't come out quite how they were supposed to. They still look decent though. Thanks again!
@jeniowens4251
@jeniowens4251 11 месяцев назад
Great info! I feel like I can finally get it! ❤
@jayeagle2435
@jayeagle2435 3 года назад
Great vid, learned so much ♡♡♡
@janlillis3676
@janlillis3676 2 года назад
Thank you so much I was wondering how come one time I can do it and the next time I can’t I had no idea it had to do with the thickness of my resin so thank you thank you thank you what a wonderful tutorial.
@marieclairemaribbay3992
@marieclairemaribbay3992 2 года назад
Thank God I found this video! I already wasted a liter of Resin figuring out how can I get those cells! And you have exactly mentioned my struggles, with my ink going down. I'll try your advise and hopefully I will get this wave and cells right! 🙏
@artandcreationsbyyvettecre2308
@artandcreationsbyyvettecre2308 3 года назад
Thank you I learnt so much and appreciate you sharing.
@kittyclaws2972
@kittyclaws2972 Год назад
Wow ... Thank you SO MUCH! I can already tell you have just saved me SO much frustration and botched projects 😅🙌 definitely not something I would have though about/considered being a culprit
@videomry
@videomry 2 года назад
Answers my question!! I am doing my first deep pour project and was struggling to create a lacing effect. Tried finding an answer on RU-vid but did not find anything specific. Thanks for sharing your experience!
@stacycurtin
@stacycurtin 3 года назад
Thank you so much for sharing!! I have been wondering what the heck I was doing wrong! 🤪
@revalovett8560
@revalovett8560 2 года назад
Thank you so very much for sharing this!
@soulenergyartsartistmariam8086
@soulenergyartsartistmariam8086 3 года назад
Awsome tutorial!!!
@debrajol3585
@debrajol3585 3 года назад
Girlfriend I put your channel on while I’m doing my artsy things and let your videos run.. I hope you get to the monetizing ASAP because you definitely have the resin art mojo!!! 💯💯💯. And 😻that kitty Cheddar too 😹😹😹
@casey6223
@casey6223 2 года назад
I've finally figured this one out after many flubs. I wish I had seen this video months ago!
@MsCountrykitty001
@MsCountrykitty001 4 года назад
Very informative. Thank you!
@katharinabless
@katharinabless Месяц назад
Thank you, this is very helpful!
@marykrafts4607
@marykrafts4607 3 года назад
Thanks good info and you can stop the over flow by wiping off the underside drips the dripping keeps pulling your resin off does the same with paint.
@missygold9315
@missygold9315 3 года назад
Thanks I been trying to figure out a fool proof way to get cells and lacing and I have both things you showed
@adbcards
@adbcards 2 года назад
THANK YOU THANK YOU THANK YOU!!! Because of you I found out I am using Entirely too much resin, and you are right, nobody mentions that! I cannot wait to try again and hopefully get a defined wave, well mine just kept sinking and turning into clouds. So
@YazLaGitanaPr
@YazLaGitanaPr 3 года назад
Thanks, I paid for an online class last summer, and I never get the mixing with the alcohol ink or these techniques, so I assume that I was doing something wrong, paid for expensive whites and resin, and finally give up. Thanks so much to share means a lot
@tanjasart
@tanjasart 3 года назад
Thank you for the video! I love your colour blue! En the wave techniek!
@GaryMcKinnonUFO
@GaryMcKinnonUFO 4 месяца назад
Thanks very much for this, really informative and helpful. I've had a few tries with cells and lacing using floetrol, silicone oil and acrylic paint in the resin but with no results, so today i'll be in the shed trying this out. Our 2 cats are talkative too, i think people that talk to their cats from kittenhood end up with more talkative cats. Liked and subbed :)
@deadeyeddolly
@deadeyeddolly 3 года назад
Brilliant video explanation for waves and cells. Also my cat Ziggy woke from his deep slumber on hearing your cat lol 😺😻
@ResinAsYouWish
@ResinAsYouWish 3 года назад
Lol! Cheddar is even louder in the dragonfly coaster video lol ! If I play the video with Cheddar in the room he sits on the tv stand and admires himself
@jillclay936
@jillclay936 3 года назад
THANK YOU!!! conundrum sorted
@rakhiyadav7779
@rakhiyadav7779 Год назад
Thank you so so much I have tried the waves with only opaque white but the waves did not come like the way they should. But now I am going to try with alcohol ink thank you once again.
@kathymceachern2437
@kathymceachern2437 3 года назад
I seriously learned what mistakes I made. Ty
@healingart232
@healingart232 3 года назад
Thanks for this video 💜
@oliviarinaldi5963
@oliviarinaldi5963 3 года назад
This was actually quite helpful. Cheddar was extremely helpful with his tips as well. This is my first video watching you and it appears by your words that you normally don't speak. I think you should. Cheddar is an amazing cohost! Of course, i am not at all biased! I am a lover of all animals ;) , a new sub and an Amazon customer ;) lol.
@ResinAsYouWish
@ResinAsYouWish 3 года назад
I do speak on my tips and tricks videos and am slowly getting better at integrating my voice in, I wasn’t speaking so much before due to throat surgery and basically just figuring out how to record these so they don’t confuse everyone lol- cheddar appears in a few of my videos lol - the dragonfly, the best gold for resin and he is quite a talker and love bug. I could talk about him all day
@szilviakiss5954
@szilviakiss5954 3 года назад
Wow this video is super helpful! Thank you so much 😊 definitely no other will mention how thickness can be “responsible “ for designs disappear:(( plus not necessarily to waste all that expensive resin ! Thank you again 🙌🏻
@moonlit.sunflower
@moonlit.sunflower 3 года назад
Agreed! You’ve taught me the most during my new journey with resin! Love Cheddar too! 💕
@angelawelsh3802
@angelawelsh3802 2 года назад
Exactly. I wasted so much resin/$$$ not knowing re. thickness.
@ladyhill9744
@ladyhill9744 3 года назад
Thank you for this
@rendaowe
@rendaowe 2 года назад
Thank you very much for your help, I appreciate it it so much! I was loosing my mind. LOL
@mariangelescayola2797
@mariangelescayola2797 4 года назад
Excelente!!! Thank you!!!
@texturenshimmer8339
@texturenshimmer8339 2 года назад
Thank you!
@nandavanhouten5831
@nandavanhouten5831 10 месяцев назад
Thanks!
@billrobinson8939
@billrobinson8939 11 месяцев назад
Great tips. Thanks. My 2. CAT'S are almost non vocal.
@cathydeecher7034
@cathydeecher7034 3 года назад
love your video, could you show us how to do have on a ceramic tile, having trouble torching the white, thank you
@louannhepworth6376
@louannhepworth6376 Год назад
Hello I love watching you work! I am very glad that you explained the thickness of the resin! Nobody else has ever explained that. I have a question for you. When you put your weight on to do a wave, do you let your white thicken up before you put it on?
@brianpingel738
@brianpingel738 8 месяцев назад
You are the best. Thanks for explaining the waves and cells to us. The waves are kicking my butt too😂❤-- Keep on teaching us🫶
@GoodDealsBadDeals
@GoodDealsBadDeals 3 года назад
Thank you so much. This really helped. I'm making 12 serving tray centerpieces and just can't get the cells.
@dicaanimal2187
@dicaanimal2187 3 года назад
I love The blue effects either
@nunawatson4307
@nunawatson4307 3 года назад
Looooove this
@lolalove3972
@lolalove3972 9 месяцев назад
Thanks 🙏🏼
@debbiebachman7216
@debbiebachman7216 4 года назад
Love all your videos! Would love if you talked through making a galaxy coaster.
@ResinAsYouWish
@ResinAsYouWish 4 года назад
angel 612 I can work on one, are you thinking the multi colored galaxy with pink, orange, gold, aqua, blue and purple- or the spiral galaxy?
@debbiebachman7216
@debbiebachman7216 4 года назад
Resin As You Wish I think I’ve watched every one you’ve done and I love them all!
@breereal7324
@breereal7324 4 года назад
Resin As You Wish I’d enjoy a spiral galaxy video. I haven’t seen that technique on here.
@debrajol3585
@debrajol3585 4 года назад
Resin As You Wish I understood the Spiral Galaxy. It’s the multi layered, multiple colors with the micro beads I’d love a talk-thru on 💖💯💯💯🤩🤩🤩
@leeforster8145
@leeforster8145 2 года назад
Omg your video had me looking around for our Bengal until I realised it's your one in the video lol
@ResinAsYouWish
@ResinAsYouWish 2 года назад
he is loud and proud -such a sweet guy to have around
@caronstone4226
@caronstone4226 4 года назад
Christy so lovely to hear your voice... oh and cheddar man too. Love your Pinterest with your cats they really are pretty . Great video your really thoughtful and a great teacher It was really great to know how thickness will effect the spread and “spring back” of the swirl I tend to make my resin thin like you since I learned mostly from you 😉 lol I do the layers so like it thin however I can answer a couple of your questions.... or uncertainties you mentioned in video.... yes casting craft alone will create cells and lacing so the alcohol ink isn’t completely necessary but doesn’t hurt. I giggled at the reuse of your so called mess up which I thought was brilliant probably could have gone over the top instead of back since it was opaque blue but saw that foil pen when you showed the ” mess up” side. So would love to see more ones with glass and moonstones in with combo of opaque and transparent colors.. how do you make the bottom layers show through do you use opaque first then each layer use more transparent colors or do you use silicone oils to make the open up? Also did you know you can make any color crushed glass by putting some clear glass into a cup add alcohol ink of your choosing stir around till all covered then spread them on a paper towel in a single layer and let dry overnight and you now have crushed glass in any color! You probably already knew that 😂😘
@ResinAsYouWish
@ResinAsYouWish 4 года назад
I use transparent layers, but I lighten the color as the layers rise - so dark, then lighter, then usually the top layer is clear so you can see down into it. I"ll use the glass and moonstones again, I have a couple ideas I want to try and couple things I have done, but didn't video and will do again. I ALMOST showed you my spiral galaxy blob coasters in this vid, but forgot LOL
@caronstone4226
@caronstone4226 4 года назад
Resin As You Wish Thanks for your reply! Let me ask you though when you made the blue ones with video you used mostly opaque right? But the end result was beautiful but I tried and basically covered the stones and couldn’t really see down 😩
@ResinAsYouWish
@ResinAsYouWish 4 года назад
@@caronstone4226 all layers are a mix of transparent and opaque - I specifically put clear on the stones so they dont get hidden and on lower layers, i dont completely fill the coaster just fill in some areas as the layers build it up. You can also go in once the resin is thicker (like peanut butter) move it away from any areas that it sunk into that you want to see
@caronstone4226
@caronstone4226 4 года назад
Resin As You Wish 💋🥰😍 thanks
@debrajol3585
@debrajol3585 4 года назад
just jumping in here, hi 👋 when I make the crushed glass in different colors I don’t even spread them out to dry. The alcohols evaporate 👌. I make them in the cups they’ll be stored in and stir them up a few times during that same day..close the lids and done. I was spreading them out but one time I got busy for several hours and when I came back later they were pretty much dry. Now I’ve fine tuned it 😂 (lazy way) Just a few stirs does it! 🥂✌️✌️✌️
@sunakonakahara222
@sunakonakahara222 2 года назад
We appreciate the chatty cat!
@barbking2708
@barbking2708 3 года назад
Great tips thanx! I have feline studio assistants as well😻
@mlw1700
@mlw1700 2 года назад
Thank you for this video. It's very detailed and explains a lot. I'm fairly new to resin pouring and still trying to figure out how to get the effects I want. My question is ... At around 9:20, you used one of your resin coasters to demonstrate one of the white effects. On the back side you showed what happens when you stir the white too much, no cells. Underneath the white there was a little stripe of another pigment that had a gorgeous color shift. Do you recall the name of that pigment or what it is? I love it. Thanks again.
@cathydeecher7034
@cathydeecher7034 3 года назад
love your videos, can you advise what mold you used
@cornwasher
@cornwasher Год назад
Excellent tutorial. Have you used mica powder instead of alcohol as a coloring agent and conducted similar testing?
@richardabbott5601
@richardabbott5601 3 года назад
Hopefully this will help me
Далее
▼КОРОЛЬ СОЖРАЛ ВСЕХ 👑🍗
29:48
Просмотров 412 тыс.
would you eat this? #shorts
00:23
Просмотров 798 тыс.
Never EVER Do This With Resin It's DANGEROUS!
11:05
Просмотров 233 тыс.
271. Hollow 3D RESIN Casts FROM HAIRSPRAY?!!! WHAT?!
26:09
Самый ДОБРЫЙ мальчик!😎
1:00
Просмотров 6 млн
Самый ДОБРЫЙ мальчик!😎
1:00
Просмотров 6 млн