Central AC Not Cooling - Nothing Blowing From Vents & Thermal Imaging Camera Giveaway!

Mikey Pipes - Pipe Doctor Plumbing & Heating & Air

Подписаться 158 тыс.

Просмотров 6 тыс.

50% 1

Giveaway to subscribers only. Friday morning Central A/C Service Call - Not Cooling & No Air Blowing from Vents. Watch Mike Diack, Master Plumber & HVAC Contractor in New York, South Carolina & Florida - diagnose the central air conditioning issue.
Check out this videos sponsor, Kaiweets:
Facebook: / kaiweetstools
Instagram: / kaiweetsus
10% off code: MIIKZS33
Expires: 09/30/2024
Buy from Amazon: www.amazon.com/dp/B0CNVCZWGD
15% off code: Mikey15
(Available site-wide at Kaiweets.com and it never expires.)
Buy from official website: kaiweets.com/collections/ther...
Let's Make The Trades Great Again! Join Mikey Pipes Philanthropy, Inc., an IRS 501(c)(3) non-profit public charitable organization. Our mission is to offer free or low-cost plumbing, heating and cooling services to those in our community who can't afford to hire a professional. Help us here: www.paypal.com/donate/?hosted...
Need a website for your contracting business? Check out Footbridge Media for their amazing special on not only a website but SEO services for only $249/month! www.footbridgemedia.com/?ref=...
Need a CRM or dispatching and invoicing app? Check out HouseCallPro: tinyurl.com/MikeyPipesHCP
What’s in your Veto? Here is mine:
Veto TP-XXL amzn.to/3zX10vg
Testo Combustion Analyzer: amzn.to/3Zd7naH
Digital Manometer: amzn.to/3EDt5ey
Milwaukee M18 Blower: amzn.to/46iTo6j
Milwaukee M12 Fuel 1/4" Impact Driver amzn.to/3I9yLfI
Milwaukee PVC cutter: amzn.to/3sbrdUc
Mini Waterproof Storage bin: amzn.to/3yfgsEv
Wiha Allen Keys: amzn.to/33ipGmb
HIKMICRO B20 amzn.to/33iGklx
Furnace Switch amzn.to/31X89PT
Milwaukee Light amzn.to/3I38Lmh
Wagos amzn.to/34QoiaU
Milwaukee Set amzn.to/33vnQOz
Torpedo Level amzn.to/3no1oOk
Crescent set amzn.to/3GtZeV8
Wiha 7 piece set amzn.to/3rkISaK
Milwaukee step bit amzn.to/3I395Bv
Thermocouple Flare wrench: amzn.to/3noJZ8s
Ridgid 10” wrench amzn.to/3GvRnqa
Fluke non-contact tester amzn.to/31VQgAQ
Klein drivers amzn.to/3qoe21W
Knipex Wrenches amzn.to/3trzFjS
Klein 11-1 amzn.to/3tpsPLD
12” crescent amzn.to/3A0CZ6S
Gerber Gear Pocket Knife amzn.to/3foaW7I
Yellow Jacket Hand Ratchet amzn.to/3nrDgup
I am on Discord & WhatsApp!
Discord: / discord
WhatsApp Group: chat.whatsapp.com/CHZWtZe4KMG...
Raised silver stickers are from:
Armored Decal Company Inc.
35 Victoria St. E, Unit 9
Alliston, Ontario L9R 1T3
(p) 705-435-6665
(e) ken@armoreddecal.com
(Tell them Mikey Pipes sent you)
Please support this channel and Mikey Pipes and consider the following…
Pipe Doctor FlexFit Embroidered Caps
Minimum donation of $37 is appreciated
(If you are international - please add a minimum of $40 for shipping/postage)
Shopping on Amazon? Please use my referral link amzn.to/2PjjS4v
Sticker Requests:
Do you want a sticker to show your support of this channel? Email your request to me! mike@mikeypipes.com
Name
Address
City, State, Zip
Consider making a donation of $5.00, or ANY amount, to the postage fund! I literally mail out stickers all over the globe. I've sent stickers to HVAC guys in Afghanistan, New Zealand & all over Europe.
PayPal is: office@pipedoc.net
Venmo: @PipeDoctor
CashApp: $mikeypipesny
Zelle: mike@mikeypipes.com
Want to send a love letter, note or gift? Our mailing address is:
Mikey Pipes, Inc.
1010 Central Avenue
Woodmere, NY 11598
#hvac #mikeypipes #pipedoctor
Music from #InAudio: inaudio.org/
Other music from MOVAVI STUDIO SUITE 2024 under license by 3:10 Global Holding, Inc.

Хобби

Опубликовано:

4 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 223

@derekmc9580 23 дня назад

Hey Mike. I’ve been a long time subscriber and love the videos. I’m a residential hvac service tech in se Ohio and we don’t have many boilers or steam in my market so I really love the videos about the systems that I never get to see. It been really cool to see how you run your business and your methods when troubleshooting. Your channel is Very entertaining and informative . I would love to have the thermal imager for all endless things I could use it for to make my job as a technician easier and more efficient when troubleshooting. With having a family of five I just never can justify the extra expense to my wife lol. Keep the videos commin. It’s videos like yours that help guys in the trade to keep learning and becoming better techs every day.

@PipeDoctor 19 дней назад

CONGRATULATIONS! You are the winner of the thermal camera. Please email me a screenshot. mike at mikey pipes dot com your details along with phone number. Shipping is FREE.

@jimmomary 23 дня назад

Good afternoon Mr. M. Pipes. First, I truly enjoy your channels' content, both educational and humorous. You've taught me a lot. I am a retired former maintenance mechanic for a factory for 40 years. The work ranged from electrical, plumbing, hvac and manufacturing equipment installation and repair. I also had to do a lot of programming forms in Excel for production records and in-house pc upkeep. Now, with time on my hands I help out a lot of local older folks to try to tighten up their homes and systems to save some money. Times are tough these days for folks on fixed incomes. I've been fortunate over my life and am trying to pay it forward, so to speak. A thermal imager would sure improve "guessing". So, that's my story and consider it my rationale. Also, I hired and unfortunately fired many folks over my career. Your "hunt" for workers is an all too familiar refrain. My observation is that finding candidates worth hiring is getting harder than ever before. May God bless you and yours, all of us and keep the USA safe from the trials and tribulations that the world is offering up. Jim from northwest NJ.

@michaelpaulsen64 23 дня назад

Now that I own my own company, I do see how hard it is to buy tools I need and it’s tough starting your own business but it’s working I could definitely use that thermal imaging camera amongst other stuff on my bucket list for the new company good video by the way

@jakehenrion5255 23 дня назад

Been building my residential hvac business in MA this year, slowly acquiring the tools to correctly do the job. I look forward to replacing many capacitors that Steve Lav carelessly left in the box and shoved into the condensor electrical compartment

@jasongeo2 23 дня назад

Dear Mikey Pipes, I eat ,sleep,and shower hvac Mikey pipes youtube videos. I have a massed an extraordinary amount of knowledge watching your video's and i have been able to apply your tutorials to help service a few elderly people being taken advantage of . It is because of you that i have expanded my hvac knowledge and its because of you that a sweet little old lady in Baldwin has a nice cool home to live out her retirement. Now god has not given me to much in life , but i hope to start collecting and purchasing my hvac tools just like daniel does every week, so i can help myself and others in my hvac journey. Thankyou so much Mr Pipes and i love you. No homo.

@PipeDoctor 19 дней назад

thank you

@beeper7892 23 дня назад

Love the thermal imaging. I am a plumber in Texas. Mikey shooting fireworks inside customers house.

@ALLKCPRO 23 дня назад

Mikey! Thanks for all the amazing training videos. I’m new to the HVAC and plumbing, been studying and just passed my epa universal. I’m a veteran fighter jet technician (Desert Storm era) and this is my “getting back to my roots” career move. You have helped me with this transition and I admire and am inspired by your dedication to excellence! Thank you and shalom! Darrell

@martinkehoe6782 23 дня назад

Greetings from the great state of Louisiana. I just started watching your show recently and cant get enough. I am an installer for the last 10 yrs. My mother has MS and i missed half of last summer and three weeks this summer.The owner of our AC supply company called today for a retired State trooper having serious electrical problems. i believe this camera can help me solve these issues quickly. We give all first responders ,elderly, etc huge discounts.Now lets make America, the trades and the prices great again!!!! Tk you and God bless!!!!

@nubus1987 23 дня назад

love the raw love unedited video, mikey showing how its important of having capacitor secured

@jacksnell213 22 дня назад

I love how you keep it real are you not afraid of hiding your screw-ups and I learned a lot about air conditioning and furnace have weird problems can pop up and killed the unit

@dearontufankjian9823 22 дня назад

Mikey Pipes… Let’s go Bosch! That’s all I gotta say. Keep grinding brother!

@PipeDoctor 22 дня назад

Always!

@markhod1960 23 дня назад

Mikey been watching your channel for years. You and your crew do great work keep them videos coming

@brucecovell5909 22 дня назад

I think that tool would be great for the new MikeyPipesSouthFlorida division. That's right, this is a solicitation for a beautiful HVAC relationship. I already hear the competition wailing. Business is an economic battlefield. I'll be serenading you with my dexterity, brains, endurance and my knowledge

@brucecovell5909 22 дня назад

Like rhymes with Mike.

@brucecovell5909 22 дня назад

Big Daddy Cabana, Hard Rock in November. Nothing like meeting in person.

@PipeDoctor 22 дня назад

Big Daddy Cabana is the shit

@sloopjohnb3605 23 дня назад

Another great video. I watch them regularly and always enjoy and learn. I could use the camera for my efforts in the neighborhood. I help many neighbors with all kinds of repairs. No charge except parts. Most of the repairs are for seniors. Thanks for all your great videos. You’re awesome 👍

@michaelnewman1321 23 дня назад

Mikey Pipes making the trades great again!!!! Thanks for the chance to win

@Myoldiesrecordings 23 дня назад

Came to this channel once to try and self tech my navien tankless and have been hooked ever since Oh and I fan girl your trucks at least 2x a week 😂 Great vids!

@kylekelley213 23 дня назад

Love the channel. Just getting into HVAC. Been in construction for 20 years. This would be a great addition to help me run my business. Keep the videos coming

@PipeDoctor 22 дня назад

Welcome aboard!

@mastop6786 22 дня назад

Just getting started in the trades down here in south Texas. Your videos have been a great motivator while going through school. You do a very good job showing that you can provide quality service for your customers while still having a bit of fun on the job. Tools such as this thermal imaging camera can be a great help pinpointing system issues and illustrating them to the client. As a transplant from the Northeast, I can definitely agree that the AC game is a lot different down here. But keep instilling the same drive that you have into your Florida team and you’ll be #1 in that market soon enough.

@SteveLemahieu 22 дня назад

Hello Mike, just love you channel it’s Fun, informative, motivational……..

@mikemclaughlin5265 23 дня назад

Mikey Pipes. The man with an HVAC plan. Always love watching you uncut and raw videos on all your platforms. I would love to be able to provide my customers with the pride and quality that you do. By using the right equipment for the job. The thermal Imager has so many benefits to help you provide the best service possible. Have a wonderful weekend and enjoy the pull and some nice cold beverages.

@tcollinstom 22 дня назад

When the capacitor shorted out on the unit and left the black mark (underwear check) shows you’re human. Keeping it real. Kudos for not editing that out, the good the bad and the ugly.

@PipeDoctor 22 дня назад

Always keeping it real

@tonydelgrego2906 23 дня назад

Mike I could use this to bring value to my customers. It would also help in finding problems when doing maintenance.

@chuckq54 23 дня назад

It’s amazing how far these cameras have come over the years. We used Flir equipment in our refinery on a daily basis. If you are in the HVAC trades, this tool is a must have in your bag 👍👍. Excellent price point too…

@grateunknown4814 23 дня назад

Nice tool there Mikey Pipes! Those cameras would be a great addition for troubleshooting many problems that may occur in the field. Love the daily vids, keep em coming!

@dishserv2 23 дня назад

Great video as always. Years ago, I remember a couple of guys working inside a large AHU with the UV lights on, all day. 😮 We didn't see those guys for about a week since they "sun burned" their eyes.

@OutdoorRhodes 22 дня назад

Running calls this weekend also. Good luck.

@OutdoorRhodes 22 дня назад

I definitely could’ve use that camera this week

@joshsansone5113 23 дня назад

Mike, been a follower for awhile. Both this and the uncensored. Third year stationary engineer apprentice. A/C, chillers, boilers/steam etc.. The Kaiweets thermal camera would be a fantastic tool to add to the tool bag. Keep up the great content.

@PipeDoctor 22 дня назад

Thanks for sharing

@pedros.c6742 21 день назад

Need it now,great video like always😊

@qblinden21 23 дня назад

Mike - Big shout out from Rockville Centre, long time watcher of your channel.

@Mister_Guero 23 дня назад

Thanks Mikey Pipes for the videos. I'm currently battling one TXV situation after another. I miss pistons. 😂

@instrumenttech4220 22 дня назад

I should win this tool so I can send a shot of my big smile 😃

@seanlin97 23 дня назад

Great info thanks for sharing

@maxsantana1 22 дня назад

Hey Mike. I’m a HVAC and refrigeration service technician. I’ve been doing it for 3 years now. I love this trade because I like to use my brain and I like the physical side of it. I think this tool would be great in my arsenal because there are times where I work on walk-in-freezers where the box is in horrible condition and warm air leaking into it is a big issue. With it I can test it and show it to the clients. Thanks. Have a good weekend.

@palamidi13 23 дня назад

I love your channel Mike, You are inspiring me,I watch every video of you!!

@kcl2862 22 дня назад

Excellent I’ve been a residential inspector and have wanted one for about ten years and originally wanted a flir. The price was astronomical and I wasn’t interested in measuring the stars or far away planets so I passed. I can think of a million times this would have been good. I assume you can download files . Thanks for offering this to your community. A million years ago I lived by garden city and you made me realize I should go so the old homestead

@M.JMechanicalServices 23 дня назад

Hey Mike , Ross and Patrick here from M.J we reside in Canada but we love watching your vids you teach us a lot and provide great content . Watching you we have learned a lot about how to deal with customers and how to run our business in a more efficient way. We love to have a thermal camera as an addition to our long list of tools. Thanks a lot and keep on cranking!

@iggymac3473 22 дня назад

Love the thermal imaging. I'm a plumber in NJ Wining that thermal imaging camera will be a game changer thank you Mike for all you do

@ab-uw4ki 22 дня назад

Would be a great addition to tools for verifying air leaks and cause of heat loss.

@JOHNPHUFNAGEL 23 дня назад

Love me Fridays. I do automotive diagnostics this camera would be awesome addition to my tools

@Thatotter223 22 дня назад

I cant believe you uploaded the capacitor grounding out. Absolutely real and hilarious bro

@PipeDoctor 22 дня назад

Always keeping it real.

@dkinfishing 23 дня назад

New toys who wouldn’t want one Mikey lol. Love the videos keep doing your thing 🤟🏾 I’m a year and half in the trade and been loving it so far

@Techben16 23 дня назад

Mikey Pipes! I enjoy watching your videos so much. Have been following you for a while, supported you in your live streams, I was even one of those special ones to have had a magical wrench on your stream :P - I remember the first videos I watched you were working on boilers!! Cause I could not control my heat with my thermostat.. Then I understood there were zone valves thanks to you. When I called to get the landlord to fix it, I could specify that I suspected my valve to be shot XD And I was right! BOY OH BOY You have progressed very well since then. I have been getting more and more interest in HVAC - And it's always a pleasure to watch you in your trade, and with the occasional bonus content where you smelt copper. I work in IT, and a thermal camera would be so useful to help visualize bad cooling inside computers. Keep it up Mikey Pipes!

@Techben16 22 дня назад

I just got an email saying I was the victor?? OMG did I really win Saint Mike!??

@troydm70 22 дня назад

Mikey Pipes. According to my wife, I radiate the emotional warmth of a frozen pizza. This thermal camera might finally prove I have a heart... even if it is just a lukewarm one.

@koomo801 21 день назад

That banner in your shop…and you practice your trade on Long Island? You, sir, are a brave man /salute

@RobertTuck-vo8cw 23 дня назад

I need one of those! It would really help in troubleshooting HVAC units, TXVs, finding flow restrictions in tubing lines. I used a very expensive one in my stint (25 years) as a volunteer fireman.

@tylerthibodeau3024 23 дня назад

Mr Mike! A thermal imager would be a really nice addition for my tools. I primarily work on hydronic boiler systems and do lots of radiant inspections so this would be a really nice upgrade and value to bring customers for inspecting baseboard/radiant loops to ensure everything is good to go. Absolutely love the videos and keep up the great work.

@johnpadua9115 23 дня назад

TGIF. I do comercial hvac love your vids and sense of humor. Thanks for the videos

@PipeDoctor 22 дня назад

Glad you like them!

@dougfore1154 23 дня назад

I like your videos Mike and just found your channel. I’ve been doing HVAC out in Cali for 15 years I could use that camera mine was stolen a month ago.. Hope your 4th was a blessed one

@AsForetold 23 дня назад

Mikey Pipes!! I need this Thermal Imaging Camera to measure how pissed off the customer is when arriving at the job site!! Then after an excellent job is complete, I will retake a measurement to document how pleased they are! Thank You Mikey Pipes!

@rcytb 22 дня назад

RE: Thermal Imaging. I need to be able to identify thermal leaks and which windos to replace. Thanks!

@CC-hv5hk 23 дня назад

Its always nice to watch your Video's. Here in Illinois that camera could come very handy for furnace season , boiler, and ac season. Because if your not testing your guessing. Keep up the educational videos.

@JasonStromhvac 22 дня назад

Hey Mikey Pipes. You have given me a ne look on customer service. I used to hate being on call. But watching you making the best out of every single call. I appreciate that different viewpoint. And literally has changed my whole attitude. Stay positive and keep pushing these vids. I enjoy knowing you will have a new video each and every day. Have a Great 4th weekend. Guess what Im on call this weekend also. lol.

@epagano37 23 дня назад

Hi Mikey pipes I watch your channel and learned a lot and I am still learning. Love watching your channel. Just had a mini split installed and central air. Trying to get tools so when warranties run out I can fix it myself. But can’t afford most of the good tools. I do a lot of work for my mom at her house she lives alone and I do my home maintenance as well as my own and I help a lot of friends with there homes. I would greatly appreciate this tool as it would add another tool i don’t have to my arsenal on my to always helping the ones I care about maintain there homes I love to help others and give back to the ones in need thanks. God bless America and Everyone at Pipe doctor. If you ain’t testing your guessing.

@quintoncross2069 22 дня назад

Greetings from south carolina i have learned alot from your videos and one day i hope i can grow a business as good as yours thanks for sharing knowledge with technical and business

@BuiltLikeThis 23 дня назад

Mikey! Love your vids. Especially uncensored channel hahah. I do agree you should have your own TV show. Going out on my own in august and this tool would be awesome to have in the arsenal. Keep killin it

@DevinHVACInc 23 дня назад

Hey Mike. It’s me Dev. I can definitely used a thermal imaging camera for my ac work. Since watching your videos for several years now, i been trying to keep up with the new tools your team been using. I can also do local pickup and save on shipping.

@garykeel5415 23 дня назад

Hi Mike. Gary Keel here from Toledo Ohio. I started Glass City hvac about 26 years ago. Small 11.5 person company. Been watching you for about a year now, and I can emphasize with you so your content is very entertaining to me. I could afford to get this item your giving away, I am old school and would think I already have a thermistor on my fieldpiece so why spend the money. So I think you should do the old man a solid and give it to me. I end up buying my guys all the new toys, but even though I still run a lot of service calls I still use the old school tools I was brought up on. So this is me throwing my hat in the ring.

@donhorn548 23 дня назад

Thank you

@ZenRanger94 22 дня назад

Hey Mikey pipes, I've been in the trade for about 3 and 1/2 years now (Air Force veteran stuck in retail management hell for a few years after I got out. Decided I wanted to do real actual meaningful work and got involved in the HVAC trade). As most people, I started out as an install helper but quickly worked my way over to the service side. I work for a small company and, unfortunately, don't get a lot of hands-on mentorship from my boss, so I have to rely on my own studies (just finnished my apprenticeship class), and watching you and various other HVAC RU-vidrs to help expand my knowledge in the trade. Thanks for the information and help that you've given me so far, look forward to learning more. Btw, can you even call yourself a tech if you haven't been zapped by a capacitor at least once? Lol

@gtpforever 15 дней назад

Wonder if the sensing bulb is stuck leaving those pressures that way when off? I probably would have put the bulb in hot water to see if it released the pressure

@PipeDoctor 15 дней назад

Maybe

@swaterman08 23 дня назад

I have been around before you were looking forward to 10k subs, I do IT and maintenance and would love to buy more cools, but paying $1200 a week for child support screws up those plans. I was able to determine our MrCool Cm12 was not working and who I needed to call, thanks to Mr Pipes. I was going to call HVAC Guy, but found out I have no power going to the unit and called our electrician.

@isb170swap8 22 дня назад

Nice thermal camera. Would be useful in my trade as a AG technician. Thanks for the great videos.

@cavy95 23 дня назад

You have saved me $ by showing me how to. Thank you sir!

@HERITAGEWV 23 дня назад

Subscribed to all of your channels, and Daniel’s, and Connor’s. I watch all of your videos and usually like and comment on every one of your uploads. I appreciate the work you do and the effort you put in to keeping the content consistent and raw I could use thermal imaging for many jobs out in the field, I think it would especially be handy while working on boiler systems with radiant heat.

@PipeDoctor 23 дня назад

You're the best!

@racingnut41 23 дня назад

Loved the video, Mikey Pipes. It's always an unknown with a/c equipment. I've been watching your videos for a while. I've been in the trade for almost 7 years now. I've been thinking about getting a thermal camera. Do a lot of cooking and refrigeration equipment.

@beefing313 21 день назад

Well, even though I am diametrically opposed to your political orientation. I agree that we need to strive to make the trades great again! If I’m the winner of the give away, I will be better technician and will help to make the trades great again, one tech at a time! Thanks for your consideration. 🇺🇸

@Everythinglui 23 дня назад

Mike all I tell my 3 year old before we go to bed is “it’s me” and he says “Mikey pipesss!” I’ll def put that camera to good use now and specially the winter, best of luck to the best comment Mike always follows through!

@mrsmith5114 23 дня назад

We all saw that :) Would love to use that camera in my home. 2.5 ton AC struggling to keep a 1400sqft home cooled. Set on 75 from morning to night, but gets up to 84 in the home during the hot point. Would be VERY handy to locate the hot spots so I could insulate the old home, and also help fellow neighbors around me. But either way, still will keep watching :) Best of luck.

@mrsmith5114 22 дня назад

@PipeDoctor7 Thank you fake Pipes :)

@throttlebottle5906 22 дня назад

I'd say it's an non-bleed txv (hard shut off) meaning it will hold pressure and bleed very slowly. that's fine for a scroll with an discharge check valve and internal unloader, but a regular compressor would be starting against the load and draw large start currents (or fail to start). looks low on gas I guess, assuming it's 410a. txv is chooching trying to cool the evaporator, which may or may not be frozen or no air flow. I should watch further before guessing. lol *edit* yep, by 6:48 dead blower found. 😎

@markhathaway1683 23 дня назад

Hey Mike. Long time viewer and upstate plumber here. Keep up the great content. Make plumbing great again!. A thrermal camera would definately help me with troubleshooting

@dustinbisson3045 23 дня назад

I really enjoy the videos. Keep up the good work. I could really use the camra to help better my game as a service tech and with three kids under the age of six in this economy most of my extra money goes to food diapers and a roof over her head. 😊 Again, thanks for the videos. Keep up the good work

@josephpuchel6497 23 дня назад

Hey Mikey Pipes excellent tutorial . I would like that thermal Imaging camera because it very much make my diagnosis quicker and decisive on not only HVAC but my 2nd business as high efficiency window installation. Thank you

@ADOENDRA 23 дня назад

Why I would like the thermo camera? Because I have learned a lot from you and I would like to learn even more investigating all the cold spots in our house.

@nicholastaylor1546 23 дня назад

Mikey - this would change my diy job as I do home mechanics and will help with helping putting my neighbors cars back on the road quicker without raising prices

@JohnHolliday1911 23 дня назад

You won me over from the video where you used your own floor mat, and boot covers before you entered a clients home. I really thought about that, and the level of respect that showed. I admit, I........"borrowed" that, and have been using it with my service. Something so small, and it blows people away. Thank you for that. Why should I win.....not really sure that I have a reason better than anyone else, but, I have been meaning to post and tell you that, and, it's a good chance that you'll read this.

@raymartin4027 22 дня назад

Mikey pipes I’m a 25 year veteran in hvac work on Gas, Oil, Heat Pumps, and A/C I work for a small company but I would love to up my game and provide more solutions for customers thanks

@kevins4990 23 дня назад

Hi Mile love your informational videos and it helps as a home owner I can do the prevents on my home A/C and my cars A/C and that took would help a lot Thanks

@redneckways1617 23 дня назад

You have to check the amp draw with the door in place or you want get an accurate reading…I have seen amps be almost half before comparing door off vs on…

@Balticblue93 23 дня назад

100% That fan needed the door closed and it was drawing high amperage also from overheating. It was fine after the capacitor was replaced. Zero reason to sell them a Bosch in this instance. Oh well, I guess.

@throttlebottle5906 22 дня назад

and not also be clamped onto the wire and the metal box at the same time, that greatluy skews the reading not having jaws shut fully/touching. motor was a bad stinker anyway, since they didn't shut it off right away when it went southand first started to smell hot. it should have been emitting a hot smell while still running as cap slowly failed. oh well 😉

@stevenvais4822 23 дня назад

Clean cap first?

@tphvac87 22 дня назад

Liquid line restriction or bad txv I think. That’s some wild shit people don’t understand that preventive maintenance is so important and just expect these systems to last forever. Hahaha I could use that camera been wanting one forever. Long time subscriber life long fan!

@robbiebennett8185 23 дня назад

Hey Mike love the videos and i need that camera. Lol. I'm refrigeration tech in NC

@jcaleca60 22 дня назад

Let's make the trades great again😊

@markcotter2355 23 дня назад

Does it pass the shake test?

@scotts4125 23 дня назад

I just replaced my 4 UV 3 year lights. I have the Apco duels. They were just under $600.

@austinhenley691 23 дня назад

It would be awesome to get a thermal imaging camera! Although I’m in the diesel/allison transmission trade industry I would like to see if you could find injector issues by inspecting the exhaust. Checking the coolant system for thermostat bypass. Wheel ends for bearing failures! Make the trades great!

@coastalcarolinarocks 23 дня назад

Hello Mr mike. Been 8nnthr field for a little over 3 years and would love to have that to aid in becoming a better tech. Thanks mike

@throttlebottle5906 22 дня назад

nice one "Mikey *short it out* Pipes" lol

@PipeDoctor 22 дня назад

Glad you enjoyed it

@DanielMalkokian 23 дня назад

I’m in HVAC and never used a thermal camera but I’m sure it will help customers see what they don’t understand.

@Eddy63 23 дня назад

I'm not worthy MP ... Good vid as usual & be good to the Campbell Brothers ... Thx

@kennymayo4578 23 дня назад

If I was the lucky one I would take good care of it, give you feedback on it's performance if wanted, and most definitely use it to make stacks😎

@kennymayo4578 22 дня назад

@PipeDoctor7 Awesome

@kennymayo4578 22 дня назад

Now I can truly leave no stone unturned 😎

@kkovler1 23 дня назад

It's very simple, if you don't have a imaging camera, you will never know what your missing out on!

@kkovler1 21 день назад

Mikey when is the giveaway going to take place.?It was not at 3:00pm today!

@benf7259 23 дня назад

Rebbe Pipes, I could use one of those for my real estate broker inspections to catch those greedy sellers who fail to disclose leaks, broken systems, and overall kaki. Also could use it during Maariv minyon to catch the guy who always blows heat seeking gassers.

@hkhsm359 23 дня назад

Hi Mike It will be nice to get Thermal image camera from you and will be helpful for an engineer and also work trade job. I am long time ago was subscribed because like your work ethic and how you troubleshooting issues. Thanks for sharing your experience. Sharing is caring. Happy 4th July to you and your family

@nickc6399 22 дня назад

I’d be happy to win that thermal imaging camera for work. I do commercial heating and cooling along with electrical. It would be useful for both to find issues with bad lighting ballast, breakers and everything hvac. It would help me quickly find the issue and give a visual to clients so they can see exactly what and why something failed.

@nickc6399 23 дня назад

How about that backwards drier not allowing pressures to equalize?

@PipeDoctor 22 дня назад

Yeah that’s a possibility

@brndnvnd1 22 дня назад

Subscriber ✅ I am in the trade and do a lot with radiant floor heat. This would be pretty slick.

@ericr2zz 23 дня назад

Can i also have the pinup calendar on the wall at the intro?

@MrTynet3 23 дня назад

Mike I don’t work in plumbing or HVAC but I think I could use one of those cameras in my trade, IT. I work with servers and network gear and the ability to pinpoint hotspots in a server rack could save me a lot of time. I promise to put it to good use if I win. I’ll even send ya some videos from our server room with the thermal imaging camera in use.

@derekmc9580 21 день назад

Who won the imager?