I am 71 years old. I have both the HF 5-ton electric splitter and the HF 10-ton manual splitter. My electric sits up on a stand. For any thing too heavy for me to lift...around 60 lbs...I use the manual splitter to break the round in half. Once done I can lift the piece onto my electric to finish the job. I do up to 30" rounds, mostly red oak and other local hardwoods. When they are too heavy, I have a pair of sloped car ramps I can roll the round up to get it on the manual splitter. One reason the manual seems unstable to folks is they are using it on dirt or grass. I use mine on the concrete floor of my covered back porch. Pretty stable with a flat hard base for it to sit on! I average around 3-4 cords a year with this set up, what I need to have for a harsh winter. Some winters are mild enough that I only use 1 1/2 to 2 cords, so I have extra racks to set that aged wood on! Work smarter not harder! HA HA
@@mikeh8228 Lucky. My manual which was given to me because the neighbor didn't know how to use it and I guess it cluttered her garage. I used it off and on. It leaks like a sieve.
Have you ever had it where you pushed it out too far and then it wont retract? I extended it just to the log supports. Then, like i said, it wouldn't retract on its own. I can pound it back. It was my first log so im about to just take it back, but wondered if you or anyone had experienced this.
I think you were very fair and I would only have given it half a star more. I have had mine for three years, love in Wyoming, winter is pretty harsh, my fire place is my only source of heat (includes heating water for bathing and dishes etc) and cooking. So needless to say, I am close to 2 full cord of wood per month +/- depending on the wood and life. I have a broken back and ruptured discs in my neck, so swinging an axe or mail is usually harder on me than this little guy. Has been a complete life saver for me, and the fact that I do not have to go out trudging through 3 feet of snow and ice with sub zero temperatures and layers and layers of ice and potentially fall and paralyse myself is a huge plus. The other thing, hydraulics don't much like half frozen fluid lol,. All in all, I really love it. The cons , yeah does require much bending, but because of that, I don't have to houst a big very far, and have actually had to roll some onto it. I sit on my little wood stump, roll a log over to me, lift it those six inches and sit on my behind, yes sometimes I have to get up put weight behind it, but still. It is heavy and hard for me to get in the house by myself, but because of the wheels, I mostly don't need help. The only other thing I really don't like, is the bracket that holds the log, we don't always get to choose what the word looks like, these brackets seem to get in the way more that they actually help. Also it will split logs that are huge circumference (bigger than me) and I love the longer ones as my wood stove will hold 30 inch long (9*10 door). Sorry this was so long. This thing in my world, is way past it's weight in gold, and payed for itself the first week I had it.
My body is just like yours jacked up, no pun intended and so without spending a fortune I am convinced to buy the same machine. I already have a repurposed table to elevate it , to eliminate much less bending.
Have you ever had it where you pushed it out too far and then it wont retract? I extended it just to the log supports. Then, like i said, it wouldn't retract on its own. I can pound it back. It was my first log so im about to just take it back, but wondered if you or anyone had experienced this.
You're right them brackets are a nuisance. I cut the upright part of them off. They hold the log up higher than it should be if its a wide log. I also had an extra wedge welded up top of mine to double the wedge height and get a higher bite on them big logs. I can't wait to try it out on some big logs!
I just got one of these, they work great. I would give a perfect five stars, except that (like my shop press) the bottle jack makes this whining sound as it retracts. Is that just a Harbor Fright thing? I'm wondering if it's actually the cries of the Chinese prisoners who build the tools.
Have you ever had it where you pushed it out too far and then it wont retract? I extended it just to the log supports. Then, like i said, it wouldn't retract on its own. I can pound it back. It was my first log so im about to just take it back, but wondered if you or anyone had experienced this.
I bought one a couple of weeks ago and for the price it is fine. Would prefer an $800 gas powered splitter, but this works fine for the back porch for a single fire place for the cheap (or free) wood that is not already split.
I love mine for the money but right away I blew a seal on the smaller pump handle side. Am returning to get another one, prolly just a fluke. It still works on the difficult side but need both sides working. I think its fine tool to have for the money. I give it a 4 🌟. Update! Did not return it because it needed to be bled and its working fine. I love it! No more swinging a maul, I just take it easy and split a little here and there. Its quiet and I like that.
Same thing happened to mine today day one. I bleed it and it worked for a minute but quit working again. It appears to be low on fluid so I'll get some and try again.
Have you ever had it where you pushed it out too far and then it wont retract? I extended it just to the log supports. Then, like i said, it wouldn't retract on its own. I can pound it back. It was my first log so im about to just take it back, but wondered if you or anyone had experienced this.
I have had mine for 13 years now and have used the crap out of it. Just changed the hydraulic fluid for the first time. Garage kept when not in use. I also had the electric one for 10 years and it died this year. Bought a new one -hope to get another 10 out of this one.
We have the same splitter. We've used it 12 yrs now. Ours has been modified with two 10" wheels on the jack end of it plus a tow tounge for pulling behind a riding lawnmower or 4 wheeler..
Have you ever had it where you pushed it out too far and then it wont retract? I extended it just to the log supports. Then, like i said, it wouldn't retract on its own. I can pound it back. It was my first log so im about to just take it back, but wondered if you or anyone had experienced this.
this by far has been the best review of this manual log splitter. I've been chopping Maple, Live Oak, and some other Oak family tress for years and I'm getting up in my age. Oak that I cut are not as big around as the one in you demo but this video gives me a positive spin in my decision making...thank you for a good review.
We had a dead tree on our property for a few years that we just cut down, Husband couldn't split it. Used his mom's 4 ton electric splitter to no avail. Bought one of these. Struggled, but it worked. After seeing how stringy the inside was and asking his family what they remembered about the tree when it was alive...it was a shagbark hickory. This machine is well worth the money.
I purchased one at Harbor Freight this past Tuesday. Turned out to be a "lemon". The "quality control" phase of manufacturing was skipped. The bolts securing the ram to the base were missing and the c-clamp was loose. Because the manual lists the wrong size bolts in the parts list, it took several trips to the hardware store to find the correct size. After securing the ram, I followed the advice from another video that recommended bleeding the air from the system before using it. So, following the instructions in the manual, I managed to open a "can of worms" and I made a hydraulic mess in my garage. To make matters worse, after making several attempts to properly bleed the system and add fluid, I rendered the unit useless. As a result, on Thursday I returned the splitter to Harbor Freight, no questions asked. I did, however, opt to exchange the POS for another. Today, having learned my lesson of what not to do, I will proceed to see just how well the machine works straight out of the box. Two big takeaways from my experience-kudos to Harbor Freight cuz they were great! And don't expect much from the manual. It's inaccurate and not very helpful. Hoping for the best on the second go around.
Just to follow-up on my previous post-my second go around has been flawless. I started using the splitter straight out of the box, splitting pretty gnarly oak and hickory. So far, so good. And, knock on wood, I have yet to see even a hint of hydraulic fluid leaks. I am a happy man!
I agree. I just purchased mine last week. Using, discounts and coupons, the cost was $95. I can live with that. Stability, was the only issue I saw as well. I wish they had some type of fold down flap to place your foot or, fold out legs when needed. I happy with it. And the price cant be beat.
Thank you Mr. Long excellent review I've got 6 nice piles of ash trees cut 18" by power company, in my awesome neighbors yards, I will be cutting up this week was going to rent one for $100 for 24 hours I think I'm going this route, I have 3 burn pits total and a fireplace in the front room. TY so much, for reassuring my plan of action!!!
This is the best manual splitter on the market as far as this old man is concerned. And it stores fine, sitting vertically on the wheel end base...takes up only about 9" by 9" on my back porch! LOL
Just picked one up today and already used it. Glad to see this torture test, as I was timid at first. The smaller pieces it split like a champ. I'll be running it through the ringer over the next week.
This is fine if you're splitting just a few days worth of burning. I burn two wheelbarrows of wood a day in my stove. That's a lot of wood to split. It'd take me all year just to split with this. Unfortunately.
with this $100 unit to do the larger pieces, just purchase the 6 ton HF electric splitter. Had this combination for several years now and when I need to split wood, I can get it done easily. The electric splitter runs about $250. If you buy both, you have the cost of using a noisy gas machine for 3 days...then your use is "free".
Just like the American.? Sun Joe that it mimics, the HF knock off and the SJ both could use a stabilizing cross piece of steel, drilled and bolted to the underside of the flanges of the main beam of the splitters forming a cross. Seeing just how bad buying Chinese stuff is to the American economy, I have shifted to non-Chinese sources just because I can 🇺🇸. I will also note that the electric-hydraulic ram on a rail type splitters are worth the extra $$ as you get older. It also struggles with Oak and larger logs which I subsequently let age so they begin getting cracks as they dry out. On the ornery oak logs I will score the logs on the end with an X using a sharp chain saw a couple inches deep; then I do the first split with several wedges and sledge hammer. The splitter then makes quick work of the rest. With the hydraulic splitter, I found that I could do in one day what it used to take a week doing with the old faithful wedge & sledge. God bless our sons who bought the hydraulic splitter as a Christmas present. 😇😇
This manual model seemed like a good idea. Cheaper, a little work out at the same time. no gas, no electricity. And it's pretty beefy and powder coated painted. Its "design is more than a little problem" as far as I'm concerned. I'm trying to split some 12" elm crosscut circles about 4 to 5" thick. Not having a very easy time of it. One problem is, elm is tough, but the wedge is way to large in its splitting angle. The splitting wedge point goes in the log about a 1/2" and then things quickly load up. Loading up to a point just short of bending the pumping handles. If it splits, it is usually violently and explosively, throwing pieces of wood 4 to 6 feet. The other problem is the log support cross pieces. These snag any protrusions on the log, (why in the demo's the log supports are all bent), and stall out your efforts. I'm going to weld on some angle iron supports running the length of the stroke on either side of the beam to try and prevent this. All in all, it is a nice idea, but doesn't work for me at all. An axe is a lot quicker.
I’m glad to hear that a lot of y’all are pleased with this splitter. I am not so fortunate. I’m on my third one, bought the replacement warranty for the first two, didn’t on my third time exchanging it, now I’m stuck with a limited functioning splitter. The power side pump failed on all three. Trying to split Texas Oak with only the fast side function working ain’t gonna happen, it only dents the wood before the handle starts to bend. I’m gonna try tearing into it and see if the Check balls are clean and in good shape and hopefully solve the issue. I’ve already filled the reservoir with jack oil and bled the air out. Not impressed so far.
Have you ever had it where you pushed it out too far and then it wont retract? I extended it just to the log supports. Then, like i said, it wouldn't retract on its own. I can pound it back. It was my first log so im about to just take it back, but wondered if you or anyone had experienced this.
Have you ever had it where you pushed it out too far and then it wont retract? I extended it just to the log supports. Then, like i said, it wouldn't retract on its own. I can pound it back. It was my first log so im about to just take it back, but wondered if you or anyone had experienced this.
Thank you for this video! I split almost exclusively osage orange (hedge apple) so I don't think this machine would like it, but that is what I needed to know :) If it doesn't like oak too well it will hate osage!
I like it a lot. Works great. Two things: It's designed to stand up straight on the jack end, so you can wheel it into a corner and it will take very little space (secure it if you have kids!! It'll crush 'em.) Secondly, when you cut the straps, the top of the box lifts off, then you can stand it up and wiggle the splitter out and save the box for storage. I was so eager to try it out that I just bubbaed the box and ruined it.
I've split 5 cords through it so far. Does what I need it to. ru-vid.comUgkxUyQswtttSffRMblGbrhCvZn7JkhtG1-7 I scrounge all my firewood and am not equipped to handle big wood, but for logs up to 24 inch diameter or so, it works great. I've been amazed by some of the gnarly bur oak and elm crotches it has split. For the tougher stuff within it's size range, you might have to study the piece a bit to decide the best attack, but if you split smart it's up to the job. It did arrive low on oil, and I was would have nicked it half a star for that, but it has regained my full confidence. UPDATE NOVEMBER 2021: Still going strong after all these years. I love the one-handed operation. Hope it's still in production if I ever need to replace it
appreciated this review. i feel like if there were more manual splitters like this it would make for a good projectfarm like video heh separately. was curious what your hat meant ... were you at the insurrection? googled 'blue line flag' and it came up with: "The thin blue line US flag has appeared regularly at Trump rallies. The flag, which ostensibly stands for solidarity with the police, appeared as well as at the January 6 United States Capitol attack, during which police officers were beaten and attacked by the mob of Trump supporters and far right extremists."
Thank you Mr. Long. Great review, very well articulated. I just bought one and will follow your info, as well as the others commenting here below. I'm a newbie to log splitting, and been doing it the hard way with an axe but have injured joints now as well as torn cartelidge, tendons, and ligaments, as well as arthritis so this machine will help alot. Look forward to seeing more of your work.
Just bought mine today. First log split in half, then split each half, all with no problem. "Slick" I said. After the 2nd split on the 2nd log, the piston wouldn't retract into the "base." I have a call in to customer service. (I obviously turned/opened the manual "valve"). I also opened the oil plug, wondering if there would be any air release. Nothing. Any ideas?
Aside from the obvious, making sure there isn't anything preventing it from retracting, try lightly taping the piston with a hammer. If all else fails, you may have just bought a dud that will need to be exchanged. I've been using mine for 3 years without issue.
I bought mine a little over a year ago. Haven't split tons of wood, but it really comes in handy and works great. I leave it on one of the bench seats on my picnic table covered with a tarp. One problem recently...I noticed fluid leaking from the high pressure piston. Wish someone would post a video how to repair that. Probably just a seal.
I bought one and after about three weeks the U clamp bottom broke and it would no longer retract. The clamp seemed to be made of aluminum or a cheap pot metal. A chain is only as strong as it's weakest link. I recommend AVOID.
I will say it’s also safe compared to swinging a ace or maul which any man should do but this machine can be run by a ten year old girl without any risk or getting severely hurt
Works best with squared off well-seasoned logs. Locally free avocado wood is available and it handles that without a problem. I put the splitter in the front bucket of my Kubota tractor, and bring it up to about an 18" above ground level, much easier on the back and a great way to move it around. The workout is actually a bonus if you are interested in building muscle without a gym membership! For a 100 bucks you can't go wrong, and spending an extra 20 bucks on the one year return plan is a good idea. The side lug on mine bent also, but it has no effect on the machine's function. Highly recommended.
Have you ever had it where you pushed it out too far and then it wont retract? I extended it just to the log supports. Then, like i said, it wouldn't retract on its own. I can pound it back. It was my first log so im about to just take it back, but wondered if you or anyone had experienced this.
And, four years later how's it working? Are the seals leaking? If so when did they start to leak. HF products are low quality. I won't buy from the store because of this issue. In the past I've ended up with true junk and returned almost everything I've bought. I'll buy tarps and things like that, but no machines. My neighbor gave me hers after not being able to figure out why it wouldn't work. I took it and found no fluid in the thing. I added fluid and have been splitting off and on for a month or so. However, the seals do leak after using it the first time. Not impressed with that. I'll keep it until it fails and then make it a spring splitter. But for only buying hydraulic fluid, I can't complain
I notice you asking many of the commentors about bad or leaking seals. The lady, as the original purchaser, could have taken it back and got another one. I like HF return policy!
Looks like too much work for the amount of wood and thick logs I’ll be splitting, I’ll be purchasing some gas operated larger machine thanks for your video
As you get older, you will change your definition of work. I used to do everything with wedge, a splitting maul and an 8 pound sledge, then when I hit about 55 years of age, I discussed with my wife, my need for a mechanical splitter. I settled on the HF 5 ton electric, set it up on a stand from my shop and built a table on the opposite side of it to catch the pieces so I do not have to stoop over and pick them up off the floor! A few years later I got some free firewood and was splitting the larger rounds manually to get them into quarters that I could lift, but I tore the inner and outer legiments in my left knee, so after a couple of months of recovery, I purchased the 10 ton manual unit. NO MORE MANUAL splitting for this old man (72)! Now when I have large rounds, I bring them to my back porch with my tractor, split them in half and use the electric on them to make firewood. As a young fellow, a splitting axe and maul and wedges are faster, but as you age, it gets too slow to be practical, even when pacing yourself!
I went with the SunJoe 10 ton manual splitter.....same machine but with a longer 11" throw on the hydraulic piston. I set my splitter up on 2 cinder blocks.....just off the wheels on one end & under the splitting wedge on the other.....rock steady....no imbalance....and 8 inches higher off the ground....not as far for pops here to bend. I split oak & pecan, so I use the high torque side alot......sometimes having to "push & hold" while I listen to the log slowly crack. I've done up to 16" diameter rounds.....but I still swing an 8lb maul, so I'd rather bust those open and make it a bit easier on the splitter. When not in use, I just cover it up w/ a tarp...."worx fine lasts a long time" I've had mine 2 years & it's been a workhorse for me.....we can go through some firewood in the old fireplace.
@@mikeh8228 I did take it back for another, and the second was worse than the first. So I got my money back. Then I bought a sunjoe splittter and it works great.
From looking at the bark, the "oak" around 5:00 is white oak, tougher than the various red oaks, which are almost explosive IMO. FWIW. All oaks are slow to air-dry, but worth the wait.
So I bought this yesterday - split the 1st log and now the ram will not retract - what am I doing wrong? It seems you just twist the handle and it is supposed to retract?
Turning the knob counter clockwise should release the pressure and allow the ram to retract. The two springs on either side pull the ram back when the pressure is released. Make sure nothing is jammed preventing the ram from being retracted. If all trouble shooting fails it may be a defective unit
Thanks for the reply - nothing is blocking that I can see...might seem like a dumb question, but it has a cotter pin underneath the unit.below the I-beam ..should that be removed to operate...I can't really see what purpose it has if not for that...going back to HF in a bit if that is not the solution...
Wow, this looks like a good to tool to use if your limited on hauling capabilities and space. I volunteer with Jackson County Fuel Committee and would see this being very useful.
I’ll stick with a gas one I’m too old for all that pumping. Yea I say it will cost later down the road if ones back gives out and has to go to the hospital their a big hospital bill
It saved my back from having to use a maul all the time...that is much harder on a weak back than pulling those handles is! And I hate all the noise of a gas machine! I have converted almost all to electric now. Best chainsaw I ever had is a corded 18" machine...lighter weight, no trouble starting, quieter, and less noise to me and the neighbor!
Not sure why you would want this. There's things called splitting axes and mauls that are faster. If your elderly and can't swing an axe you probably can't pump that thing all day either. If your out of shape splitting with an axe or maul will fix it. There are hydraulic splitters that aren't much more expensive that these manual splitters. Only thing I can see is portability with the manual is better but again if your following the manufacturers warnings on log size a axe or maul will do the work just fine. Idk kinda just seems like a product for lazy people that can't spend an additional $150 for a hydraulic splitter.
Unless your fast hurduling your way toward fifty years old with a bad back and hereditary arthritis .. Then talk to me about swinging a maul. Congratulations on having a body that is strong as your mind is. Must be nice. One day you too will know.
Faster if you have the body. I only have good use of one arm. Just split about 1/2 a rick of pecan 3 days ago with an 8 pound maul. Man does it hurt today!!!
