CFMOTO Clutch Mods with AIRDAM CLUTCHES | How to remove CVTech Clutch Primary & Secondary 

Great explanation of how the CVT works to those of us that have just a basic understanding. "At 5% throttle, it's shifting into 2nd or 3rd gear, this boggs the motor down"

Love the channel. Just bought my Cforce 600 today. Can’t wait to rip it up!!!

Dang Airdam Clutches is on the ball!! I live in meridian ms and i ordered my clutch kit yesterday at about 3 pm and it arrived today at 10:30am. Can’t wait to install

at 8 minutes... thats my only problem with my 2020 cfmoto 600. You described what im feeling perfectly!

Great video as usual! I like how thorough he was in his explanation. Looking forward to the follow up video.

Come on Blake I've been following you I could send you pictures if you want I got my 30-in cryptids on here you got to tell me what stages he went through on your clutch so I can either send it out or do it myself. I took one hell of a ride yesterday because of Corona virus I could take the river right down much further than I ever could before because they're not closing the locks. Is one of the best rides you've ever had but I need to know what I got to do so I don't burn this belt up cuz I can tell that there's definitely more weight on these tires. Help a brother out awesome video again thank you for doing as much as you have been doing for CF Moto and enjoying it. You been the man

Absolutely excellent video! I just wish I would hear something back from Adam. Finally did get an initial reply to emails asking for details, riding style and conditions, etc., I replied and then nothing. Haven't heard anything more from him in several weeks now. The penny trick it is I guess.

Yeah man. This is a great video. I just put 32s on my 950 and it's great to see all the options that are available for the overall performance of the machine. Thank you very much.

Great video. Going to give him a call. As my wife just smoked the belt on her Zforce 500trail, so I guess this would be the perfect time to get the clutch done after putting 28inch bkt 171 tires on it.

You guys are awesome I just bought a cforce 800 3 weeks ago went trail riding last weekend this machine. Awesome you guys have made it great do you have the information to work on this thing need to do a brake job on your 800 so I know how to do that LOL keep up the good work

Great info. Another wonderful and useful vid. Thanks Blake!!

Can’t wait to see the next video on installing the kit for the cf600 I will be calling Adam

I just got my 600 cforce on Friday and it's exactly like he described

Great vid and a ton of great info. Brother u keep doing ur thang and you are going pleases. Thanks for sharing 👍

Just got a CForce 625 (same as 2020 600 in the USA), very interested to hear Adam talk about it and can't wait to see your post on the install - I'll definitely be contacting Airdam, as he is spot on with the 600 diagnosis. Hope they can post to Australia! Thanks for the videos...

Great video

Great video I just emailed Adam for info on a kit for my zforce 800ex I upsized tires and devolved an odd bog hesitation on take off

Just a heads up. I installed the clutch kits in a 2021 600 touring and a 2021 800xc yesterday. Both machines needed an 18 , 32 and a 35 mm socket. Not a 30. I don't want anyone to have to go out and buy the proper socket in the middle of the job like I did.

Love the videos I have the same 2020 600 but blue and just dropped it off at Main Street Thursday I’m getting a 2 in lift 14” rims and 28” outback max tires if you don’t mind me asking what did it cost to get the clutching done cause I have a feeling I will need it

Thanks brother.

Like the video emailed the company to find out what kit to buy for my ct moto 600 and never heard hack from them .shame seemed like a good place to do business. I guess I'll buy from another company.

Nice video. Can’t wait to see it done and your thoughts on the ride.

A lot of good information

That's a shit ton of GREAT information!!

Hello. I have a segway snarler 600l. Can you suggest what to change in the variator to become more powerful. And where can you buy? What details are needed? Spring? Weights? How much weight?

What weight flyweights and spring was primary changed to on 600?

Cool tutorial. Thanks

I just wanna know if yall are gonna build a kit for the 110s and a tune. For em as well

If you remove one of the shims on the primary spring will it not reduce RPM clutch engagement buy effectively softening the factory primary spring?

I just bought a used 2022 CF Moto 600 it only has 40 Mi on it. The first thing I noticed it's like a snowmobile it revs a little bit and then slams into gear

Great Viedo he needs to add turnaround time for cluch mods. The price of these mechains are great and with a little mod you can get enough power to hang with eveyone. Yall need to link up with a big channel Like SXS blog and have a good day of it so folks can see this is a good toy for not so much money

Hey Blake, i want this kit but i cant get a response from adam or main street cycle?? I was able to reach adam a couple weeks ago and he suggested just doing the weights and primary spring because i run stock tires and mainly trail ride. I just want to get rid of the lag in the throttle. love the videos man!

Nice job guys!!

What do you guys use to remove the fixed sheive pulley. I have this cf moto z 950 that I have to replace the CV housing inner cover.

Yes, great video, I actually have already saved and watched the video Adam does, the only thing is I guess i need to hit him up and see what i need to do the exact thing ya'll are talking about in this video, cuz my 2019 600 is doing the same thing.. its squishy

Will the right side bolts loosen if drive belt has snapped, pully just spins when impact is engaged ??

Bought an 08 Arctic Cat 650 a few years ago with the original CVTech Secondary. Was trying to change the belt. When spreading the sheaves the screw bounced off the metal bushing between them and bent the screw and bushing. Is there a point for the bushing and can I replace it with any metal bushing?

Should i would wait to do a clutch kit on my brand new 2022 600 Touring until the breakin perios is done?

Which clutch setup is better? Airdam or vaunti varrkko?

I have been wanting a quad another one I got 2 Hondas started watching you on the CF Moto this Saturday went and looked at one bought a 600 touring very disappointed on performance until I seen this about clutching and still have hopes for it

Great video, I just bought a cforce 600 and it feels exactly as he was describing. Please link me to a kit I can buy! I've got a garage full of Hondas including a new Talon X4LV. Decided to give cfmoto a try, going from a gearbox to belt drive is such a HUGE difference. I need this cforce to feel a little more responsive. Thanks!

i am trying to change out my belt and i remove the 19mm bolt, then the 30mm nut and washer - problem is that the pulley stays stuck on the shaft. I cannot for the life of me pull it out. any ideas why this is? should i apply some heat?

I have a question I have a 19 uforce 500 Very jumpy off start in high gear Will this new belt fix my problem Thanks for the input awesome video s man

My 2019 CFmoto Cforce 500s (75hours) was stolen and when it was found it wouldnt drive-found the remnants of the belt in the clutch and a weird tapping noise-cleaned it up and reinstalled with new belt but still makes weird nosie and when I put in gear the engine dies-Im guessing both primary/secondary clutches are shot? I think the thief rode the ATV fast in low gear? Is there anything I need to check? Im scared something internally is bad…

UForce 1000, what do you recommend if I want super smooth take off and engagement at lower rpm.Don’t want to loose a lot of top speed, but I don’t off road hard. Just some trail riding on sand from time to time.

great video! how do you keep the clutch from spinning when removing the bolts?

I live in utah home of rockies looking to get kit and what to clock secondary clothing to to make it smoother off start and climb run hills in our neck of woods with out killing all the top end

How can you properly tune your clutches if you can't see your running RPM

I got a 600 I don't like the Is clutch in it to minn rpm to take off what can I do to change that ??

Hi. great review and explanation. i just purchased a 2022 cf moto 600 touring. I am noticing the atv is revving very high at low speed. Its up around 5000 rpm when doing around 20 to 30 kph. Also seems as if the engine is very loud. Is there anyway i can lower the rpms while riding at these speeds. It just seems like the engine is working way to hard at low cruising speed. Any help would be greatly appreciated.

I try to remove primary bolt and nut but my impactor won't do it can you let me know what impacter your using IE touque

very helpful boss

Good video, thanks.

my cforce 600 touring 2021 needed a 18mm and 32mm not 30mm for primary and the weights were made out of alum not steel and only weighted 10 grams each.they filled the hole in the slyers compleaty???

Hi I just changed my drive belt on my cf moto 520l At idle say in park or neutral both clutches were suppose to not spin. When you give it gas they start to spin but my secondary don't stop spinning Can someone explain to me whats suppose to happen?

I have brand new 2022 CFMOTO 1000 atv when going down steep decent engine breaking lets go then its like quad is in neutral and takes off if you touch throttle the slightest it will engage and through you over the bars is there a fix for this

What do you suggest for a 2021 CFORCE 500. All stock. Trail ride and dirt roads?

Will a week primary spring cause belt chatter I have a new belt and secondary I have a trail bloc cvtech primary

Would getting 20 gram weights and a 250/900 primary spring be good for a 2021 cforce 600t on stock tires just want better throttle response and lower the RPMs

That's good information, cvt always have been mysterious for me, I mean, I have changed roller on my atv for having more rpm by taking lighter one, but it look like there is so more we can do to help the motor to give his maximum, I will give a look at his video. BTW I have learned something today, the 600 2020 will be available in France only as the touring version. I don't want a long chassis, so I can forget CF Moto for my future atv, I am a bit sad cause now that outlander or sportsman 570, the only 2 that are interesting for me, not a lot of choice...

On the primary, you mention the washers and to not throw them away. What do they do? My situation is that something was clanging under warranty, so I took it in to the dealer. They fixed the clanging, but now it has a severe lag in engaging on takeoff, and the compression braking engages way too early. Is it possible that the dealer left those washers out and that's causing this problem? It is now out of warranty.

I’ve got a 2018 820le but you guys don’t do a clutch kit for it. Do you think it’s something you might do in the future? I would like one.

I am in utah running stock tires want to get it to engage smooth and set up to climb in mountains on tight trails. Can I get it better re clocking secondary

Awesome video I have a 2020 600 touring and I love it but on one of my trail rides I lost a dust cap on my rear wheel and every where I look even on cfmoto web site all I can find are parts for 2019 and not 2020. So my question is where can I buy parts for this model

Hi, what is the article number of the belt?

I own a 2020 cforce 450l but the fuel consumption is scary at 10l/100kilometres. Whats the rule of thumb that can reduce the fuel consumption?

What is the sweet spot to get the spring/weight right in these cforce 600s? If we wanted to keep it stock, is it possible to just reclock the secondary so it doesnt bog down at 5% throttle?

Is there any chance to 'kill' engine braking on Overland 1000????tnx

My 600 revs way to high in L it hardly moves but revs like crazy how can I fix that ?

Hello bro, how should the roller weight of a cf moto look like? heavier or lighter? Thx

I have a 2019 Z force hwin 1029" tires what can I do to make it pick up and go a little bit better I do a lot of trail riding up hills corners seems to be a little boggy I want more peppier Almost like it's taken off in high gear

Can you not use a socket set ?

Awesome videos availability seems to be only problem with parts during this time

Based on this video, I ordered a 32mm socket for the secondary nut. It turns out that it is actually 36mm! That was a waste of $10!

A question: I found this video because I need to learn more about ATV engines. My problem is that I would like a much more "spongy" engagement of the throttle. On my 850 XC it's really hard to drive very slow and precise. What mods would you recommend then? A harder spring on the primary so it does not close as fast, hence slipping more in the start?

Do you have to take off the primary to take of the secondary clutch ?

Blake question for you what is your thoughts on the dr. Pulley sliders and did you consider them before going with Airdam clutches.

Out of curiosity… how long does it take to change the belt?

Hello everyone , how should the rollers in the variator be heavier or lighter? To have better acceleration and have more climbing power.

Can I get it for my 2018 kymco 700 ATV hunter series

How's it going Blake? Well I tried to contact main street a while back. They never contacted me back about pricing. Kind of dissapointed.

Hi, a year ago I bought a cf moto 600. After driving 600 km, the clutch began to knock. Is it normal in these cvtech clutches?

Hey man could you give me the info on that 600. Tires? Wheels? Lift any other mods

Hi! I have Cforce 450L 2019. and from quad I want more power in high gear when i go uphil. Now in uphil my cforce is loosing power, rpm is the same but speed just drops. I contacted Airdum clutch and Main Street Cycle but no one has responded for last 3 weeks. I would really like to install a kit ( spring and rollers) for primary clutch. Is there some website to order central spring and variomat roller? Can i just re-clock secundary clutch for better performance for drive uphil in high gear? And in what position I need re-clock secondary clutch? Thanks!!

What size socket for the secondary on a cforce 500?

I've been trying to get ahold of Adam for almost 1 month now ... I am trying to get him to do a clutch kit for my mud build! Please tell him to contact me!

Need engineering to figure out how to seal the clutches from water!

Where did u get that standard 6mm bolt. Did it come from clutch cover or in tool kit

I just realized my manual doesn't tell me what the torque spec is for the clutches, anyone know what they have to be torqued to? CVT system on a 2019 cforce 600.

Question,I have a 2020 cforce 600 I've noticed it jerking on take off could it be a belt or clutch problem

Come on Blake you're going to tell me the stages or do I wait till next video?

So reclocked my secondary from B1 to B2 but haven't noticed much of a difference if any. Am I missing something?

How long is the 6mm bolt

Do you know the cluctch position for the 2020 zforce 800ex with 30"tires?

Please, my sir, I have the same engine is working and does not move what solution

Where do I get the bolt that thread in to spread clutch open?

Wanting to send my 950 clutches in for machining but I cant get ahold of Adam to save my life. Email, phone call, FB.. nothing. Big shame.

Does anybody make a big bore kit for the 600?

My 2012 500a has the cvtec

will the belt come off without taking the clutch off?