Chamberlain garage door wont open - blinks/clicks every 5 seconds 

I have the exact same issue. Lightning struck our house and I was trying all kinds of things to hopefully get it working again. But nothing worked. The lights are flashing just like yours. I will go ahead and replace the whole darn thing, even though it’s only 3 years old. Don’t care to mess with it. Thanks a bunch for your excellent video. Told me everything I didn’t want to know but needed to know. 😊👍

Thank you so much for this post. We just had a huge rain storm and feared our garage door opener had given up the ghost. I disconnected the power and battery for about 5 minutes. When I reconnected the battery and power, the garage door opener came back to life like the true champ that it is.

Thank you for this video!! It actually helped me resolve a problem I had with a new installation. I had just installed a brand new Chamberlain, set the travel limits, and when I pressed the wall control, it would not open. It would just blink twice. I spent a couple of hours rechecking wiring, sensor alignments, etc. Then I noticed how you set your travel limits and how you then had to do a test open and close at the end. I did not do the test run when I set the travel limits. Once I saw your video, I decided to reset the travel limits again, did the test open and close at the end, and now everything works! Chamberlains instructions and troubleshooting guide sucks. Their instructions just say set the open limit, set the close limit, the unit will blink twice, and you are done. What morons! I've done several installs, but this was the first time I ran into this. Your video (though it was for something else) helped me out tremendously! I would have assumed I bought a defective unit, would have taken everything down, returned it, installed a new one, and the same thing would have happened again. THANK YOU!!

If you just installed your new Chamberlain system, you need to set the travel limits first. I learned the hard way, because mine didn't come with assembling instructions.

I have a brand new chamberlain garage unit and it simply won't open or close. No motor activity. Sensors in place. Wires in place. The lights activate when remote opener is pressed but no movement.

Dying at the sound track part 🤣

Picked up some good info on the programming, setting door stops, etc, but video is worth watching if only for the Lt. Dangle cameo appearance.

loved the Personality bro 🙂

If your garage door opener is ticking like a clock, it probably just means you need to adjust the sensors. I just adjusted them by hand, they're aligned when the LED light turns green on mine and it worked again.

You gave me a nice morning laugh with the kids clip (just what I needed for Monday)

Your video was very helpful and you made it all look easy for someone like me that's not that handy.

This video was more informative to me than other videos I’ve watched. Thanks

great video.i was on board with the repair until the wall button/panel. think i'll buy a new one....and a surge protector 😆

Love the narrative and video kid comment insert. Well done.

Lol. Love this guy humor. "Being reasonable is not really my thing." I'm probably find so much humour in that because it sounds like me.

Same here. Last chamberlain I buy. Didn't even get hit by lightning.

Mine died after 4 years too. Are these designed to die after 4 years? My home definitely was not hit by lightning.

Awesome helpful video with some good laughs 👍🙌🏼

unexpected letterkenny!! plus 14 points

Thank you I have the up arrow blinking once and down arrow blinking 3 times. Will try your method. Thank you.

so my sensors are okay, but suddenly, the craftsman garage door opener stopped operating, and the yellow LED is slowly blinking, why suggestions? It seems like the control unit that is attached to the wall is not responding, for some reason. Only lights get turned on when you cross the sensor path.

First thing I would do is clean up that unit, that thing is nasty.

Great job man!

Omg thank you so much! This helped me

So my problem is that the remote and manual control works .. when the garage door goes fully down it’ll have a clunk and then reverse back up . Once fully back up another clunk and flashing lights

thanks.

Love 5:10 - 5:15 FEELS

Too funny. Great video

Nice fix. But dude don’t be lazy clean the garage door opener and around the sensors

yuk, clean that thing

Mines.doing the same I'm hoping my battery dead cause shit mines only.two years old

Ball deep…lmao I know that feeling.

aint nobody got time for that....to much work...mine stop working after my brother tried to set it up for myq

RU-vid lied

Would you like to borrow my vacuum cleaner? :)

Thx sexy. Sorry bro. Just saying. Thx for your help.

Lol

A surge protector will not stop lighting! Waste of money!