Thank you. This method looks a lot better than taking the collar off and sewing back on which is a tricky way to do it. Thank you for sharing this and explaining so well.
I have tried several times to reattach that collar into a v neck and u are right it is very tricky and really i couldn't get it to work right maybe this technique will work better..
A 'Bulky Seam Aid' also known as a 'Hump Jumper' , enables the sewing machine foot to glide over the bulky parts of the seam. Then simply remove it from the back of the foot & continue sewing the thinner layers.
I agree, it does. Not everyone will want to spend the care with the hand version. For the sewing machine version it's best to use the exact same color thread as a material and go super slow.
Knits are very tricky on sewing machines. If you don't know what you're doing you will end up with a ragged, puckered, uneven mess and an unwearable shirt. Making this work is going to take a miracle unless you know a few things: 1. Never sew knits with a sharp needle. Change your sewing machine to a BALL POINT needle. Knits look for any excuse to pucker and warp. A sharp pointed needle will go through the threads, pulling the knit in odd directions and not allowing it to settle back into shape. The ball point goes BETWEEN the threads allowing the knit to shape itself without the puckering bulges. 2. The tension of your sewing machine will cause issues. As Tech Angel points out, sewing over the various thicknesses causes her problems. Adjusting the tension will help, but not solve all of them, leading to the next thing; 3. Sewing the edges of knits is tricky. Here you must decide between two options, either change to the zipper presser foot to be able to sew nearer to the edge OR change to a walking presser foot to keep the feed dogs moving evenly over the varying thicknesses. You have to decide whether the even sewing or the edge sewing is more important. Sadly, you can't do both.
Instead of reversing a couple stitches, can you set the stitch length to 0, run the needle up and down a couple times, and then reset the stitch length and start sewing down the edge?
