Тёмный

Change Your Duramax Diesel 3.0L LZ0 Engine Oil & Filter 

LethalGarage
Подписаться 84 тыс.
Просмотров 3 тыс.
50% 1

Today we explore the mighty Duramax Diesel 3.0L LZ0 and find out how much oil she wants. Note: It was more than the 7 advertised quarts
Products Used:
➤ Amsoil 0w-20 Diesel - bit.ly/3W7CbtV
➤ WIX Filter - WL10351 - amzn.to/3QeHnZb
I used 9 quarts during my oil change, one was a flush quart that other was 1 extra to make sure it was on the dip stick after being warm.
Sponsor: Lethal Garage Synthetics!
➤ Use the same AMSOIL oil I trust and save 25%: www.amsoil.com/offers/pc/?zo=...
➤ Lethal Garage Inc. - bit.ly/2BxSCVO
---------------------
Lethal Garage Store! (Support the Channel)
➤ Lethal Garage Store: bit.ly/2rJLrCo
➤ Lethal Garage Flex Fuel Kits - bit.ly/2BxSCVO
Amazon Link:
➤ Support Lethal Garage when you shop Amazon! Use this link to browse and shop: amzn.to/2KHClQr
Codes from Supporting Vendors!
➤ Save 5% on select products via Phastek Performance by using LETHAL5 at checkout - bit.ly/2g7Cmix
➤ Save 5% on all ZL1 Addons parts and accessories with coupon code lethal5 - bit.ly/2gCQBzg
➤ Save 10% on all 6th Gen Gen5DIY Plug and Play Harnesses with coupon code Lethal10 - bit.ly/39vRPo1

Авто/Мото

Опубликовано:

 

5 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 28   
@jonathanw8733
@jonathanw8733 Месяц назад
I wouldn’t worry about flushing the little bit of oil out after it drains. Have a 2021 LM2 with 47k miles and only used amsoil. The oil will be just as black at 500 miles as it is at 6500 when you change it. Diesels are dirty. I will say every few tanks of gas it’s worth it to throw in some amsoil all in one, hot shots edc, or archoil fuel treatment. You’ll notice a difference in how it runs.
@boywonder2799
@boywonder2799 19 часов назад
I agree 100%, I have JT 2020 and change is every 4,000 miles with Amsoil. Im at 87,000K never had issue and engine running great. Im looking to trade it in and upgrade to ZR2 LZO. Question: Like said oil cheap. Is it worth it to change Oil out right after I buy it and replace it with Amsoil. Will this give the seals and break in better minerals and break in then Factory Oil?
@3.0dmax
@3.0dmax 3 месяца назад
The 3.0 takes 7 quarts. You should put 7 quarts in it. An accurate reading = warm, on a level surface, engine off after ~5 minutes to drain down, and then check the stick. A quart over likely isn't going to hurt anything, but it's throwing money away for no reason. Yes, GM overfills a quart at the factory because it uses a bit for about the first 2k miles as the rings seat. The engines get the necessary break-in hours on them before ever seeing a chassis. Take it off the lot, check at 500mi, recheck 1kmi, recheck 2kmi, and then get the free dealer change at 5k. And then EVERY 5k or 20% and no more. Playing the 7500mi or 0% game is dancing with the devil. The tolerances in these things are very tight. Be nice to them and they'll be reliable. And that's not real specific to the 3.0. Pretty much all of these newer engines running these thin oils need the same diligence in maintenance. Doesn't matter if you use Amsoil, Mobil1, etc or the standard ACdelco. Run whatever you want that meets or exceeds Dexos spec and be religious about the proper interval, because both of those things are required for a successful powertrain warranty claim. GM will do everything possible to get out of warranty liability, so keep good records and receipts if you change your own oil.
@Lethalgarage
@Lethalgarage 3 месяца назад
That was done and it needed 8
@heep34987yt
@heep34987yt 6 дней назад
Mine takes 7qts. never had to put 8qts in. Although I did add 1/2 qt. before my last oil change. I buy 8qts..put 7 in and if necessary use the 8th quart to adjust if necessary.
@tomsalt6714
@tomsalt6714 3 месяца назад
Make sure you take DEF fluid with you. I just had an issue with my 2024 ZR2 3.0 and had to stop every 125 miles and add a gal to keep it from shutting down on me. Had to have it reprogrammed when I got back to SLC sensor was not reading correctly. This only happened when I was towing.
@Lethalgarage
@Lethalgarage 3 месяца назад
Odd issue, will keep an eye out.
@Lethalgarage
@Lethalgarage 3 месяца назад
Happy to report no issues
@jylppy63
@jylppy63 3 месяца назад
Wix 👌
@chuckstruck69
@chuckstruck69 3 месяца назад
What does your oil pressure run? Mine only ever runs about 30psi since brand new
@Lethalgarage
@Lethalgarage 3 месяца назад
Idle it looks to be 25psi, and climbs when driving.
@slscamg
@slscamg 2 месяца назад
I have 2 cars now with the variable displacement oil pump. It kills me to see how low of oil pressure it runs at lower RPMs. But what you’re running is the “new normal”
@karlschauff7989
@karlschauff7989 2 месяца назад
@@slscamg The idea is oil flow not pressure. New engines use a thinner oil that flows much faster. The spec for decades and decades was 10 psi for every 1000 RPM. So 25 psi at idle is fine. When the engine is under load or at high RPM, it'll instantly boost oil pressure to between 40 and 60 psi.
@WhiteoutSnowy
@WhiteoutSnowy Месяц назад
Do you know if 2024 Yukon has LZO in it ? Or still got the older one ? I know pickups has the new 305 hp LZO
@Lethalgarage
@Lethalgarage Месяц назад
@@WhiteoutSnowy They replaced the old diesel with the LZO in all models.
@David_Truck
@David_Truck 3 месяца назад
Ive been using oem oil for 3 years. I want to make the switch over to amsoil on my next oil change. Do i need to do an engine flush first or can i just straight up switch it over without problems?
@Lethalgarage
@Lethalgarage 3 месяца назад
Just straight swap
@David_Truck
@David_Truck 3 месяца назад
@@Lethalgarage cool thx
@BabyBang17datruth
@BabyBang17datruth 22 дня назад
I put my truck on ramps so I can get as much of the oil out as possible.
@Chuyennguyen454
@Chuyennguyen454 19 дней назад
Nice truck. Do you have any blow by on lzo?
@Lethalgarage
@Lethalgarage 19 дней назад
@@Chuyennguyen454 I haven’t tracked any to date
@derrickb4130
@derrickb4130 3 месяца назад
Do you have a fuel filter on your Duramax.
@Lethalgarage
@Lethalgarage 3 месяца назад
Like a better one? Currently just the stock filter
@robbynelson3
@robbynelson3 3 месяца назад
Your book tells you to wait a bit for the oil to drain into the pan before checking it.
@Lethalgarage
@Lethalgarage 3 месяца назад
What you didn’t see was 15 minutes of letting the truck sit idle as I mentioned in the video.
@johnlonadier2328
@johnlonadier2328 17 дней назад
Watching your video, you said the truck had been sitting idle for 15 minutes. Is that to say the engine was idling for 15 minutes? The audio in your video sure sounds like the engine is running when you pulled the dipstick out both times and I could see what appeared to be oil vapors coming from, I assume, the dip stick tube. When you put in the oil, the engine noise was not present. According to everything I have ever read and done is to check engine oil when the engine is off and has had time for the oil to drain back down into the oil pan.​@Lethalgarage
@Lethalgarage
@Lethalgarage 17 дней назад
@@johnlonadier2328 the dipstick was checked with and without the engine running. I had checked while running to see the variance during that time.
@Mike-ye1zc
@Mike-ye1zc Месяц назад
tree hair
Далее
кажется, началось
00:45
Просмотров 1,9 млн
3.0L LM2 Duramax: Everything You Need to Know
13:31
Просмотров 286 тыс.
Oil Consumption Issue Finally RESOLVED! 3.0 Duramax LM2
15:51
Does Pre-FILLING The Oil FILTER Cause Engine DAMAGE?
14:03
Common Mistakes On New Diesel Vehicles
16:39
Просмотров 85 тыс.
Why You Should NEVER FLUSH YOUR TRANSMISSION FLUID!!
11:57
МОЩНАЯ ГАЗЕЛЬ
0:23
Просмотров 1,9 млн
1957 Ford Fairlane 500: The Spirit of the '50s
0:28
Просмотров 4,2 млн