Changing a Honda CBR650F Air Filter

Подписаться 116

Просмотров 53 тыс.

50% 1

*WARNING* THIS IS AN AMATEUR VIDEO** Kind of a boring, and certainly amateur video, but I tried. LOL! But, you DON'T have to REMOVE the fairings. I was tired when I made the video, not to mention it was 100 degrees or more outside. (ANY negative comments will be removed).

Опубликовано:

3 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 46

@pinball2002 4 года назад

Watched this video a few times and finally decided to change the air filter myself. Thanks for sharing.

@brianfarrell8590 6 лет назад

alot of work to change a air filter wow great job honda

@abcarterpdx 6 лет назад

Exactly. We did the spark plugs swap on my buddy's CBR650F (yes, we have the same bike). The rail is placed directly under the forward frame bar immediately behind the radiator. Very difficult to access, even AFTER you have completely removed the air-box assembly and the air intake boot and two hoses. Not fun at all.

@abcarterpdx 6 лет назад

I'll be doing a supplemental video for the spark plug change once I get mine ready.

@htuck2 6 лет назад

Mine too. Only way is to pull hard on seat and get 10mm spanner in and undo the central hooks, one each side, takes a bit as slow going. Use a wedge to hold the gap open. Once off, pull back (holding middle of seat) and up hard to get the front of seat out. This should lever the lock free. Locks damaged likely due to someone pulling while locked. No doubt this is old news now but as I did it today, feeling good👍. Ball ache sorted. Removed lock, hammered straight again, back in and working like a dream.

@abcarterpdx 6 лет назад

TOA for life 3 ... The 2016 model they improved that seat lock. Much easier now.

@KeithoSan 5 лет назад

I will be installing a k&n and Power Commander and will be using this video as my guide. Thanks you kind sir!

@abcarterpdx 5 лет назад

Glad I could help.

@KeithoSan 5 лет назад

@@abcarterpdx question, how long did this process take you. Approx 1 hour it seems?

@abcarterpdx 5 лет назад

@@KeithoSan start to finish about 90 minutes. Now that I've gotten used to it, much less time involved.

@KeithoSan 5 лет назад

@@abcarterpdx oh sweet

@MrFurley69 4 года назад

Wouldn't bother me, my cb650f has no fairings lol

@yonutz333 6 лет назад

Nice idea and well explained. I prefer to remove the fairings since with all the stretching i am sure i might break something

@abcarterpdx 6 лет назад

The plastics are actually quite flexible, even with the tabs. They pop out and back in fairly easily.

@javieraragones2320 6 лет назад

Thank you! It was so helpful ^^

@themarvelousvintage76 4 года назад

It's better having cb650f the naked version same engine but when you need do your maintenance it's way easier and faster no need remove fairing.......

@M4L1CE1O1 6 лет назад

What seat is that? Not stock on your model right?...that's about all that's left I want to change for now.

@abcarterpdx 6 лет назад

Mark Jamison, that's the same seat, actually. I just had the foam and material replaced so it's more comfortable. Laam Custom Motorcycle Seats in Redding, CA.

@amitgore 6 лет назад

quite hard work sir. Not an easy job when you have air filter placed so deep inside.

@abcarterpdx 6 лет назад

Honda really did make the air filter access a pain, but now I have it dialed in (after a third opening). LOL!

@gameplayPOL 6 лет назад

Hi, I have a request where can I find a breaker for the direction indicators? I have to replace it with an electric one because I changed the lights to LEDs and they flash quickly. I have CBF650 should have the same electronics. I know that you are ticking near the tank and now I have to undress it or is it enough to take off the plastic bulb? Thanks in advance for the reward.

@abcarterpdx 6 лет назад

gameplayPOL : I recommend taking it to a dealer or professional. I don't do electrical, ever.

@carlfleurant243 7 лет назад

I can’t get the seat off on mine. I have a 2014 cbr650f. I put the key in, and turn it all you hear is a clicking noise but the seat never comes up. I tried to pull it, but it’s kinda hard. Was it hard for yours?

@abcarterpdx 7 лет назад

carl, I used to have a 2014. Yes, very difficult to remove the seat. Don't pull straight up on the seat to release when the key is turned. Give it a good smack,in the center while pulling rearward and it should break free.

@pomajzsolt4363 4 года назад

Are you satisfied with that seat?Comfortable ? :)

@abcarterpdx 4 года назад

Yes. Custom done in Redding, California at Laam Custom Seats.

@pomajzsolt4363 4 года назад

@@abcarterpdx Thanks

@jays8391 6 лет назад

Thank you

@germanshepard7842 6 лет назад

i have a 2014 honda 650f do you know what would cause my idle to not not drop below 2 rpm?

@abcarterpdx 6 лет назад

Sorry about the late reply. Could be a number of things. I know my old 2014 as well as my current 2016 are cold blooded when starting the engine. Could be air flow or O2 reading faulty (sensor is bad or air filter issue), throttle positioning sensor, temperature sensor in engine oil, or something as simple as throttle cable needs replaced. Those are my thoughts.

@germanshepard7842 5 лет назад

i did figure out why my bike was idling high was because the spark plug coil was not fully on.i bought the 2014 manual and it said to check the spark plug in a list of reason why it was idling high. now it idle perfect at 1 rpm. your video gave me confidence that i could fix it myself thanks @@abcarterpdx

@abcarterpdx 5 лет назад

@@germanshepard7842 Glad I could have my video be of some use and inspiration for you. Again, I'm not really a mechanic, but I like to learn as much as I can without getting into something I can't handle. I also like finding alternative solutions (and easier ways) to do things. Merry Christmas.

@17forever64 4 года назад

How many miles did you have on the bike when you changed the filter?

@abcarterpdx 4 года назад

No idea. I clean it about every 2,500.

@17forever64 4 года назад

Andrew Carter ah, ok. I have 2000 miles on my 2014 and I have never done it, I will pull the tank and look at it. Thanks for the video!

@McLovinbtw 5 лет назад

How hard is it to unrestrict a bike like this?

@tobytucker8328 5 лет назад

Good question, I have my bike in parts at the moment. You need to get under the airbox and the throttle stop is there

@abcarterpdx 4 года назад

Missed your message somehow. I'm not a professional mechanic by any means, but I have been told if you remove the catalytic converter box underneath, straight-pipe and put on a custom exhaust, you still have to get the ECU re-programmed for the specs on the adjusted exhausted. The throttle restriction is corrected in that process (that is what I have been told anyway).

@koofdome 4 года назад

How much did the seat cost

@abcarterpdx 4 года назад

$375.

@koofdome 4 года назад

Andrew Carter I want to get a Corbin seat but I don't know if a rear cowl would fit over it then :/

@abcarterpdx 4 года назад

@@koofdome I know nothing about the Corbin seats. If you get a custom fit Corbin single, I'm sure someone makes a cowl to snap on the unused back portion.