Changing Brake pads on a Citroen Dispatch Van

Подписаться 3,5 тыс.

Просмотров 16 тыс.

50% 1

This video is about changing brake pads on a Citroen Dispatch, Citroen Jumpy, Peugeot Export or fiat scudo van
Merchandise shop rich-man-poor.teemill.com
FOR A CHANCE TO WIN A CAR tidd.ly/2ZCf8ct
Brake wind back tool, amzn.to/2DZMUk5
Video shot with tidd.ly/5cc4a52f
Sound recorded with tidd.ly/eb8bcebf
My youtube channel www.richmanpoormotors.com
=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=
If i have helped you and you would like to buy me a beer
paypal.me/RichManPoor
=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=
Awesome if you could show support to my Chanel by watching and SUBSCRIBING to my channel if you haven't already done so.
Monetizing my videos allows me to invest in equipment make more videos
Many thanks for your support, regard Rich Man

Авто/Мото

Опубликовано:

26 сен 2018

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 20

@RichManPoorMotors 5 лет назад

I have a link to a Brake wind back tool in the description , the one in the link dose both left and right hand thread piston wind backs, i also have this tool and would recommend the one in the link. (The one i use in the video is my older one, and only works on push in pistons or right hand thread only)

@astranova67 2 года назад

Do you need to rotate pistons on the rears?

@robmarrin6720 5 лет назад

Don't forget copper grease on back of pad to dissipate heat away from the pad and stops the callipers from sticking to the pad

@RichManPoorMotors 5 лет назад

+Rob Marrin always good practice

@barcusful 2 года назад

Thank you. Is it the same on berlingo van 2004?

@RichManPoorMotors 2 года назад

Peugeot and Citroens are the same, i would presume it would be

@Peugeot308_2.0hdi 2 года назад

Did this car got brake sensors? Drive a citroen disparch 2008 but i found no informations about that and i ordered brake pads with a cable for a sensor…

@RichManPoorMotors 2 года назад

Some may have some may not it depends on the spec supplied by the factory and engine

@Peugeot308_2.0hdi 2 года назад

@@RichManPoorMotors okay thanks, iwill see on saturday when i replace them

@saudade2745 3 года назад

Hi, should I take cap off fluid chamber or push pistons as is?

@RichManPoorMotors 3 года назад

I usually push as is, but I have been told to open cap,

@saudade2745 3 года назад

@@RichManPoorMotors thanks for quick response and video, will pop cap and hopefully sort my brakes at last👍

@RichManPoorMotors 3 года назад

Good luck let us know how you got on

@saudade2745 3 года назад

@@RichManPoorMotors all went well thanks.. was slightly different in that only one bolt holding the caliper at top, bottom was just seated and had single piston. Think it said it was a bendix system but steps were the same as your model. Many thanks

@RichManPoorMotors 3 года назад

Great to hear

@sarah87uk1 5 лет назад

But what is the tool needed, left or right thread ?

@RichManPoorMotors 5 лет назад

+Alex Gordon on the front brakes on this van they are just push back, so either left or right would work as you don’t need to rotate the piston, also you don’t need to reset the computer for brakes change as you do on some vehicles

@sarah87uk1 5 лет назад

So a G clamp would do the job cheers 🍻

@RichManPoorMotors 5 лет назад

+Alex Gordon probably

@robmarrin6720 5 лет назад

@ Alex Gordon Don't forget copper grease on back of each pad to dissipate heat away from the pad and stops the callipers from sticking to the pad they didn't show that