No video :(

Changing Mercedes Conductor Plate on 722.6 Transmission (Fast & Easy) 98'-06' E-C & S Class

Подписаться 15 тыс.

Просмотров 220 тыс.

50% 1

How to easily replace conductor plate Step By Step with torque specs on Mercedes 722.6 Automatic Transmission Models E320, E500, E55AMG, C230, C240, C280, C32 AMG
C320, C350, C36 AMG, & more
Check Fitment for parts but removal and installation are the same.
Models Mercedes Benz 1998-2006 cars and many more.
Torque Specs for Mercedes 722.6 transmission Valve Body, Conductor Plate and oil pan are 8-newton meters, 71 inch pounds or 5.9 Ft Lbs.
Reference Links Below
Service Documentation with torque values and parts descriptions: www.scribd.com...
Parts Link Complete KIT: www.fcpeuro.co...
Conductor plate kit with plug, gasket and transmission oil filter: www.fcpeuro.co...

Опубликовано:

12 ноя 2018

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 291

@patrickrolf482 Месяц назад

It took me a little bit to find this video I ran down a rabbit hole. But this is exactly what I needed for a Porsche 911. The Porsche dealer said they would have to replace the transmission.

@halcook6683 2 года назад

This is the best mechanic video ive seen on youtube. Fast and informative tells you everything you need to know and shows you how to do so in under 5 minutes. Idk about you but i dont always have time to watch someone ramble about a sensor for 15 min

@sasazapadnik9335 4 месяца назад

Agree, i much rather watch a "too fast" video & pause/rewind as needed, instead of too fk'ing slow..

@TireSlayer55 Год назад

Wow, you explained everything really clearly without taking a single second more than was needed, and the camera angles showed exactly what we needed to see. Excellent work.

@Carl-eu6ns Год назад

Doing this right now. Great video. This is a chore working under the car on jack stands at 60 years of age. Your video helps a ton! Thanks so much.

@ksf73237 5 лет назад

This video is too under appreciated. Thanks so much.

@HookItUp 5 лет назад

Thank you, the reason I made it in the first place was I couldn't find a good video on this conductor plate, and all of this footage is actually part of one of my warped perception episodes!. Glad you liked it

@Justin_Kline_223 2 года назад

Right this vid should have a million views 🤣

@GearzCustomsHyderabad 2 года назад

Do we need to do any coding or run a scan after installing the conductor plate?

@breezycovergirl Год назад

Can you fix my conductor plate

@isnowyazn 4 месяца назад

@@GearzCustomsHyderabadNot that I’ve seen… If you have issues after installing quality parts, chances are that you either have mechanical/transmission issues internally, or there’s some other electrical issue going to the conductor plate/connector. Unless it’s an issue that prevents you from getting up to speed or driving normally up AND down through all of the gears; you can find a way to log the transmission data (shifting quality, torque converter lockup, etc.) from the TCU, in live time.

@tcollinsization Год назад

One of the best car repair videos I've seen for a long time, and I'm in stitches thank you . I'm going to try it

@Daniel-lv8ze 4 года назад

Didn't expect to get a tutorial from Warped Perception! Good stuff.

@Jessersadler 2 года назад

thought the same thing. must be his original Chanel

@jasonmateus924 5 лет назад

This video is exactly what I was looking for! Thank you! Love your editing, fast, fun, to the point.

@HookItUp 5 лет назад

Thank you, glad to help

@thabochege4142 9 месяцев назад

@@HookItUpI need this service for my w204

@joecraigslist9467 11 месяцев назад

2001 e320 symptoms were a harsh upshift from 3rd to 4th gear. Transmission code was 110 n2 n3 rpm sensors implausible. Replaced the conductor plate and all is good. The n3 rpm sensor was cracked on the old conductor plate. Thanks for your video.

@skunkwerksadv12 3 года назад

I wish all "how to" videos were this to the point. Well done!

@SW-qr8qe 3 года назад

Totally agree.

@cctool 2 года назад

Sure is nice when people do videos that actually say what torque size and millimeter socket are used. I wish you would have

@deathheadmothman11 4 года назад

Super easy man. Thanks for keeping it straight forward and simple. Can't wait to try this to fix my diesel Benz. It's in limp mode, drives but only in 1st gear. 11 codes come up on obd2 reader. I bet this is the fix. Thanks guys!

@danielaguilar7781 3 года назад

Did it fix your problem? I have the same exact problem

@deathheadmothman11 3 года назад

@@danielaguilar7781 no, took it to a trans shop, he put it on the computer, transmission is fine. It's my ABS control module that is out. When that's out, it will not let you drive out of 1st gear. Couple ways to check is drive in soft soil, and try to engage brakes hard to slide, if ABS Is not felt in the pedal, that's your problem. If you wanna talk more, hit me up. I learned a lot about mine recently. 928-240-3184

@1010109999999 3 года назад

@@deathheadmothman11 brother that's really nice of you to help someone and give them your # but I recommend you deleted it as soon as possible hope you have lots of luck on your car

@papa_hovo 5 лет назад

First video I saw from your channel and I like it .. no bull straight to the point mechanic ..

@HookItUp 5 лет назад

Thank you, I just started uploading again to this channel after a long time of silence. I like to the point

@roberthasted4282 3 года назад

Throws conductor plate and says, " now that I know the old one is bad," lol 😆😂😅🤣 too funny!

@lard1892 Год назад

He doesn't know why its bad...

@LawrenceFS 7 месяцев назад

Best automotive repair video on RU-vid

@jackgorbachev5753 5 лет назад

I can't thank you enough for the torque settings, that's actually all I needed as I just finished my plate, THANK YOU!!

@HookItUp 5 лет назад

your very welcome, thats one of the reasons I uploaded this video, I over-torqued and stretched my bolts the first time i ever changed one of these conductor plates, thanks for the feedback.

@kchilz32 5 лет назад

So who manufacture those conductor plates

@HookItUp 5 лет назад

If you're getting them from FCP Euro then it's the OEM manufacturer for Mercedes. If you're getting them from somewhere else I have no idea.

@eaton3456 4 года назад

Hi great video thanks im having problems with my c200 will drive and reverse but won't change gear !! I have removed my conductor plate as per your video excellent instructions iv ordered a new plate !! My speed sensor did seem a little lose ..but contacts didn't look broken !! How stiff was the speed sensor on your new conductor plate? Im just hopping this is the problem with my car thanks again for video.

@Me-yy5fd 3 года назад

Great instructional video. Thanks for taking the time out of your day to do this. It always amazes me how many whiny, complaining misfits find something negative to say, when someone offers free advice based on their experience, which helps others. When I pulled mine, the solenoids were missing the covers, any suggestions? Thanks again.

@trendntopik240 Год назад

Thank you so much man I just bought. A 2005 E500 sedan and all it needed was a conductor plate

@jl-5188 2 года назад

Best video I've seen so far on this topic - to the point, accurate and complete. My condolences for the finger.

@wes11bravo 4 года назад

Excellent video - well edited and informative. I have the 722.6/NAG1 transmission in my '07 Jeep XK and likely need to do the same repair. Thanks!

@scotttaylor8811 2 года назад

Thanks for the video. You glossed right over how you removed the conductor plate from the valve body. I removed the 3 bolts holding the selenoids in place. That is still not letting go of the valve body.

@johnnyversaci7091 2 года назад

He said those are the bolts that hold it to the valve body so I guess it just comes off after some negotiation

@ikechukwuumekwe1458 2 года назад

Wow.... This video made me feel unbelievably good. Danke schon

@_.ACTIVO Год назад

Life saver

@andrebamboowatts 2 года назад

This is video was awesome 🤩 I’m having this problem with my Benz. I just ordered the parts and hopefully I’ll be back on the road this week. 🥳

@_.ACTIVO Год назад

💯😎💪 you sir is what I would like to call a superhero for the Benz community

@Techfanatic73 3 месяца назад

About to attempt this. Well done sir.....Well done.

@mikeceli 4 года назад

Great video! I especially appreciate learning about a new source, of OE Euro parts!

@blasguris1672 3 года назад

As someone who has dealt with the headache of trying to find affordable, quality parts for Mercedes/VW cars, FCP Euro is by FAR the best place for all European cars period.

@BernonCars Год назад

Beautiful! Gotta do this on my E500. Seems like this'll be no biggie!

@ElegantLife_ 2 года назад

This video ABSOLUTELY made my day!! Great job!

@farhadmalekasghar945 3 года назад

Thank you for the video and I followed your instructions and now my c240 is running much better. Again thank you and I did order the part from the vendor that you recommended.

@whlawson5812 13 дней назад

Hello, how many miles had done by your old conductor plate before changing it out?. Did you replace any other item?. My year 2006 car does not have a shifting problem but has done 130,000 miles. The past owner had changed the transmission oil in 2020. I would like to keep trouble my car until 2030. Regards.

@farhadmalekasghar945 13 дней назад

@@whlawson5812 80k and no just the parts recommended in video and I had to replace the actual shifter too which goes bad too just fyi hope this helps

@marcomarcellotrazzi7680 3 года назад

My best compliments for the video, well done...A question, please, once changed the new conductor plate, and fit all the rest...did you had to make new electronic configuration of the 722.6? Your answer will be appreciated a lot...thanks Ciao Marco

@haroldkoenig9690 Год назад

Warped perception! Thank you for this video, saved my ass!

@RCTPatriot75 5 месяцев назад

When doing this be sure to change the 13 pin adapter (probably in kit). I've found I get around 70,000 miles out of them before they fail causing similar symptoms as conductor plate.

@farerse 4 года назад

nice, now it's ready for a drive on the highway

@RetosRobledo 11 месяцев назад

Does this conductor plate works on my charger 2006 3.5 L?

@hypetekauto 3 года назад

quick and straight to the point! great vid!

@BenzAddiction 2 года назад

Nice ride mate, quick good video too ;)

@tripyramidpictures9224 2 года назад

Thanks! I have a 2005 C320 4 matic, and lately its becoming sluggish or hesitant. Recently the transmission at times wont go past 2nd gear, other times its just fine and can be driven on the freeway etc.

@3OBTPA 4 месяца назад

When I did this to my 2000 w210, I still needed to take it to a shop that had the Mercedes computer system to tell the car it had a new speed sensor.

@LaurentMONFORT 2 месяца назад

hello, thank you for this interesting video, I have the same problem with a box in lame mode and a code P0730.... I changed the plate but still the same....impossible for Mercedes to access the box nor a friend, I'm leaning for the crappy connection below.......thanks again

@b.snoodleman5864 5 лет назад

The speed sensor is designed to have some up and down movement to it. If it was intended to be ridged they would have just simply molded into the plastic frame like everything else is. The reason it is hold on by nothing but the metal leads is so it has some movement. Its wrong to assume that any movement is the cause of it failing because it isn't.

@HookItUp 5 лет назад

Absolutely agree. I was never by any means saying that was the failure here, but that movement is the known cause if speed sensor failure according to Mercedes.

@b.snoodleman5864 5 лет назад

Thanks for the reply, That's good to know. Thanks for the info.@@HookItUp

@Bill-in2fo 3 года назад

Thanks for the input here. I just got mine in the mail and it had play like this. That’s why I came back here today to read the comments.

@johnnyversaci7091 2 года назад

@@HookItUp u did say look how much play it has then threw it on the ground, so definitely seems like u were saying that's the reason it needs replacement

@dannymireles5887 2 года назад

I have a 2006 Mercedes Benz E500 RWD (NON 4MATIC) I was looking at that same kit but mine is a 7 speed transmission, so my question is does it fit ???? It says part may not fit since it says 4MATIC I think what do you think ? Should I just buy it or will it cause my car harm putting that conductor plate?? Any links to the right conductor plate I should be buying ???

@vanbaldwin3829 4 года назад

Excellent tutorial! Thanks

@PanchoVillaGang 2 года назад

Don't U need to pogram it after installed?somehow, my mechanic charged me after replacing Conducter plate...thanks!

@charlenegarden716 2 года назад

How long did it take to remove and replace ????

@NokiaHumanForm Год назад

Wait.. so you're warped perception but u also use the same footages to make Benz repair clips? Lol that's cool af mate

@monspietd.4835 Год назад

The last part threw me off 😂

@peterroempke1841 2 года назад

Nice video. Do you need to programing the car after you change the conductor plate?

@George-nv1ri 6 месяцев назад

Not on 5g only on 7g

@Fkzionism 3 года назад

Much faster! Damn body parts! 😆

@ROSSYDAVIS 4 года назад

I like how he threw the part 😂

@persianchris2451 3 года назад

Damn this is the best video ever... this dude is cool, smart, and straight to the point!! Beer on me

@carlosL-hy6mj 2 года назад

Where is the transmission oil temp sensor on these transmissions

@jackassfat Год назад

What a video!!! Thanks a lot !!!

@dwaynerichardson9778 Год назад

Please tell me where output speed sensor is located on benz 211. Getting a code p0720!!! Please!!!

@alanbaryabbas885 3 года назад

Thank you for a great job

@jeffsgarageinVan 3 года назад

Appreciate the video!

@clarencecheang9073 2 года назад

Whats the symptoms of a failing or failed conductor plate??

@youngace1229 2 года назад

Stuck in 2nd gear shifting hard this happens first and then it doesn't down shift at all rpm just rises can only go up to 40mph

@redbaron2448 3 года назад

The yellow plastic solenoid covers does that help keep out the transmission fluid from the solenois so they don't get oversaturated with fluid?

@oscarsebastian1325 Год назад

I followed this and installed new conductor plate and filled car will fluid and the gear shifter won’t physically shift out of park ? how do u install the shifter rod assembly on the valve body? That the MOST IMPORTANT part of this whole job! ?? Yet I don’t see where u covered that in This video

@darkozmija6849 4 месяца назад

What was the issue before and how to know that your speed sensor is in problem

@srs_lol 2 года назад

Last part had me 😂😂

@JoesGoldenGarage 5 лет назад

Yes! I subbed to ur other channel. Can’t think of it but your friends with Alex and ur German Shepard drinks water.

@HookItUp 4 года назад

Warped Perception!!

@fv4057 24 дня назад

Hello. Do I need a star diagnostic tool after replacing the plate?? Im doing it tomorrow

@JoesGoldenGarage 5 лет назад

Wait a minute. I know that voice from another channel!

@WarpedPerception 4 года назад

Lol... Which channel ?

@350Zquicksilver 4 года назад

Great video! You drove it after all of those repairs, without having to have the TCM reset? I thought it goes into limp mode, 20mph max. Also, I'm confused to why a company would grind off embossed logos on the conductor plate, unless it was a knockoff part.

@350Zquicksilver 4 года назад

I think many people do it for peace of mind. I plan to have mine reset soon, along with getting the fluid level checked. I was told by a wise person on the LX forums, get it reset. My Magnum is currently getting suspension work done, sitting on jack stands.

@kennigen5739 3 года назад

No need to reset the ecu for 722.6 there just some 3-4 fault codes that put you in perma limpmod, that means that you must clear the fault code memory first, normal limp will reset after you switch on/OFF on ignition...

@350Zquicksilver 3 года назад

@@kennigen5739 - I did a few things to the VB, upgrades, 1/2-2/3 new fluid. Dealer reset everything months ago for me, peace of mind. It's been running great!

@boomstick4054 3 года назад

I don’t think the knockoff parts mold will have Mercedes on them. I think it’s either an original NOS Mercedes part, or manufactured with Mercedes tooling… but not actually cast by Mercedes,,, thus a reason to remove the brand.

@jst1261 Год назад

Super tips!!👌👌

@shark70007000 5 месяцев назад

I saw a car listed for sale, where it says the new conductor plate needs to be activated. They claim new transmission, so maybe it's defective? IDK

@rafamercado9225 Год назад

Great video and very easy to follow. Would be possible that code P748 (selenoid 1 failed test) could be cause by a bad conductor plate?

@b.saulius3916 2 года назад

Thank You 4 vid. I wonder, my plate doesent had those yelow covers for solenoids, is that mean it was already opened or just another date manufacturing ?

@albertminasian8780 4 месяца назад

Hello do you have to do any programming after you replace the conductor on the '06 Mercedes?? I bought the whole thing complete revolved body conductor and the solenoids so I'm wondering if I will install that in my vehicle the new one do I need to do any programming?? Thank you 🙏🙏🙏

@julesviolin 5 лет назад

Very helpful. But a tip from me get yourself some Nitrile gloves (light blue here in uk) Oil proof they will last you 10 times longer than the latex you have :) £3 for box of 100

@HookItUp 5 лет назад

Thank you and yes I do use nitrile gloves occasionally. They do last much longer.

@chickenshopbossman5099 6 месяцев назад

Thanks for the video. When changing the conductor plate should I also change the solenoids just to be safe?

@George-nv1ri 6 месяцев назад

No need

@mohammadbelalblogs2017 3 года назад

Hey I really love your details and I wanted to ask what troubles were you having so I can match it with mine

@timpersonett2404 4 года назад

Thank you great vid

@patrick9761 4 года назад

nice

@adrianrivera8425 2 года назад

I want this guy to work on my 430

@MaanALJABRI Год назад

Very nice video 👏, but what about the programming???!!!

@c4r5on88 Год назад

My e320cdi wont drive. Its had a new conductor plate and still nothing in D or R it only revs to 2k in park or neutral it will rev all the way up. It says on the dash what gear I have selected but nothing. It doesn't even try to move. How do I check the amount of fluid in my gearbox and if it was low would it fail to drive

@figlexgonzalez3115 5 лет назад

Hi, what were the symptoms that lead to the replacement of the conductor plate? I have a 2008 E350 4matic and my transmission isn’t working all that perfect. I’d like to see if that car had the same symptoms as mine. Thank you very much in advance.

@anon8613 4 года назад

Change the conducter plate and the torque lockup solinoid

@Menga213 3 года назад

What was your solution? What did you change?

@NVMFOX7SEVEN 3 года назад

Can you tell us what tools you used completely. I’m about to do it to my c320 but I don’t have no tools for this task. Thanks in advance 👍🏽

@lard1892 Год назад

Find another video...most of them explain it better than this warped dude

@Sinister_187 9 месяцев назад

I replaced my Abs ring on left rear axle & car stopped shifting speed sensors read with the multimeter fine u think the conductor plate can be the issue ? Just ordered it car won’t shift

@mohamedsaidsalimalwahaibi147 4 года назад

thank you very much

@wmuszaimiwmuszaimi6378 Год назад

My problem is,the connection pin 7mm skru can't turn out..what should I do?

@crob5955 2 месяца назад

What socket did you use inside the connector

@odoylerules9988 Год назад

Are those seatbelts oem? Great video by the way.

@chrischeveyo6906 Год назад

Nothing could prepare you for the end lol

@Huncho_jn 5 лет назад

So after you put the conductor plate back on you don’t need to erase any codes?

@lard1892 Год назад

Yes you do

@cherrylbrockenberry6292 2 года назад

My ml320 has a leak from the transmission, should I change everything in the kit ? Thank you

@yunusboluk6238 4 года назад

When to change shifting which pozitie P or N?

@dugerwin9627 Год назад

Thanks for your assistance!

@pauljohnson1404 3 года назад

missed a very important step...how did you remove the conductor plate from the valve body?

@GymbalLock 5 лет назад

After replacing it, is a STAR reset required? Nearest MB independent is 30 miles away, so I'd have to drive the car there or have it towed.

@benitocortesmendez2414 2 года назад

Do the celenois covers are nessery to put them back.. Or is okay to reinstall with out it.???

@oscarsebastian1325 Год назад

How do u install the shifter rod on the valve body to the pin ??? what is the secret

@bigthecat1808 2 года назад

Is the valve body and solenoids cleaned up before reinstalling

@elizabethsimone2086 2 года назад

Hey I have a 2002 Benz e320. I was wondering how do I know I’m buying the right solenoid? I have to replace the shift one

@cvsWebDesigns 2 года назад

My ECU is in perma-limp mode OR the plate I installed is bad, does anyone know of a good Diag computer that I can reset the tranny codes and see the actual inputs that may be causing the codes in this car that will also work on others??? ... found a few $3000 that claim to work, but cannot find definite yea or nay. My budget is around $1500 and I would like to be able to remap my Taco, F350 (7.3 Powerstroke) and a Infiniti G35. Autel, TopDon, others?

@DrDrew-mg3ow 2 года назад

Does it have to be programmed or coded once replaced?

@peterroempke1841 2 года назад

Hey! Did you get any answer to your question?

@crookmusik2023 3 года назад

Hello good sir, will this work on a 2002 s500 Mercedes ? Thanks in advance for all your help

@gearheads8494 3 года назад

Would a bad conductor plate stop the car from shifting out of park? *only when cold*

@haroonrana1548 2 года назад

My Mercedes Benz automatic transmission it c 220 cdi 2008 has a problem it drives fine in the Reverse, Neutral Are ok in the gear box but when it is shifted to Drive mode D the car Won't shift 2,3,4,5 gear it shifts only 1st gear it is able to drive .i also changed the gear oil but in vein