Тёмный

Changing the 12-volt electrical power source for LED lights in the Stage Left Audio cargo trailer 

stageleftaudio
Подписаться 38 тыс.
Просмотров 1,5 тыс.
50% 1

Changing the power source for the LED strip-lights in the Stage Left Audio cargo trailer. This change was needed to move the 12-volt primary source of power into the trailer so the vehicle battery would not be needed for the interior LED cargo lights.
IMPORTANT:
This video has nothing to do with audio, but does show a "behind the scenes" view of the overhead with managing equipment that is used with providing audio services.

Опубликовано:

 

11 апр 2023

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 14   
@beckwith5880
@beckwith5880 Год назад
illuminating, sir! always good to have the lights on at night
@stageleftaudio
@stageleftaudio Год назад
Thank you! Always seems like there's not enough light on load-out (which I know you are familiar with!!)
@jimk301
@jimk301 10 месяцев назад
You could always add another baterry in parallel to add capacity.
@abassplayer4life
@abassplayer4life Год назад
Nicely done. Are the trailer lights now solely ran from the battery, no longer getting power from the van?
@stageleftaudio
@stageleftaudio Год назад
Thank you for the comment. Yes, you are correct.
@abassplayer4life
@abassplayer4life Год назад
@@stageleftaudio I was concerned about current flowing from the van to the battery. I figured you had it covered.
@dustinthiessen
@dustinthiessen Год назад
would be nice to rig it up where the battery charges when the van is running
@stageleftaudio
@stageleftaudio Год назад
Indeed!
@dariohart3101
@dariohart3101 Год назад
Hello sir.. is the led still connected to the cargo van battery or only the independent one? If only the independent one, why not connect such a way that while the van is running it charges the 12v battery...
@stageleftaudio
@stageleftaudio Год назад
The LED lighting is now only connected to the independent battery. Good suggestion with charging the trailer battery. First, the amount of current the LED lights draw would mean it may take about 10 hours with the LED lights on before the battery would run out of power. For recharging the battery, I have a small charger that I will connect to the battery. For connecting the trailer battery to the charging system of the van would require a bit more wiring and possibly an upgrade to the existing trailer electrical wiring connections... all of which would be too involved just to charge a battery.
@thill47
@thill47 Год назад
Is it a rechargeable Battery ? they are not cheap.
@stageleftaudio
@stageleftaudio Год назад
Yes it is. It's only a 7 amp/hr. battery (not too expensive).
@gurudattabeura6738
@gurudattabeura6738 Год назад
Hello Sir please Tell Me..All Dbx Speaker Manegement System Have Phase Setting..How To Use In This Feature
@stageleftaudio
@stageleftaudio Год назад
Hello - The dbx units do provide phase. I recommend posting your question to the dbx forum; that is the best place to post questions to get good answers. RU-vid response areas (like the one you are reading from) are not the best places for technical questions. The forums have a lot more users on them.
Далее
Arigato !! 😂
00:11
Просмотров 3,1 млн
Разница подходов
00:59
Просмотров 163 тыс.
HOW TO WIRE LED TRAILER LIGHTS FROM EBAY
10:15
Просмотров 63 тыс.
Adding an amplifier for sub-woofer duty.
8:36
Просмотров 3,8 тыс.
How to Install the Easiest Outdoor Socket
15:22
Просмотров 743 тыс.