Charging and Powering Your Fujifilm Camera

Подписаться 173 тыс.

Просмотров 109 тыс.

50% 1

Charging and powering your Fujifilm camera. This is a complete guide to the options of charging and powering your Fujifilm camera with batteries, USB power banks, and USB-C AC wall adapters. Brought to you by Pal2Tech BACKSTAGE: pal2tech.com/backstage
📔 Table of Contents
0:00 Opening
0:17 Welcome
0:40 Power Option 1: Batteries
1:40 Power Option 2: Vertical Grip
2:23 Power Option 3: USB Power Banks
2:42 Two Basic Kinds of USB
3:01 USB Power Delivery
3:23 Using USB to Charge Fujifilm Batteries
4:10 The Problem with Older USB Power Banks
4:58 Connecting USB Power Delivery to Fujifilm Camera
6:48 Charging Batteries Via Battery Grip and USB Power Bank
7:15 Using a D-Tap Battery
7:47 Power Option 4: Connect Fujifilm to AC Power
8:11 Using 'Dummy Batteries'
9:20 Connecting a USB Power Adapter to Fujifilm
10:59 Connecting Fujifilm Camera to Computer
12:28 Conclusion
🎥 Gear Discussed in Video
BATTERIES
Fujifilm NP-W126S: geni.us/o3lhxO
Fujifilm NP-W235: geni.us/BMNZ9A
Wasabi Power NP-W126: geni.us/y42g82h
Wasabi Power NP-W235: geni.us/i9VYjR4
USB-C POWER BANKS
Anker PowerCore+ 26800mAh PD: geni.us/xRUG
(this Anker 26800 is expensive but great because you ALSO get the wall adapter so you can run camera on AC power)
Anker PowerCore Essential 20000 PD: geni.us/2gz1635
USB-C POWER CABLES
USB-C TO USB-C Cable (for newer Fuji cameras, XT3, XT4, XS10, GFX, etc.): geni.us/OPas
For older models, such as XT2, they use a USB 3/2 cable with a Micro-B connection. Here's a list of some of those cables: geni.us/5WXUT
USB-C AC WALL ADAPTERS
Anker Nano II 45W Charger: geni.us/hHrS0
Various adapters: geni.us/ccCxW
CAMERAS
Fujifilm XT4: geni.us/nJUB4
Fujifilm XT3: geni.us/xbqo5
Fujifilm XT2: geni.us/oDH1ex
Fujifilm GFX 50S: geni.us/mMCMl
Fujifilm X-S10: geni.us/Vw15h4X
🧰 Discounts on Services and Tools
This is one of the best articles I've read on Fuji batteries: domvarney.com/2018/11/22/powe...
Join me at pal2tech BACKSTAGE: pal2tech.com/backstage
Get notified when I release a new video: pal2tech.com/subscribe
RU-vid Gear: kit.co/pal2tech/youtube-studi...
My Current Kit: kit.co/pal2tech
Gear shop: amazon.com/shop/pal2tech
Color Finale Editing Software Plugins: transactions.sendowl.com/stor...
Color Finale LUTS: transactions.sendowl.com/stor...
📺 See These Videos!
Fujifilm Camera Settings: • Fujifilm Camera Settings
Photography: • Photos Missing From SD...
Flash Photography: • Fujifilm Flash Setup w...
Learn Capture One: • Capture One Fujifilm T...
Learn Fujifilm Filmmaking: • Fujifilm Video Tips
ISO: • Fujifilm Dynamic Range...
Lens Reviews: • Lens Reviews
Product Reviews: • FAVORITE Camera Slider...
🎬 Production Notes
Producer and Host: Chris Lee
NOTE: I could not possibly test all the camera models and charging options. If I missed your camera this time around, my apologies!
❤️ Support this Channel:
If you wish to support the channel, there are three ways:
1. Join pal2tech Backstage here: pal2tech.com/backstage
2. Use my PayPal here: www.paypal.me/pal2tech
3. Join this channel here: / @pal2tech
This is very much appreciated. All donations go toward the funding of future videos for this channel.
👥 Contact Info
Business inquiries: chris.lee@pal2tech.com
Instagram: / pal2tech
PRODUCT REVIEW OR TO SEND SOMETHING:
pal2tech
1227 North Peachtree Parkway 165
Peachtree City, GA 30269
United States
NOTE: Product reviews are entirely independent. Some of my links have an affiliate code. If you purchase gear with these links, I will receive a small commission at no additional cost to you. Thank you!
#fujifilm #pal2tech #photography

Наука

Опубликовано:

24 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 233

@pal2tech 2 года назад

NOTE: Remember that you can basically use almost ANY brand of USB power bank or adapter to charge your camera's batteries. You do not need to only purchase the Fujifilm-recommended Anker brand (PowerCore 26800). And if you are shooting nothing but stills, then consider that having USB-C PD (Power Delivery) would not be as important. However, if you want to fully POWER your camera and be able to shoot continuously 4K 60fps video, w/o worrying about draining the internal battery, you do need the higher power delivery USB chargers/adapters, regardless of brand. If you have any model or brand suggestions that work for you, feel free to mention them below in the comments.

@josecolon8143 2 года назад

🤔 Can you, please oh please please, do a video about batteries for Fuji (orig vs third party and which third party battery is best)? Please 🙏🙏🙏

@lettermanian9938 2 года назад

Great video as usual. An fyi for X-H1 owners, I use a Ravpower 26800 powerbank that powers the camera, connected with a micro-b usb to usb-c cable, with great success. That powerbank also has two usb-a ports, so I can power the camera and a dew heater for my lens while doing long astro sessions in colder temps. As a test of the duration, I shot over 5000 images via the interval timer over about 10 hours, with the dew heater connected. The powerbank still had 2 out of 5 charge indicators at the end of it.

@berkdeniz 2 года назад

What about xt4 dummy batteries? I want to use my xt4 without the battery. I was waiting for this video for almost a year and i really would like to know about xt4 power option without having a batttery inside. No typec AC adaptor that i tried could power it just by AC outlet. Is this possible?

@itacatv2146 Год назад

@@berkdeniz he was pretty clear about that. You should rewatch the video.

@jmtphotographymedia Год назад

I have a Fuji XS10. Would I be able to use the camera while charging USB?

@randyk1919 2 года назад

In one video you've addressed literally every unanswered question I've had about powering and charging my X-T3 -- thank you!

@TrailorSailYT 2 года назад

LOL - I was LITERALLY about to order another battery for my XT-3 when this showed up in my feed. As always - thank you.

@barrycohen311 2 года назад

Go Wasabi man!!!!!

@josecolon8143 2 года назад

He covers every base of Fuji cameras. This channel is mandatory to all Fuji users! 🎖

@bernard8267 2 года назад

Thanks you Chris, I now understand where you're catching your energy ! Very good fine tuning about this matter, we never take time into detail about.

@alaputtamchandani9676 8 месяцев назад

Superbly helpful video. Thank you. For anything Fujifilm, this channel is a Godsend.

@dougmapper3306 2 года назад

I have a 2-foot right-angle USB-C cable that I zip-tied to around half of my camera strap. With the cable in the camera you barely notice it's there because it follows the strap exactly until it gets to my shoulder area. After that, it optionally gets plugged into a USB-C extension cable that is coming out of my camera bag or backpack, and that's where the power bank is. It's lightweight, convenient, tangle-free, and I can shoot all day. Basically it's charging the whole time it's hanging around my neck while I'm moving locations, and I don't notice the cable because it's essentially part of the strap. Just make sure you get the right angle USB cable or it sticks out a little far for comfort and you could break it off.

@ijuffj 2 года назад

I woke up and was about to search on how to charge my camera using power bank when I go to a photography walk. And saw your Instagram post. You’re a godsend Chris 😘

@TheOctodread 4 месяца назад

Pal2tech always on point in time of need! Thank you ❤

@anandhuskariahmathew4606 8 месяцев назад

Brilliant, on point, comprehensive, pure information with utmost clarity. Made my life easier, thanks pal

@ErbVideoProductions 2 года назад

6:48 not sure if someone else already pointed this out, but this isn't true for the X-T4. With that camera & battery grip, you can charge all 3 batteries in the camera via USB-C! I've done it myself and it's pretty handy not needing a separate charger.

@SummersSnaps 2 года назад

Good to know.

@mcyavel1 2 года назад

Thank you for this video. I have two battery, and a power bank for my Xt4, and all is perfect!!

@ericzager6548 2 года назад

I got the grip for my X-T3 even though I grumbled about it seeming overpriced, then discovered that it came with the AC adapter that some other camera manufacturers would have charged separately for. So there it was, Fuji over-delivering again! Personally I like the ergonomics of the grip with a heavier lens, or if I know I'll be shooting a lot in portrait orientation. Thanks for another great video!

@stacy85 2 года назад

I was actually just thinking about batteries and power for my Fujifilm cameras this morning. This video was so helpful! Thank you!

@oc2phish07 2 года назад

As always Chris, extremely interesting and very informative video. I really appreciate your work and have learned a lot from you.

@netmustafa Год назад

You have gone over every detail and more about powering and charging. Thanks for the great info, much better and easier to learn and better than trying to figure it out or reading a manual etc.👏👍😊

@adrianlowe2309 2 года назад

Phew! You deserved a tip for that one. Very engaging, informative and comprehensive as usual. Even a bloke from down under can understand it. (Even with a mind that still says ASA) Thanks Chris

@newleaf9501 2 года назад

Am from Aus too.. Loyal subscriber to pal2tech

@hellonader 2 года назад

You rock. Thanks for all your thoughtful videos that get to the point without wasting time.

@pal2tech 2 года назад

Thank you! 🙏

@brkylmz Год назад

Woaw such a great explanation. Thanks man :) You answered all the questions.

@samsen3965 2 года назад

Extremely useful and informative clip. You covered all the bases... Thank you dearly & needless to say, you have a new subscriber with double thumbs ups

@brochg 2 года назад

Thank you for this info, and all of your other great content! I just ordered a few Godox flash units, and a radio trigger for them. Your Godox videos will be a Godsend in getting them set up!

@pal2tech 2 года назад

Thank you!! That's awesome to hear about the Godox units!! I'm thinking about making some more Godox-related info and help videos.

@BradNelson-wg6qi 2 месяца назад

Honestly your videos are the most informative, especially for film user moving to the new digital systems.

@JohnChubbSr 2 года назад

Thank you, Chris! Great information, entertaining, and now I'm energized!!!

@pal2tech 2 года назад

Thanks John!!! 👍

@anthonytriana4209 2 года назад

Truly a mundane subject made interesting and insightful. Thank you for giving a dose of medicine with with a hint of sugar. Please keep up the great content!

@NarendraChennamsetty Год назад

Such an amazingly informative video!!

@jacobyu5050 Год назад

Thank you Chris, you answered all the questions about the power.

@JO-gp7yl 2 года назад

I learn so much from you every time!

@thecuriousroute Месяц назад

Thanks man you are right on point every single time. Proud.🎉 xs20 owner now

@igor.usachev 2 года назад

Thanks! great video! Now it became clear how the charge works from an external source!

@Pasadenahitop 2 года назад

Fab stuff, thank you. Your enthusiasm is infectious. It does wonders for my mojo!

@pal2tech 2 года назад

Yay, thank you!

@catherinelanduyt9593 2 года назад

Thank you so much for this informative video.

@Kit2Canada 2 года назад

Superb info, thank you!

@DieterVanHolder 2 года назад

Very useful and informative! Thank you very much

@garethquigley4769 Год назад

You are the man thanks so much for this I thought my camera was faulty now I know its most likely the weak power supply. I've just subscribed. U legend!!!!!!

@MikeRees1984 2 года назад

Really great video. This is exactly the information I was looking for. Thank you!

@pal2tech 2 года назад

Thank you so much, that's awesome to hear! 🙏

@gnuhapi 2 года назад

Excellent information!

@slobodansaric2843 Год назад

This guy is brilliant…thank you!

@marcosny2010 2 года назад

Hi Chris , Thank you as usual helpful video . Hopping your son Birthday party went well , all the best to you all

@johnnydee7480 2 года назад

Excellent video, thanks Pal.

@pal2tech 2 года назад

You got it Johnny!!! 🙏

@brian_castro 2 года назад

Ironically, I misplaced my xt3’s battery charger when this video came out a few days ago. Thanks for saving my behind that day with this video Chris!

@kennethnielsen3864 2 года назад

You can get fujifilm dummy battery's, they sometimes come with the original fujifilm power adaptor that is used for grips. Thanks for another greate video.

@BenjaminKanarek 2 года назад

Great advice Chris! Thank You!

@pal2tech 2 года назад

Anytime Benjamin!!!! Awesome to see you here!!! 👍

@yogibear5321 5 месяцев назад

Thank you...very informative.👌👌

@PravinChandran1983 Год назад

Thanks for the information, it cleared my doubts to charge Fuji film camera , 👍👏👏

@arirobles6297 Месяц назад

Muchas gracias! Toda la información fue muy clara y de gran ayuda! Thank you!

@varunmahanot5766 2 года назад

thanks for sorting out all my doubts about charging my new X-T200

@maatienko 9 месяцев назад

Thank you, it was useful (recently bought an X-S10 camera) 💛

@FlorianCortese 2 года назад

Thanks, Chris. Have a great adn relaxing! weekend!

@pal2tech 2 года назад

Thanks Florian!!! You too and see ya on Coffee Time on Monday!! Cheers!!

@marcosny2010 2 года назад

Excellent as usual , it help me , Thak you . All the best to you all , hopping your son birthday party went wonderful

@pal2tech 2 года назад

Marcos!!! Thank you so much!!! It was awesome!! 👍

@Nelwyn 2 года назад

I've been using that Anker power bank for over a year now and it's great for all day shooting, just heavy. I keep it in my backpack with the cable poking out to the camera while I'm shooting video on a gimbal. I tried mounting the power bank on the rig, but the added weight is just too much when already holding a gimbal. I think Anker has some smaller ones now that also do PD.

@samlowry123 2 года назад

always brilliant thanks

@AbeLie 8 месяцев назад

VERY helpful! thanks!!

@prateekbhardwaj9943 3 месяца назад

nicely explained

@diogopedro1991 4 месяца назад

Thanks for this video! In my job they have a Fuji X-T30 and I didn't know it could be powered by USB-C. I have the same macbook charging "thing". I will try it. Thanks again from Portugal.

@alexjames421 2 года назад

Thanks for making such a thorough video. I've been wondering why my power bank wasn't working for this - turns out I wasn't using the right USB cable! Fixed thanks to this :-)

@paulgochoa 2 года назад

What cable did you replace it with? Does it need to have a specific feature or something? TYIA!

@alexjames421 2 года назад

@@paulgochoa I found the Anker one it came with (the USB end has Anker indented)

@paulgochoa 2 года назад

@@alexjames421 Ok thank you!

@TungstenOvergaard 2 года назад

13 minutes on how to charge the camera. You’re amazing.

@pal2tech 2 года назад

wait until the sequel: 57 minutes on how to remove the SD card.

@TungstenOvergaard 2 года назад

@@pal2tech then I will enjoy 4 times more 😃 You’re incredible. Have a nice weekend!

@binli3217 Год назад

Thank you very much for making this video. If you're ever in Sydney I'll buy you a beer!

@drofnasw 2 года назад

I LOVE your videos, Chris and have learned a lot by watching them. That said, I think this one covers too much information too quickly! For example, you gave a strong warning about the risk of using some dummy batteries and AC power adapters without either naming a single brand that is unsafe to use or a SPECIFIC recommendation for one that is SAFE TO USE.

@MikeTerra0711 2 года назад

Hi Chris, thank you for the outstanding and informative video. As always great source of inspiration! I would like to ask you a question … For months I have been annoyed by a problem with my X-T3 (about 2 years old) to which I cannot really find any solutions, even on the web. Using a dummy battery to power the cam for a longer time (for video streams) leads to a drained internal battery. The configuration is cleared and starting up the cam again after powering off results in a default setup scenario. In particular, if the camera is stored afterwards without a (np-w126) battery in its battery compartment for quite some time. Trying to "revive" the internal battery (I suppose there is one) by charging the whole camera (with the np-w126 inserted) using an appropriate usb charger, does sometimes help for a short period. After a certain time (sometimes only a few hours) the saved configuration is lost again as soon as you switch the cam off and on again. Do you have any experience with this problem by yourself? Can't find any viable solutions on the internet. Also, I have not yet received any responses about this from Fujifilm support! Maybe some "swarm knowledge" here could help me finding a solution. Thanks a bunch!

@paulgochoa 2 года назад

THANK YOU SO MUCH

@brucesmith9144 2 года назад

Excellent topic and one I was hoping would be discussed. I have noticed that the Fuji X-T30 behaves similarly. However, since the time of X-T30 firmware 1.40 release, certain USB adapters *will not* charge the battery through the USB port on the camera, but the same USB adapter will work with an external battery charger. I further found that the Apple 5 W adapter will charge the battery through the USB port, but its 12 W adapter does not. Upon review of the USB charger specs, the 5 W adapter delivers 5 V @ 1 A whereas the 12 W adapter delivers 5.2 V @ 2.4 A. Note there is a 200 mV difference in the loaded voltage between adapters. This leads me to wonder if the firmware release 1.40 restricts over voltage on the power regulator in the X-T30. I wish to ask Fuji if this is one of the “minor bug fixes” in their recent FW release.

@SummersSnaps 2 года назад

I'd be curious to know what a decent PD USB Powerbank would be recommended for a portable rig set up. Something that is small, compact, not too heavy, a good compromise basically but still gets the job done.

@blackdragonroll 2 года назад

This video is super helpful, thank you. I own an X-S10 and am stuck trying to understand the following message in the USB POWER SETTINGS menu: "Unable to supply power via device with lightning terminal set to off". Is this something to worry about? I noticed when I'm connected via USB power, the screen shows a plug icon, but the battery still drains. Any idea what's going on there?

@astrokeneda 9 месяцев назад

Thank you master Chris, I'm not able to get another spare battery in time for my shoot but alternatively I will be charging in on set via my laptop which is better than having nothing at all ah!

@RachelWhelton 2 года назад

Just got my first ever Fuji camera (XT-4) and the extra battery charger and something is definitely not right; but I can't tell if it's the battery charger, the XT-4 cable, or the XT-4 wall adapter charger. At least your video reassures me that it is OK to get another cable and wall charger so long as they are good brands and supportive of power delivery. I was worried something might go wrong if I used anything except the 5v 3a 20watt suggested in the manual. At this point I've also got a third party external battery charger, which seems to work perfectly (unlike the Fuji version). Just wish I could understand what was going wrong with what. But anyway at least I can go ahead and take some pictures now.

@bluelighthousemedia4538 2 года назад

Great video! A question: is it possible to see the battery level on the LCD display of the X-T4 ? I see it only on the VF... Thanks!

@andrewwhite8762 2 года назад

Thank you. Surprisingly difficult to find information on good battery chargers for the x-t4.

@jacobmunkhammar3775 2 года назад

NB! There are actually two (2!) types of original Fujifilm NP-W126 batteries. With exactly the same form factor! The older NP-W126 and the newer, more powerful NP-W126S. For easy identification, the older is marked with an orange square and the newer with an orange circle. When I use the older version (that I got with my X-E2) in my X-T3, I get a warning at startup and in use the camera is not as responsive. As an example the viewfinder gets laggy and virtually useless in scenarios like motor sports. I even think some high performance functions are disabled. I assume the same may be true when using (some?) third party batteries.

@jorikelferink9437 2 года назад

Hi Chris, I've got a question. I've been looking for a way to charge my X-T4 while connected to my laptop with the USB-C cable. I use it as my webcam during lectures and workshops and enjoy the ease of the Fuji webcam software because it allows me to adjust the lighting when it gets dark outside. As far as I'm aware I'm not able to do that when using the HDMI port, so I'm kind of stuck to the USB-C port to connect it to my computer. However, it still drains the battery, even with the USB power supply setting turned on. I reckon the vertical grip would do a lot, just by adding more batteries. But it's quite expensive. (Aside: my camera is already a bit too high on the tripod and this will add more height again.) I've not found dummy batteries for the X-T4 that I trust to work properly. So I'm a bit stuck. Do you have advice on how to get around this issue? Thanks for the great channel, it helped me a lot already!

@Elizabeth-ev6ep 2 года назад

Great video!!!! I've bought a pd powerbank to power up my fuji xt2 but can't make it to work....please tell me I haven't done a stupid thing buying it thinking that the xt2 is able to be powered and it isn't .....

@petarilic8295 Год назад

Nice and detailed info on btteries and powering Fujifilm cameras. My problem is that I can not externaly power my XT-10 thorough its USB port because when I plug in USB cable camera immediately goes to USB mode and can not be used for shooting. Is there something that should be done in software?

@rodneytopor1846 2 года назад

Very useful, thank you. My local camera store said that I needed to buy a dummy battery *and a "(Tether Tools Case Relay) Camera Power System"* as well as a power bank to provide continuous power to my X-T2. I didn't go ahead because of the cost and complexity. But you say that it's possible to connect the power bank directly to the dummy battery, which would be a simpler, cheaper solution. But I guess the choice of dummy battery is critical...

@gettoana 2 года назад

Just make sure your dummy battery has USB to connect to a power bank

@ACDCdude89 2 года назад

I just got my first ever camera, Fujifilm xe4, and just wondering about charing through a power outlet in the wall. Do I need a special cord/input or anything or can I just use a USB cord I already have?

@Thjfizo 2 года назад

Sorry for my English;) Credits to the Google translator. The video is incredibly comprehensive. Good luck we have the Fuji community with you. I bought a 10000mH PD Anker brand powerbank and it works fine. It is small and I can carry it on top of the camera. For a long shoot it may not be enough. It is true that it does not appear among those recommended by Fuji although I think I have seen it in your video. In Europe we can buy batteries from the Patona brand with a duration very similar to Fuji. Especially the Platinum model. It is true that over time they swell but if you buy from Amazon they give you new units. I really am very scared of the matter. With the Patona battery pack that I mentioned earlier, they delivered a charger for two batteries. Well, with that charger the batteries take a long time to charge and I don't know if that's good. I am also afraid of tethering with the camera when connecting a computer. I guess nothing's wrong but I can't help thinking about it.

@JimSykes 2 года назад

FYI for those considering a dummy battery. There is a small rubber pop-out plug on the battery door that provides an exit point for the dummy battery cable while allowing the battery door to be closed. I've seen some users who are unaware of it and leave the battery door open on their camera when using a dummy battery.

@LXNE77 Год назад

Thank you for explaining all these options. Well done. I got one question regarding power supply (X-T3/T4). Let's assume the camera has a dummy battery but no power source is attached, the camera tether mode is set to fixed and it is set to ON. If now the dummy is connected to a power source does it start up and initiate USB connection automatically? Fujifilm Support told me it would stay in standby mode. Is that correct? Best wishes.

@videos2pick 2 года назад

Thank you so much!

@mannyquinn5841 Год назад

Great facilitator!!! Just one little question: It seems to me that my X=T10 does not have a light indicator on the body to let me know that the USB connection is doing its job.

@oguzhangencturk4985 2 года назад

Thanks for the video, it was very informative. I have a few questions: Does using a powerbank while recording a video cause the camera to heat up? Generally speaking, is there any tricks to stoo the camera from heating up? Thanks in advance

@jonfletcher147 2 года назад

You are da man 😎😀

@legniak1 2 года назад

I use the battery grip when shooting video on my X-T3 but have to use the larger cage. I’m thinking of going to a small cage and just fix a power bank to it. I do like the ergonomics of the grip but don’t like the added size of the larger cage. One worry about using the power bank is the usb-c port isn’t reliable, many users have have their port damaged or just wares out from constant use

@AlainLafleche1 2 года назад

Thanks for this instructive review. Personally, I prefer to charge my batteries outside the camera with the charger ( i have 3 batteries without the grip) . Charging the batteries via USB-C scares me even using the recommanded Anker Power Bank... You never know, a voltage surges can happen and jump the card into your camera. I prefer to play safe :-) Thanks

@vishalbhiwandkar 2 года назад

Good Afternoon sir I have an XT 3 with the grip Currently using 2Newell batteries in the grip and original battery in the grip I have a question. DOES CHARGING THE BATTERY GRIP ALSO CHARGE THE CAMERAS INTERNAL BATTERY AND VICE VEERSA? Please let me know.

@angelicaamora11 2 года назад

THANK YOU FOR THIS I DONT REALLY KNOW WHERE TO STAND WHEN DEALING WITH BATTERY WITH MY XT3

@suvishkahennayake9060 10 месяцев назад

Love your videos really helped me. But my only question is i have Xiaomi mi11 lite charger its 33W Output 5.0V=3.0A and my camera is Fuji X-S10 is it safe to charge my camera with this?

@davidletz9123 2 года назад

Does the USB PD Power Bank charge the battery in camera any faster/slower than the Fuji charger that we plug into the wall socket?

@ScottGeorgeson 2 года назад

Hi Chris, good stuff.. I just bought an Anton battery dtap power supply, but had to by the Dtap dummy battery separatly.. It says on the Dtap cord, output 7.4volts, and the dummy battery saysits for NP-W235, I feel nerviuos to put it in my camera, does the camera take 7.4v or would the dummy battery nock that back to 5 volts..?

@Steinthedude 2 года назад

I would like to see a video about using D-tap with X-T4 cameras! Thought it was not an option so I bought the anker power bank which works fine as well but isn't as easy (and stylish) to put on a rig.

@jackhynes7268 Год назад

Quick question I have a MacBook and a Fujifilm x100 V what kind of cable should I use it to connect to the camera and my MacBook laptop adapter ?

@wonderingfilms1201 2 года назад

Could you tell me what the wall mount thing is at 0:45? The silver plate with plastic trays, it looks really useful, and we're really short of space in the camera room at the office.

@nizarsoffil 10 месяцев назад

can I use PD power bank to fujifilm x-e3? is it still charge when I turned on the camera? thanks

@VUVURECORDS Год назад

I bought a x-e1 without charger, so i could use my smartphone charger directly connected to he camera via micro usb?? great video by the way

@sopranoiua8776 2 года назад

Can the fuji XT20 be charged from powerbank when it is on and during shooting process ?

@nikwestphoto 8 месяцев назад

I have a question regarding powering an XT2 with the Anker PB. I haven't found a cable that will actually power the camera. I tried the link you provided but no luck. Is this possible? Thank you.

@abhishek_paikray 2 года назад

Where can I get the cute little sutter buttons (Yellow and Red) that you use for Fuji XT-4?

@zachedwards1093 2 года назад

Have you heard of any way to power the XT4 with Sony NPF batteries? Andycine has a NPF battery plate with a USB-C PD connection coming out soon -- it claims to be rated for 5V, 2.6A or 9V, 2A in the PD port. I shoot video (including 30-40min interviews) and am looking for a way to supply power for continuous 4k/24fps takes using NPF batteries while also not destroying the camera. Thanks, Zach

@AugustoMaiaPro 2 года назад

Ola. Preciso da sua ajuda. Atualizei o Premiere 2022 e não roda arquivos de video HVEC da Fuji XT3. Arquivos de vídeo HVEC rodam sem problemas. Pode me ajudar ?

@paulgochoa 2 года назад

What kind of USB cable do I need for it to supply sufficient power to the camera? TYIA!

@boblab8097 2 года назад

I hit the like button before intro ends. Every time.

@pal2tech 2 года назад

Awwwwww... thanks Bob!!! 🙏 🙏

@kennethsangill1571 2 года назад

Im using a Samsung PD USB charger that works like a charm to keep the camara on forever when using it as a streaming device. And an Anker PD powerbank when on the move. (X-T3)

@fauland_photography Год назад

Short question: Did you ever use a Smallrig VB-V-mount battery to power your Rig? I am just figuring out how to connect camera (X-H2S) AND Atomos monitor to a Smallrig VB50 battery. I do have a "dummy battery to USB-C" cable and an Atomos "DC-to USB-A" cable. Unfortunately, it's not working with those two. I guess, the Atomos should/could be powered with a "D-TAP to Atomos DC" cable. The camera should be fine with a "W235-dummy to DC" cable (which I would power via the 8V port of the VB50 battery. ... Any thoughts ?

@soynicho 2 года назад

I had a massive problem with third party batteries while Tethering!😓😓 the battery fried, it wont charge again and I think it fried my battery charger too when I tried to charge it! I was a strong believer of third party batteries, but after that ... not anymore, I think even my camera got some damage😓 Thank you for this video! It was awesome!