Тёмный

CHARLIE PRICE VINTAGE SPEED PART 3 HOLLEY 94 REBUILD 

Charles Price
Подписаться 2,1 тыс.
Просмотров 20 тыс.
50% 1

Опубликовано:

 

29 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 18   
2 года назад
THANK YOU SIR FOR THE EDUCATIONAL EXPERIENCE. I FINALLY UNDERSTAND THE REBUILD PROCESS AND ITS LITTLE FLAWS DUE TO NOT KNOWING WHAT I DON'T KNOW AND NOT HAVING YOUR MACHINED PARTS.
@nobuddyimportant2106
@nobuddyimportant2106 Год назад
Thank you for making these videos. Your knowledge is priceless!
@RAK402
@RAK402 Год назад
Outstanding!
@elborrachogrande
@elborrachogrande 4 года назад
After seeing the quality of parts you use in your videos, versus what i got in my rebuild kit, I'm gonna send you my 8BA for a rebuild.
@salazarich
@salazarich 5 лет назад
good information thank you charlie
@ninja63639
@ninja63639 2 года назад
So I got your kit and I'm rebuilding my 94. I pulled the power valve and the retainer clip out for the check ball out but the ball itself is stuck. Any ideas on how to get that out or there?
@charlesprice7897
@charlesprice7897 2 года назад
call me and I will tell you how to remove it 772 778 0809 charlie
@ninja63639
@ninja63639 2 года назад
@@charlesprice7897 I got it out. I have the new one I got from you in. I have the accelerator pump in with the linkage reconnected but the valve only moves down about a quarter of an inch or so before it bottoms out. Does that seem right? I didn't pay attention to how far it moved when I disassembled it
@littlemike101
@littlemike101 3 года назад
Wish I could see more of the conical spring (accelerator return spring) that goes under your pump.........I couldn't see if one side of your spring was bigger than the other. I'm assuming the bigger side goes to the bottom and smaller side goes to the bottom of the pump.
@charlesprice7897
@charlesprice7897 3 года назад
Yes small end up cp
@frekkledipped
@frekkledipped Год назад
items installing are so small some are not visable kind of confusing if your not tuned to the lingo. I need one for the center carb rebuild
@72nortoncommando
@72nortoncommando 4 года назад
Have long and short squirrel nozzles in a box I got from a retired Ford tech..what r the applications for the short versus long?
@charlesprice7897
@charlesprice7897 4 года назад
Sal--- Allways use short nozzles in 94's and all models with the 1 1/4" base bore.. 1 3/8 bore carbs use the long nozzle.
@72nortoncommando
@72nortoncommando 4 года назад
@@charlesprice7897 Thanks for getting back, will be getting in touch at the shop
@scottschmittmusic
@scottschmittmusic 11 месяцев назад
What do i do if i got the wrong power valve that leaks? I have no time to order another one
@charlesprice7897
@charlesprice7897 11 месяцев назад
Turn your pv into a pv plug by filling with epoxy like jb weld and run on jets only . Replace as soon as you can cp
@chrisharris5800
@chrisharris5800 3 года назад
What happened to part 4?
Далее
Cheap Temu Knock Off Holley Carb Review
25:56
Просмотров 95 тыс.
Stromberg 97 vs. Holley 94 carburetors
14:15
Просмотров 14 тыс.
5 golden porting rules - #1
17:17
Просмотров 226 тыс.