Cheap and easy Full Size Bed Frame 

Thank you for posting... My daughter (your wonderful granddaughter) will be loving this bed! You’re the best Pappy a little 5 year old could ever have, and super talented!

My dad and I built two of your Queens 9 years ago. One was for me, one for their guest bedroom. Now one is my sister's and one is my grandma's. They are still tanks. I'm looking to build one for my daughter now, this'll be it. Really appreciate you sharing this design. These beds have kind of become a fixture in my family.

This is a very nice build. To make moving easier, though, I would suggest that instead of using screws to put sides on, you could drill holes and bolt it on. The bolt heads should be more esthetic as well as a bonus.

Aren't you an inch short in length? 81 inch side board minus the 2x4 width (3 1/2 in.) times 2 would make only 74 inches for the mattress. Full size mattress is 75 inches. What am I missing?

Everybody is an expert.... nice frame.

Good Job, I would do some like mods to your design, by adding a 1x4 and 1x6 on the top of the footboard and headboard😁

I built the bed this week and it's perfect for our guest room. Thanks so much for the video!

Very cool design. Actually from dozens Ive seen from 'big' channels this is the easiest/smartest set up Ive found to use a lot of long beams that Ive gotten for free from a construction yard. Time to make a bed! Thank you. God bless.

T Y soooo much

This is an amazing and easy design, at least when you compare it to other tutorials on youtube. Great job!!! ❤❤❤👍

Parabéns muito bem emgenhada muito bonita e elegante forte madeiramento todo igual muito boa De que país vc é aqui só da cidade de santo André são Paulo BRASIL PARABENS gostei muito nota 1000

Thank you Graig, I built my daughter's bed and she loves it. Thank you very much!

Muchas gracias I can't wait to make one just like that .

I will put another 2x2 at the middle

Inspiring cant wait to make one of my own. Thank you for the video!

Nice work ,nothing to complicated

I need the measurements for the queen size please.

Great job sir very well explained

Bronco Fan here

I’m a freshman in high school and I’m building this exact setup. Any tips ?

Great job!!

How much did it cost to make

Do you know the exact measurements of the mattress you used for the frame?

I just finished building the bed frame. I’m please, my teacher is too. Although it’s very important the rail boards are straight

I don’t want the board just the main frame what would i cha he i. the wood measurements

hello, what would be the measurements of the headboard if i didn’t want the top line?

You could placed a board in the middle underneath the slats

There are 2 different sized screws being used. Which ones go where?

Today I finished making this full-sized bedframe. Solid and sturdy as a rock. Followed all board sizes to perfection according to the instructions on this video. Exactly. The only problem is the bedframe is too small and too tight for my new Sealy in a box full sized memory foam mattress. I had to squeeze it into the frame. Won't work for us. A waste of money and much time. What a shame because I really liked this bedframe.

Nice solid bed.

Very nice 👍

Thanks.

Just got on my materials cut and ready to assemble now only thing is that I think you missed one two by four that you need extra for the second half of the cuts

what would you recommend using for paint?

Go Broncos!

I love it!

I love this

Thanks for the video, I was able to make it, but jeesh with lumber being so pricey it cost me 200$, I added a center support and put a 1x6 across headboard and now we have a place to put the TV remote and other little things.

Can you post the cut dimensions in your description please!

Did you end up using 4 - 2x4s? Looking at the layout I'm not sure how 2 of them would leave you enough for the headboard and footboard. Or maybe I'm really bad at math haha.

How much did this project cost to build?

How sturdy is this I want to build one for my son

what would i change if i just wan to make the base without frane

Could you share the lumber and cut list for the queen version? Thank you, Brenda

Thank you so much for showing us your process. I currently have an antique bed that I love, but the side rails have fallen off and I worried that I wasn't going to be able to do anything about it. But after watching your video, I am thinking that it should not be too difficult to make new side boards to fit the current headboard and footboard onto. I am going to thoroughly check out the wood stock that makes up the current sideboards to see if they can be retooled and still be usable as they are really thick and beautiful. Blessings to you always.

ขอบคุณมากครับ…ผมจะทำตามที่คุณบอก ลูกสาวผมคงชอบมาก เพราะผมจะทำให้สุดฝีมือเลย

Didn't this bed end up very heavy?