CHEAP DIGITAL GAUGES FOR YOUR LS SWAP OR ANY NEWER MODEL SWAP WITH AN OBD2 

im reading oil pressure on my 411 pcm had to wire it in and cut it on with hptuners

@@frankmartin5483 Yeah, you can kind of just do whatever. With the right tuning software, these things would be great standalones. Just a custom crank trigger wheel.

Tell me if you know I'm asking the same thing

I know

Yes but if the ecu isn't set up for your rear gear it won't read correctly

@@krustyclassicsgarage oh dang. That I’m not sure of. I don’t think that was something they asked me when they programmed the ECU to cancel vats. To be honest I couldn’t find the connector on the harness. I looked at both the drivers and passengers side harness all the way back to the rear o2 sensors and I didn’t find anything I could plug into the 4l60e VSS. Do you recall which side of the harness I would find it?

@Fahrenheit_Motorsports ya. You typically have to send them a message and ask them to program it in. I never do though. The plug is loomed with the big circular main harness plug that plugs into the side of the transmission

11.00 min in

You just hit connect, then hit dashboard and the gauges pop up.

@@krustyclassicsgarage that's not bad, way cheaper than the Holley! Love that Camaro wrap and the vega wagon!

@@Trikekid84 Thanks. Just posted the first part of the swap on that vega wagon. I don't like it as much anymore now... lol

What are you using now?

Where does the ecm get the temp signal from

@@macdaddy887 the computer

I tried it. It wouldn't stick to the plastic cover over the factory gauge.

@@krustyclassicsgarage dang. I'm gonna think of something. I'll let you know what I find.

Go to user defined pids, and it should give you a "GM" option. Click on it and scroll down.

No as no swap harness has an oil pressure sensor plug as the ecu doesn't need it or use it

@@krustyclassicsgarage do u have a video of hooking up your oil psi? Or can point me to where I would run sensor.

@@knoxbros I run a mechanical gauge to the spot where the factory oil sending unit goes. You just need an adapter which you can get on Amazon then hook up the gauge just like you would on an old school engine

@krustyclassicsgarage thank you so much. I'm not sure why, but I was all confused. lol, I know what I'll be doing this weekend. I'm ready to burn some fuel and do some miles. Thank u again. I just subscribe to your channel. If I do a small video of the installation, Im going to give u a shout-out 🤘🏽

Temple, TX , yes, check the description for contact info

No

MoPar or NoCar built like a Rock!