Cheap DIY Rod Wrapping Jig

Подписаться 1,3 тыс.

Просмотров 141 тыс.

50% 1

This is the follow up video to my "Almost Free" Rod Wrapping Jig, which was based on a cardboard box.
If you're ready for a more functional and permanent rod wrapping jig, this is your ticket!
If you'd like a pdf version of these instructions, as well as links for the "Almost Free" jig, please go to the Thames River Anglers Association website:
www.anglers.org

Опубликовано:

26 фев 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 51

@YL-mc9oz 5 лет назад

VERY NICE PAUL !!!

@jerjbray 4 года назад

I just built the jig. Thank you so much. Not sure if you are a shop teacher, but you should!

@paulnoble684 4 года назад

jeremy bray: Thanks, I'm not a teacher but sure like to help out!

@FishingLouisiana2020 Год назад

I enjoyed the video, looking forward to the next one.

@paulnoble684 Год назад

Fishing Louisiana: Thanks! Been travelling but should be posting some new stuff soon!

@working2bselfsufficient724 4 года назад

Awesome explaining. Only took one trip to the store and had most things laying around. Took me mabee an hour and stain is drying as I type. Beautiful easy rod threader.

@working2bselfsufficient724 4 года назад

Also Lowe's didn't have the moen faucet repair kit in stock but the Delta kit is basically samething and works great invade anyone asks.

@paulnoble684 4 года назад

working2Bselfsufficient: Thanks and hope you have fun building your own rods!

@paulnoble684 4 года назад

@@working2bselfsufficient724 Good tip, thanks!

@working2bselfsufficient724 4 года назад

@@paulnoble684 Thank you for the awesome plans. I'll definitely enjoy making myself some new custom rods.

@theshaxx9040 Год назад

Thank you for this great video

@thankfullife7968 5 лет назад

Haha that’s a pretty slick setup Paul. Tnx very much for sharing!! Do you turn the rod away or towards you with this wrapper ??

@raymondbailey1970 4 года назад

awesome tutorial mate.

@paulnoble684 4 года назад

raymond bailey: Thanks for watching!

@conslin1147 4 года назад

Hey, thank you for investing time to share this...

@paulnoble684 4 года назад

consuelo linares: My pleasure. Happy rod building!

@gjeff7538 5 лет назад

Does the line go through the two collars in order to get the correct friction you need

@danielrochat5968 4 года назад

great tutorial thank you for sharing

@paulnoble684 4 года назад

Daniel Rochat: Kind words Daniel, Thanks!

@matapekangfishing 5 лет назад

Nice job paul....

@manatone5394 3 года назад

Awesome video from Hawaii

@paulnoble684 3 года назад

Mana Tone: Thank you, from Canada!

@5andjiggs Год назад

Thanks alot going to build one, your a great teacher

@paulnoble684 Год назад

Philip little: Thank you for the kind words!

@morongene 4 года назад

this is awesome!

@paulnoble684 4 года назад

Catcherman: Thank you! Happy rod building!

@stevetomlinson7343 3 года назад

Highly recommend NOT SCREWING the Thread Support permanently to the "bed". Rather, install it like the supports so it can slide back and forth along the bed. this allows it to be positioned at optimal positions and be angled such that you can achieve the crossover of thread and have a better thread wrap helix angle, allowing tighter thread wraps.

@paulnoble684 3 года назад

Steve Tomlinson: Totally encourage everyone to hack this design to suit their individual preferences. For me, when turning the blank by hand, it's more comfortable to slide the blank laterally as I wrap it to maintain the optimum angle. Now & then, a wrapped guide interferes with this method and your solution would prevail.

@stevetomlinson7343 3 года назад

@@paulnoble684 yes I understand the sliding thread " carriage" allows the user to EITHER slide the blank or move the the "carrage" or both! And gives you the flexibility of canting the thread as well. But i get it, all personal preference!

@MHFROX Месяц назад

After considering your suggestion to give the thread carriage some travel I agreed and configured mine as such. (Also made a couple other 'personal' tweaks. All in all, great little wrapping/drying (with added motor) jig and much appreciation to Paul for laying it out!)

@mbahjikkdot486 3 года назад

I am like the jop is this, what year the jop ? To Mbah ji Jogjakarta Indonesia.

@Clayshots12 2 года назад

i have just built this and want to confirm that the thread goes between the two countersunk washers, is the thread squeezed between the washers? as I cannot see what causes the tention

@paulnoble684 2 года назад

Graham Allen: You are correct! Some folks pull the thread over the top, between the countersunk washers and that works fine. I like to loop once around the bolt shank, between the washers as I find it more consistent. You adjust the tension by tightening or loosening the wing nut.

@blackfur241 2 года назад

Thank you for these plans I am in the process of making one and just wondering what’s the best finish to use ?

@paulnoble684 2 года назад

blackfur2: Finishing the wood opens up the possibility of that finish transferring to your fingers and contaminating the threadwork so I leave it unfinished.

@blackfur241 2 года назад

@@paulnoble684 perfect 👍 . So there is a reason I sanded it all the way back to 800 grit 😆 thank you again

@christopherjenkins6154 4 года назад

Great video but can't seem to get pdf instructions

@paulnoble684 4 года назад

Christopher Jenkins: Try www.anglers.org/ again. I've put links for both of the DIY rod jigs on the "Home" page until May 2020 - after that you'll find them on the "Past Events" page of the same website.

@MHFROX Месяц назад

@@paulnoble684 I had the same issue finding (or NOT finding) the pdf version...got it now tho! Incidentally, awesome step by step 'How To' presentation! Thanx!

@simpleplan3264 4 года назад

sangat detail. 👍👍

@paulnoble684 4 года назад

Simple Plan: Thank you for watching and hope you find rod building as enjoyable as I do!

@willianfanciscobrazalvesfr1940 4 года назад

👍🏻🤝🏼

@sangpengembarafishing0711 4 года назад

Like my friends

@paulnoble684 4 года назад

sangpengembara fishing: Yes, there's a lot of designs out there that share the same basic elements. I just decided to share my own take on it using easily available components.