Superb video. I have to appreciate the efforts taken to make such video with background audio. Actually your video speaks for itself. You are highly skilled man.
@@dailyhandsdiy Do you have any workshop? If yes, please share contact details. If not, can you suggest a good and trustworthy workshop/mechanic ok in Bangalore.
I don't run a commercial workshop, just does if someone comes with an issue. Its in Kerala. Im sry mate, i dont know much about workshops in Bangalore.
Hello sr. i've got a ford figo 2015 and i've got a faulty code p1934 related to speed sensor but the scanner does show which tires is faulty. The car goes limp mode once and awhile. Are the front tires responsible for the speed sensor like you showed in this video? good video though!!
Hi pls do get the live data from each wheels. Modern scanners can do that. if a sensor is bad you will get deviations in that data. Next thing would be a fault in wiring or connectors. Also do check of the car is equipped with vehicle speed sensor in the transmission.if yes that might give you this fault.
Hi my car has a problem when I press the accelerater pedal it shut down, I replaced the MAF and checked timing however the problem persists what could be the problem I do get the ABS light sometimes it is a Ford figo tdci
Hi there, ford does limit power when abs fails but wont stall or shuts down. Pls do check the fuel status of the car ie, fuel filter, fuel pressure ranges and also injector performance too.Also check the air filter.
I was drifting on ice and somehow i ripped the abs cable, speedometer not working, no power sterring, no ESC, engine light on, rough idling, no acceleration and strong vibrations while accelerating, happily i was able to fix it myself. Thanks for the video!
Thanks for the comment. just a quick question, after you changed the cable, was there any change to your speedo, power steering, and acceleration. Also did the lights turn off?
Hi there, Din understand wht just said, but when you replace the sensor be sure to check the rubber seal inside the connector. Have seen many cases,these seal wear n water gets inside damaging the sensor.
P1039 FORD Vehicle Speed Signal Missing or Improper I think speedsensor not good buth i have a mondeo duratec and this car have no speedsensor on the gearbox of speedsensor abs not good why i have nou faulf from abs
Que la paix soit sur vous, j’ai un problème avec le compteur de vitesse une fois qu’il sert une fois Makemesh ou Lavishaj Cadran Coulommètres ou Cadran Mazout Kishvio Kelio Ford Fiesta modèle 2007 Mazut
Hello my Ford Fusion 2008 the tyres in the front stays bent changed the suspension lower arms struts everything still the problem persists and abs and handbrake light stays on.... Can you help?
Bent? am not sure what you are saying...did you mean extream camber angle. abs n brake light flashes if brake fluid is bad or nearly empty or the abs sensor or coded ring goes bad.
Hello sir Left front wheel speed sensor Left rear wheel speed sensor Right rear wheel speed sensor Control module u300049-AB U3000:49 Battery voltage What is the main problem?
For the module or for sensor...for sensor i guess its around $100 for a piece. You can even get an aftermarket at lower prices from ebay. If module, its roughly said amount
Tengo un Ford focus 2007 dos puertas, las llantas delanteras están frenadas, el mecánico me dice que debo cambiar el dispositivo a donde va conectado el sensor abs de la llanta. Espero haberme explicado
Hi just came across your channel and would like to say thanks for posting your videos, I have learnt so much about job's that need doing on my Ford Fusion tdci, great content 👍👍
Hi, nicely explained , my Fiesta's front sensors are faulty, both left and right, I get a brake warning apart from the abs warning in the dashboard, does this anyway limit the vehicle acceleration or top speed ?
My car was TATA VISTA TECH VX 2015 MODEL. I feel vibration and steering wheel shaking while hard braking in my car. (Breaking in 80-90 kmh speed). WHAT WILL BE THE PROBLEM? In addition, 1. At the spped of 130-140 kmh, steering wheel shakes. Clearly iam feeling the shake. The shake starts at the speed 120kmh only. 2. Having brand new Neo alloy wheel and michelin Tyre (85% button). These setup in all wheels. Share ur ideas bro?
The one when braking is because of warped up brakes, disks need resurfacing. And the one when speeds abve 120 is not balanced wheels, needs a proper wheel balancing.
@@dailyhandsdiy Thank u for the reply bro and for ur valuable time. Warping, can't able to understand. Could u please explain it bro. Did i need any cleaning of breaks... Frontwheel disks and Backwheel Drums. Kindly explain bro. My car was done only 34,890 kms only. Me the 1st owner. Very rare use only.
Sure bro, warping means, when disks heats up certain times the metal deforms and forms bumpy and super polished surface in some areas of rotor or disk. This can happen any time. So, when we brake it slips on affectd area and grabs on other area. This cause vibration on brake pedal and steering. Resurfacing will chip away the top layer of disk and makes it like new.
@@dailyhandsdiy Thank u Bro. Did u have done this to ur car? Any videos h having bro, to do it by ourselves. If so share the link bro. Tq. I said to clean the breaks last oil service time. The company charged 800 for break cleaning...
Its not brake cleaning bro, its resurfacing. Its actually not something we can do at home. Need a lathe to do the job. I have done this but you need to remove the rotor and give it to a lathe to get it done.
A snapped wire can be fixed. Just strip the wires, slide in a heat shrink, tie the wires and close the repair by heat shrink.For better sealing use some silicon sealant on the repair and heat shrink it. will be waterproof
