Thanks man!! I still miss my Sonoma but it's so nice having a much newer truck too if I want to go out of state I can just go at the drop of the hat lol!
41.25 inches from ground to bottom half of flare in dead center of wheel well. And yes a 2,inch leveling in front and 1, inch shakle in rear that's really not necessary pluse the 1.25 body lift, I'm running 285 70 17 BFGoodrich KM3's they were rubbing on full lock before the body lift. Mostly because Im running 1.5 spacers to give it a wider stance. At some point I want to do a bison type flare. This was the cheapest route to gane a nice lift without spending 2,200 on BDS 4 inch. Also recommend a diff drop for leaving kits greater than 1.25inch.
@@waltersteffensthezr2man431 oh ok that's good to know. I have been trying to figure out if the 2021 and up model is higher from factory then the older models and from what you just told me is that the 2021 is 1 1/4 higher from factory. mine is a 2021 and I put a 2-inch level kit on it from Truxxx and I am at 41 inches. thanks, I look forward to seeing what else you do too and with your zr2
@@jeffreyjohnston6843 no kidding?? I'll be dang yep I just went and measured I'm at 41.25 that's with the 2-inch level and 32.8 tires and a 1.25 body. I'm jealous I had no idea!
@@waltersteffensthezr2man431 I am now trying to find out if a BDS 4-inch lift takes it up 4 inches more then it comes factory or is it really just 2 inches more than factory. I had been trying to find out about the height since I watched a video of Mattys garage where he put a 6-inch lift on a reg Colorado and gave a height to the top of his roof and the measurement was the same as mine I couldn't get him to measure his fender though. Some of the guys with the BDS lift have the cut-out fender flairs so the measurement won't work. Your trucks paint still looks now I hope to keep mine in new condition like yours as long as possible.
