Step-by-step guide on how to remove / replace front left side door panel trim and / or inner door handle on a Chevrolet Tahoe ( 2007 | 2008 | 2009 | 2010 | 2011 | 2012 | 2013 | 2014 | PPV | SSV | LS | LT | LTZ ).
Wondering how to fix Tahoe door handle? Just replace the complete panel.
One of the most common things on Chevrolet Tahoe is problem with the driver door panel. The plastic underneath it cracks from usage and then the complete door panel has to be replaced. Since I did this multiple times, I made this door panel removal video.
If you are replacing the inner door handle, don't try just to pry it out because you will break it. There are two 7mm screws holding in on the reverse side of the door panel. Only way to safely change the inner door handle is to completely remove the panel.
To remove the panel, there are three screws holding it. Also a few plastic pieces will have to be removed and than the panel can be pried out. Watch the video for the exact instructions.
If this video was helpful, don't forget to Like it / SUBSCRIBE to the channel!
⚠ DISCLAIMER:
While QuiteAlright strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. The videos are intended for information only. Follow the manufactures repair procedure and use appropriate safety procedures. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. QuiteAlright is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
6 сен 2024
