Chill Build Volume 35: Sama IM01 Pro (C-Type)

Подписаться 1,5 тыс.

Просмотров 7 тыс.

50% 1

********Correction! - The GPU RGB does not need to be controlled by the 3-pin header. I read this online, and accepted it, but it's not true. ASRock Polychrome would not detect the GPU at first. The GPU needed ASRock's Tweak software to be installed before I installed the ASRock Polychrome software so it could perform a firmware update on the card, and then RGB starter working. At least, that's the best explanation I could give after fiddling with it for hours.
Most cases that try to be versatile end up sacrificing too much in quality for features that will probably never be used. SAMA actually did pretty well with this case. It's larger than the original, but it's solid and looks good.
Link to the Chill Unbuild (teardown/unboxing) - • Chill Unbuild: SAMA IM...
SAMA IM01 PRO - amzn.to/3QZTPNl
Specs:
Ryzen 7 7800X3D - amzn.to/3FZP3Ji
32GB DDR5 6000 CL36 Trident Z5 Neo - amzn.to/3QYzzvm
Scythe Fuma 3 Heat Sink - amzn.to/3QWT9bs
Gigabyte B650M Aorus Elite AX - amzn.to/3QYE9tD
ASRock RX 7900 XTX Phantom Gaming 24GB - amzn.to/46d3R1N
Samsung 980 Pro 1TB - amzn.to/3QYE9tD
4TB NVMe SSD - Just pick a recent one.
Seasonic GM-850 Power Supply - amzn.to/3SBcL69
Thanks for watching everyone. Please try to use my amazon links (amzn.to/3QHeUuv) if you end up buying any parts and make sure to consider supporting your local charities, churches, and organizations that help the less fortunate in your area.
Peace!

Опубликовано:

17 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 24

@ChillBuilds 10 месяцев назад

@Benzin0 Месяц назад

This is the best video of an actual build in the Sama IM01 Pro. Great work!

@theOGkuma 11 месяцев назад

thank you for doing this build. that case has been on my amazon wishlist for some time now. I was mainly curious how that case extension piece works. I won't be using it for my build. thanks again.

@chi_Tachi 6 месяцев назад

I just ordered this case and appreciate the build video so I can plan ahead. I’m thinking about ordering a long right angle PSU cable (maybe 6-10ft) and running it thru the cable channel out the back to eliminate the hanging extension.

@Megaman-Zero-626 10 месяцев назад

Nice, I currently have the same GPU in my 5800X3D mini-ITX build inside this case, replaced the stock fans on my Thermalright PA120 with the fans you used for case fans! Thanks for posting!

@madalinn321 11 месяцев назад

Hello ! I have the original IM-01 case, and was wondering why you used the extesion for the bottom fans. Sama says its optional for AIO mouting at the top. In the orignal case it fit 2 fans under the GPU just fine. Can you opt out of using the extension ?

@ronalcasid3844 Месяц назад

Is the extension required to mount bottom fans?

@acxel7905 2 месяца назад

im building this in few days. Please please tell me if I need to buy like cable extender or im good with just the parts and case. Also How many fans should I get?? HELPPP

@ChillBuilds 2 месяца назад

I recommend watching this video - ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-lPsGpFt9muY.html&lc=UgxRME3haw4ZQTubWhB4AaABAg

@matcharen Месяц назад

@@ChillBuilds u linked to the vid on the same thing here

@stancartmankenny 11 месяцев назад

What is the longest psu that will fit in this case if you also have a long gpu? Do you know if you put that extra compartment at the top instead of the bottom, if that would allow for a longer psu?

@ChillBuilds 11 месяцев назад

The length of PSU you can use depends on how long your GPU is. The extension does not move the PSU mount, so you can't move it up. I recommend looking at the newegg product page or the Chill Unbuild video to see how things are connected.

@Draaghail 10 месяцев назад

Badass build, is there really a noticable coil whine from the motherboard like some owners say on the internet? Edit: Can it be built inverted while keeping the front panel with its IO in default position?

@ChillBuilds 10 месяцев назад

With my config, I haven't noticed any over the case fans.I've seen those reviews too, so I was concerned. It's possible that the issue isn't widespread, or possible that I just got lucky.

@Draaghail 10 месяцев назад

@@ChillBuilds Thanks for reply. Are you able to answer my other question?

@NikolaiSyrota 10 месяцев назад

Can't wait to see this case in EU

@ronaldmcdo5516 5 месяцев назад

NOICE build 👍

@ducvu2822 4 месяца назад

is your psu a non modular psu?

@ChillBuilds 4 месяца назад

If you look in the description, I listed the parts that I used.

@u2msnake 9 месяцев назад

u have such manly hands 😮

@LCJammer 10 месяцев назад

power extension cable just hanging like that is so jank lol. also, shame on the ugly sama logo which was not there in the listings in retail pictures.

@ChillBuilds 10 месяцев назад

Jank? I don't think so. The other option was to run it over those fans. I didn't want it to accidentally touch them and start making noise, so I kept it all bunched up near the PSU body.

@LCJammer 10 месяцев назад

@ChillBuilds oh no, you misunderstood me. the case looks like it's been designed that way to hang out the side instead of screwing into the case like the nr200. i was considering this case until i saw how silly it looks 😅.