CHISEL RESTORATION: HOW TO BRING RUSTY TOOLS BACK TO LIFE!!! 

Was so happy to see a new Samurai posting. Good vid, loved the chisel! Stoked to hear what else is coming :)

Hello Samourai, that line is the quench line from the hardening process!! (it shows up with the acid). For the rust some straight 7% vinaigre works just as well (takes a little longer though!! Love the process, i wish i could get (make) myself a benchtop belt sander!!

Wow, very nice job samurai.

That line would not be from being stored in a bucket. That is the heat treated line from hardening. Beautiful sharp.

Now that was a peaceful video - thanks, Jessie - your Makers Mob group and Facebook group are friggin’ fantastic. I get so much out of it and a great group of people!

Shows how you love your work ... doing what you love is ultimate.

HA. was already loving the video, BUT when the chisel started talking I loved it more

That line is the quench line I believe. Thanks for the video brother.

about 18 years ago i bought an Ohio tool works Slick for 10 buckscat a garage sale . i wouldn't sell it for $500 bucks now . i like it better than my newer sorby slicks as far as holding an edge and ease of sharpening . When its freshly sharp , its REALLY SHARP ! like surgical sharp . It cuts White or Red Oak , Locust , Bull pine , or Cypress like butter . i bought a big set of Old Buck Brothers chisels , cleaned them up and rehandled them in rosewood similar to a Diamic or Marples pattern handle profile and i used them a Lot . Same performance as the ohio slick versus newer tools . So i still keep them well oiled and sharpened in rust paper and a canvas tool bag when i need em . along with the usual framing tools , saws , etc . Makes it a lot easier for me to just grab the 2 bags of tools i keep ready for just about any job i wanna mess with .

Classic Samurai. Thanks for the video.

There are few things as satisfying as restoring a tool to it's former glory, love, love ,love

Awesome, thank you sharing it with us.

Thankyou Jesse,awesome job.

Really nice job. Glad to see you did not completely sand or grind away the natural finish. The age always look the best!

What a great vid just made me smile watching you bring that baby back to life

great vid Samurai. soooo funny when the chisel spoke lolllll

Love the chisel talk

So nice to see this video! A truly sharp tool is a blessing to use. thank you for saving this neglected tool

A talking chisel ... that really made my day. Cheers!!

Beautiful work! 😊👍

Great video, nice calm music and what a finish on that chisel fantastic!

Marvelous job. Bravo.

Excited for the new videos!

thanks for the free plans

Well done, nice firmer! 👏👏👏

I thought this was a family friendly channel The way that bade shaved that wood was definitely considered porn

Nicely done!

Great to see another video years have gone by and still watch your videos be great to visit sometime and help out

Awesome video bud

Love your vids. You’re a good man. Huge fan.

Yet another great job 👌🏼

That's some seriously ASMR chiselling right there!

Great job!

It's always nice to see an weathered tool brought back to life, nice video! A really cheap and effective way to remove and convert rust is to use milkstone cleaner sold at places like Tractor supply. It comes in an orange liquid and is used to clean dairy tanks and piping etc. You can get a gallon for about $12 and it's composed of about 55% phosphoric acid; dilute it 1 part acid to 3 parts water. It converts rust to a black oxide that stops the formation of rust and seems to help the tool hold on to protective oils better, all while giving it a nice gun metal color. Cheers!

Nice, real nice !

what a little of TLC makes the difference!! good job!!

Good to see you back doing proper vids

Honestly I wasn't too excited about watching this video, I'll probably never being doing this, but it popped up, I watched it, and was so amazed as you finished up and actually said wow aloud when you made your first cut with it. Wow.

Daaaammm dude u got that so sharp awesome job.

Love You Man! Great video

Ottimo lavoro, come sempre. Un saluto dall'Italia.

Wow. You seems to be a good teacher👍

I dig it.

Great job

it's a thing of beauty!

Been a while since I've seen one of your videos, love your stuff bro.

What a satisfaction to watch...

a chisel has been restored by you. you do very well

That dark ring is where its hardended

Very good restoration bro 👍👍👍👍

Who doesn’t want to just be sharp and shiny?? Nice vid, thanks for posting.

Like the Hawaii T-shirt . And the chisel .

Why would anyone dislike this video? He's repaying a friend by making his tool nice and useable again. That should speak volumes!

Love the ending :)

Dam thats a good looking chisel

ok, ok, ok, i get it...you got me..im hooked! subscription and a definite like

Millennial Chisel.....lmao. Good one! I use EvapoRust for all of my restorations, which is a hobby of mine. I have a bunch of old chisels I was given and I'm watching this specifically for them. Thanks!

You make a very good video. I would like to see a glimpse of the flat side, the real cutting edge side of the chisel after you've polished it, even if you think it's boring. I will find it instructive. Thanks, to you, Young Sensei.

Oh man that is, Slick. Did I just say that? As always, nice job.

Nice job great to see a tool being brought back to life and put back in to service 🤪😂

I like the before and after of how the chisel cut

Hahahaha the talking chisel at the end got me good 😂

I was just about to leave the video when the chisel started talking. I laughed so hard that my head hurt.

Great ending. See you in ottawa!

How can anyone down vote this video. Excellent work

I bet it wasn't sitting in bucket, what it is showing is where hardened part of steal ends - carbon is visible od surface as metal is eaten by acid :)

Güzel bir çalışmaydı 🇹🇷 🙏

I need some chisels like that.

Nice one! Something about old rusty tools beeing restored to former glory makes me feel all fuzzy.. 🙃

good to see you agian and nice job on the chisel. you should start to upload more easy jobs like this. just to get someting out for os. who is keep waiting for week just to see you agian

That line is the hardening line where the softer metal meets the hard.

He beats me😂😂good one

Nice job bro kaboooooom

"i kinda just wanna be sharp and shiny..." omg. lol.

One of my best framing chisels came to me snapped clean off from someone using it as a pry bar

Wow look at that fine tool. The chisel is pretty bad ass too. I sharpen all my own as well. Can i have that one? Lol

Wow. Wish you posted more useful content like this, I miss the old samurai

My first set of proper framing chisels were RS's. still got em but Quentin Barr made the ones I use every day but fine work is done with THW's or Nagashima.

Pure persistence, hardwork and reward. Great job, attention to detail - as usual. Geat to see you back on RU-vid

Fantastic 👍🏼👍🏼👍🏼👍🏼🌺

9:18 damn!

lost it when you started talking to the chisel. A few weeks ago I was making stair stringers with a friend, he over cut with the circular saw. I said "now I'll never be a teen model". he said there was something very wrong with me lol

Cute!

Wait, I thought u only use chisels to shave hair off your arms..... at least that’s what I’ve used to seeing lol was refreshing to see one being used on wood

Missed u bro

Froglube is very good at preventing rust 👍

Great video. I admire/covet that lapping/sharpening station you've set up! I've got my Tormek 10" slow water-bath wheel, including an extra 2000 grit wheel to finish my edges, but I still need a lapping rig like yours... Mark me down as subscribed!

Who needs power tools with chisels that sharp

that line that you thought was made by it being stored in a bucket is actually the differential hardness line revealed by your de-rusting liquid

Sweeeeet! Howya doin' Jesse? Blessings to you and your family.

Can I ask you what type/ kind/brand of wood finish you used for your deck please? Thank you rock! God bless

i will put this video in my favorit list, very interesting!

I just cleaned up a very rusted tool by soaking in white vinegar overnight. A much gentler form of acid.

Awesome video would that same treatment work on files I have like three or four old rusted files

Hi. Thanks for sharing this great work. Would you please specify the materials you used to protect the metal and the wood. Thanks

Beautiful. i love it !!!! It was so relaxing to watch this video

"What are you? A millennial chisel"? LOL!

Electrolysis works well on rusty parts.

nice job i found a 1920 hand plane you inspires to restore it

I just use cheap vinegar ( any sort) for initial rust removal, just soak for a day or so then wire wool. Seems to work OK for me and costs virtually nothing!