Hi M-Vave channel - I ust got this controller and I can't seem to connect it to my windows 10 PC. There is a USB-Midi device that is recognized (I double checked my USB C cable and it's a data cable) but this device is not working (STATUS_DEVICE_DATA_ERROR). Is there a specific driver I can use? I can connect to it via bluetooth on my cellphone and I checked the firmware which is the latest available.
The Chocolate kinda works with Korg DS-1H pedal but not in a useful way - its TRS readout range only translates to a CC value range between 124-or-125 (open) and 127 (fully pressed). Please add a *calibration* interface to improve support for different pedals, and make this good product even better! Thanks
How can I increase the wireless range of the Chocolate Switch? 3-4 meters from the computer, the connection often drops. The same is true if I use a MidiB USB receiver - at this time I compared MidiA, the range is three times better. I think the problem is in the iron casing.
Hello. Can I control VST plugins with a Chocolate #1 device, and use another Chocolate #2 at the same time for DAW functions (for ex. play,record,stop)? Will they not conflict with each other?
Hello, trying to get the m-audio ex-p pedal to work. I went into the application, set it to settings, set it to channel 4. in the MIDI signal test it shows CC#4 Value 1-127. Neural DSP does not see these commands :( help!!!
You need to make sure if your Neural DSP product is successfully connected and how it's being controlled. If your MIDI test is fine, it means your product is okay. You should then check if Neural DSP is connected properly and if the channel and codes are correct.
Is there a manual anywhere?? I can't find any on your website? I can connect via Bluetooth to my Windows PC but when I run your CubeSuite software, all I get is a "Waitting for device connect..." message!? How to fix this??
been a good week of work trying get this thing working cube suite just dose not work for me in alberton 11 windows 10 so called software effector cost money..tryed midioxse,,MidiSuite,,,rtpMIDI aloning side of midi loop of course and more software than i care to think about anymore...midi display is no where ...such a shame this nice device was clearly released with out appropriate drivers please let us know when that happens thanks
@M-vave Hello. I bought a chocolate M-Vave, it connects to the pc through bluetooth, but it is not recognized by any software. It doesn't even show the option to connect to the midi controller, even though it's connected. can you help me?
Windows?Windows has two methods. One is to use the MIDI connection in our MIDI system. This method is relatively simple. The other is that you can send an email to support@sincoaudio.com
The same Question!!! How can I use with Bias FX 2 for Windows?? Necessarily to use Midi B?? cause i can´t make it work via Bluetooth or USB Cable. Need Help please!
USB can be used, and MIDI B can also be connected. If you have any specific questions, you can shoot a video and send it to support@M -VAVE. Com for assistance.
The latest cubesuite and firmware can change the maximum and minimum values of the pedal in advanced customization mode, that is, the value when lifting and the value when pressing down. If you don't know how to do it, you can send an email to support@M -vave. Com for detailed consultation.
Hi Ezra! Same issue here, any solution? When i try to set the pedal in the ap in 127-0 and close it, when open it again sets on 127-127 and i don't know how fix that :/
Hi there, I just got this device today, installed CubeSuite and got it working with windows 10 and the wireless adapter, using this video tutorial. However, after a few minutes of working properly, its screen now only displays "11", and when I press any button it displays "- -". How can I fix this?
Have you dealt with the problem? I have the Chocolate since yesterday and I noticed that after connecting Bluetooth everything works, but after about 2 minutes the device disconnects from the computer. Then I restart Windows 10 and the same thing happens again.
Essa configuração não funcionou pra mim eu uso o REASON 12 e GUITAR RIG 6 e quando quando configurei dessa maneira só ativa um click ou seja eu ativava o efeito mas quando apertava novamente não acontecia nada. Como eu só queria 4 botões de ação e usar o pedal de expressão consegui fazer isso usando o modo custom control e usei cc 03 cc 28 cc 20 cc 60 para os quatros botões. E no pedal de expressão coloquei loosen value no 127.
There is no way for us to shoot these contents without software or hardware authorization. For software, we need to set midi code modification in the software, and go online to find relevant tutorials in this field. It is to find a preset midi control code, and then another preset midi control code, and then set it to the midi control code you find through the advanced customization mode. Good software may also have the midi learning function to directly set it to the midi control code you want, such as CC12.
It is the same method as this video. You first connect the product to the computer through wireless or wired, then select MIDI device in the software, and then look at the software. If there is learning function, you can set PC code or CC code casually and select the operation you want. If the software comes with the default PC code or CC code, You need to set the corresponding code in the advanced customization mode of cubesuite to operate
In your case, the firmware and software do not match. We will update the new firmware and software soon and add some new functions. It should be like this in January and February next week. You can also send your details to support@M -VAVE. Com for feedback
@@M-VAVE Can you fix this please as the same thing is happening to me. I have just bought this product but considering returning it as it doesn't work.
Hello I bought your wonderful device! I like the opportunity to have as many options as possible. How can I assign more than 4 foot switch buttons (on/off) to my favourite PC amp or effect app? Is it possible to have something like Program Change A or B mode where you have up to 128 different control options connected to my guitar software/VST? :)
At present, this product still cannot realize 127 advanced customization. At present, the advanced customization of this product only supports short press and long press, that is, PC code or CC code editing with up to eight keys.
@@M-VAVE Thank you so much for your reponse, I managed to do so but had to use a 3rd party software (MIDI-OX) to convert PC to CC codes (because most Virtual Amps use CC). Could you answer me a last question? Do I have to connect the Chocolate device via USB to get in touch with the MIDI Input Device?
I do everything according to the instructions in the video. When connected via usb cable to a laptop, there is not even a sound of connecting the device, the pedal is only charging, but it does not appear in the list of connected devices, so it cannot be selected in the DAW or plug-in. It turns out only to connect the pedal to the bluetooth built into the laptop, but even then, in order for it to work and appear in the DAW, you need to install and run two additional programs (loopmidi and MIDIberry). Release the normal drivers for Windows 10.
Logically speaking, if it can be charged, the USB port should be OK. The probability problem may appear on the USB line. It is possible that the USB line you use is a charging line, which makes it unable to run data. The function of usb-midi must be available.
@@M-VAVE I specially connected the pedal to all usb ports on my two laptops, as well as via a USB hub. Only charging is going on, the device itself does not connect. I have several other MIDI keyboards and controllers, all of them work fine via USB. I ordered Chocolate in September 2021 under the CUVAVE brand, maybe the first batches did not support USB connection, or I got a marriage.
@@sergiogr7574 Hello, you mean your cable can connect other devices to the computer, right? So if it's not the cable and computer interface, it's the USB port of the product. What I want to tell you is that this product must have usb-midi, so if your product can't connect usb-midi, you need to contact your seller to see how to help you deal with this problem. You'd better shoot a video that you use that cable to connect the computer of other products to respond, and then send it to your seller to help you see how to deal with it.
Holy shit, this is exactly what i need, can i use an expression pedal into it to control the whammy pedal in the gojira plugin? If so its an instant buy for me
Thanks for uploading this tutorial! Can you also upload videos on how to use the app using Android OS? The user interface of the Android version app looks quite different specially in the Advanced Custom Mode settings. I encountered a lot of errors when using it because the app always restarts or shows an error message whenever I use the Advanced Custom Mode until my Chocolate MIDI footswitch stopped working and now it's not powering on even if it's fully charged. I contacted MVAVE via email and got help from one of your tech guys but it did not fix the problem with my device and I got no other choice but to order a new one. 😓
The flash back of your device using a certain mode indicates that the firmware version and software version do not match, so you need to upgrade the software and OTA upgrade the firmware. Ensure that they are up-to-date before use. If you still can't start the machine, you can try to remove the screws on the side, open the cover plate, unplug the battery, plug it in again later, or upgrade the OTA without the battery.
this thing a nightmare on windows none of the software drivers works cube suit very unstable wont run unless ya suck mricro disk off....mine is stuck on the worng setting cant change i..got andriod app after painful search crap app dosent hold my settings DONT RECOMMEND VERY VERY BAD SOFTWARE
@@M-VAVE thanks i was able to get it connected with a cheap USB Wireless 5.3 Network Adapter, USB Dongle from temu and useing software connector at last but it keeps booting in to the wrong mode after setting it on my phone, is threre a way to reset it please i dont have facebook thank you
Olá, nós somos o canal de vídeo oficial, por isso não fornecemos preços e canais de compra. Você pode encontrar os métodos de compra e preços em seu site de compras local ou software.
@@engineeringdreams5408 Sa pamamagitan ng wireless connection? Kung ito ay isang wireless connection. You need to purchase midi system to convert BLE MIDI to USB MIDI, or use midibrry and loopmidi.
@@nathanielmontemayor8984 i found no tutorial in web. The process is easy: launch virtual midi channel via loopmidi, connect the device via bluetooth to your windows machine, launch midiberry, route midi from bluetooth to virtual midi in midiberry. Thats all. Next you can use this virtual midi in daw or standalones. also midi-ox can help you to program midi to have 2 banks for 3 full cc on/off buttons. No dongle needed. No midi over bluetooth on android as manufactorer says((
