Choosing a Wireway for the Sol-Ark15k

Подписаться 10 тыс.

Просмотров 3,9 тыс.

50% 1

Which wireway for a sol-ark 15k install. A 36” 12”x12” wireway is the minimum size recommended for a neat , single Sol-Ark 15k install. A 4’ is probably the best size. Contact us today to order your Sol-Ark!
Contact Johnny Valentine
7708433497
Jv@gainsolarpower.com
www.gainsolarpower.com

Опубликовано:

14 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 25

@awbean5254 Год назад

JOHNNY, GREAT JOB! THANKS FOR THE CODE SPECIFICATIONS FOR US WHO DO SOLAR DIY!

@CRsolar 11 месяцев назад

I like that you show your work. Thinking I wouldn't put that transfer switch that low.. thinking I would make a little wider area just in case you need to add another bank of batteries or another inverter or a larger inverter etc if possible

@burtonnystrom4606 Год назад

Ya always do great work Johnny 😎

@cgutowski471 Год назад

Another great tip video. I see some of your installs that have a 12” deep wireway panel under flush mount panel. How does that pass inspection? Thought rule was 6”.

@GainSolarPower Год назад

We are in a pretty slack area. I should be furring them out with unistrut but do as I say not as I do!!

@balrog006 11 месяцев назад

The 15k is a bit more than 6” so a 12” wireway below it is generally not a problem.

@cgutowski471 11 месяцев назад

@@balrog006 it is a concern as you can’t have anything protruding more than 6” in front of the service panel per NEC. A 12” deep wireway would be a violation for a flush mount panel.

@balrog006 11 месяцев назад

Well if the front of the inverter and the front of the wireway are in the same plane and flush with each other-nothing is protruding that 6” so it isn’t an issue.

@cgutowski471 11 месяцев назад

@@balrog006 you are not reading my statements…under a flush mount panel. Wireway in front protrudes 12”….6” more than allowed.

@davidorcutt9246 Год назад

Nice job Johnny!!

@davidorcutt9246 Год назад

Do you find the PDB to be more economical than using a “Polaris” type multi compression connector? Thanks.

@SUNofNY 11 месяцев назад

Love the videos. How much is the wireway? I didnt see it on your website...

@niktak1114 Год назад

My inspection failed because I had my 12 inch wireway running below my flush mount main panel. It's taking 2+ months for new wireways to arrive lol

@GainSolarPower Год назад

I’d go to a sheet metal shop and have the mark you a new top

@SolarDrew Год назад

Good info JV!

@garybeihl110 Год назад

With the transfer switch mounted underneath like that, how tall does the Sol-ark display end up? If 6" bottom solark clearance plus 12" wireway + 30" transfer switch height + 24" from bottom of Sol-ark to the display that would be about 72" - maybe a little high?