Church Video Upgrade - SD to HD; PTZ, vMix & NDI! 

Thank you for this excellent video!!! Just what I was looking for!!!! 👍🏽

what was the hdmi to cat6 amp that was installed? looking to upgrade from composite. thanks

Excellent video. Thanks for sharing. Vmix is revolutionary. Especially now that it supports NDI. Rowby

Hi this setup is for only one camera, what else will need to setup 2 or 3 cameras? can I combine PTZ and HD Sony or canon video cameras? I have Blackmagic ATEM TV studio for 4 cameras, is this a good option? or it's getting obsoleted? I would like to hear your advice, Regards Sam

we also have a small church but we are growing. this information is great. i am the only one that knows anything of upgrading running wires hooking up, just a jack of all trades. but i am dangerous. So i guess the first thing is drawing it all out as to what we want to do and equipment we need to accomplish the end in mind. one question the tvs in the foyer do they have sound or just video

Our church is planning, or rather in process, of upgrading to PTZs and vMix for streaming/recording. We’ve had nothing up until now. The cameras, once installed, will not be easily accessible, therefore they will need to be controlled and powered remotely. What would be your suggestions for cameras, pc, I/Os to run and control 2 PTZs on vMix? We currently have an Aux. send output designated for our streaming mix. What’s our best options since we our at the purchasing stage of this process?

Great job ! Could you share a vídeo of this church? To see the final result. Thanks

BECAUSE MOSTLY WE RECORD ON VMIX AND STREAM ON V -MIX BUT PEOPLE IN THE CHURCH NEEDS TO WATCH ESPECIALLY THOSE WHO SEAT FAR NEED TO WATCH ON TV OR PROJECTORS AT THE SAME TIME THE ACTION IS HAPPENING.

Dude!!! In what year is your church functioning? :D Looks like 1990 with all the type of gear.

Great video! Please what application did you use for this diagram workflow?

Sir, I'm interested in doing something at my church maybe you can give me some advice on. Keep in mind, I don't need new stuff for this, perhaps you could sell me some old equipment that would fit the bill. I'm a church organist and the organ is in the balcony facing the rear wall. I would like to have a simple video monitoring system with a camera near me on the balcony rail (needs to be PTZ) aiming forward to the chancel. I would also like a camera up in the chancel facing back towards the church entrance (under the balcony where I cannot see), also PTZ. I would like to have a sufficient monitor and a switching system whereby I can toggle the cameras, and do the PTZ as needed. I believe it will need to be a wired system as we cannot have a delay in the event there is an orchestra conductor up front and I need to view the conductor in real time in the monitor. I understand the wireless or digital monitors have a slight delay which would be undesirable. Please let me know what you think, sir. Could I do something for under $1,000? Thanks! -Ryan

Thanks for the video and great job! Our church is looking to start live streaming and a member suggested buying a couple Cannon 5d mark iii's for this. However, I've read that DSLR's aren't a good option for long form video (1+ hours) due to overheating, etc. and that actual video cameras are a better option. Have you found this to be true? Thanks!

Do you have an updated picture of that schematic you show in the video? I'd appreciate it if it's available! It's not in the blog post.

i have a Laptop,. Which is the best device to capture video about 4 cameras?

the only thing is you are using a trial version of Vmix

May I please know of a way to help my church obtain this setup or equal?

Is your church registered with the FEMA pastoral army?

A couple of questions: What's the make/model of the HDMI to Ethernet converter? I can't find it anywhere on your site. What is the function/role of the decimator?

Please may I have a diagram as well, or could it be put in the video description?

Thats Awesome!

Do you recommend using the ptz over a mid level cam corder ??

hi man my question is how do you manage to take the final output feed i know that you used cat 6 for extension but what dou use as the output from computer to the tv

Hi, can I ask how you made the connection diagrams shown in the video? Thanks!

Wait, so how do you have Wi-Fi connectivity at your church? Rookie trying to figure things out

Any chance you could post the diagram publicly? Thanks!

At first, I felt like I was in a Spy Kids movie. lol

Pls I need all this equipment list

You can buy an expensive HD camera but like the video shows, a simple HD PTZ robotic camera run by a PTZ controller is all you need

Kindly share your diagram thanks!

would love to know how to have similar setup with 2 ptz camera?

May I ask why you have two capture cards (mini recorder & Intensity pro)? Shouldnt the mini recorder by itself do the job of streaming?

Nice

Could you send me a copy of the diagram? Badly need it. thanks mate.

I like that 8TB hard drive, but I don't understand why someone would want to save that much data on 1 hard drive without any RAID. That drive fails, you've lost everything. I learned a lot from this video, but I don't know why the choice there for storage. I'd love to hear that, because if there is a valid reason, I'll consider it on my jobs.

Can I also get the diagram, please?

Dear Santa...............

Could you send the diagram? Thanks!!!

I'''ve got a job for you in Riverview, Florida!

That intro though...I pity all headphone users.

NSCaster X1 supports operating PTZ camera such as zoom, focus, aperture operation, up, down, left, right, top left, bottom left, top right, bottom right movement. It also supports drag and drop arbitrary position, and quickly locates the target. Learn more: nagashare.com/

Great Video! We would like to invite you to be on our live show. Please contact us

Hopefully you are giving it to a small church? Not charging but giving!

So much prepotence in the tone of the narrator.

Could you send me a copy of the diagram? Badly need it. thanks mate.