Change your own front lights of your car in just a minute. Buy the H7 55w head light/main lights and follow this nice simple tutorial for beginners who have no experience in car mechanics.
Good video. Just saved me a lot of money - never changed one before and thought would be more complicated than that. Also thanks for the warning on not touching the bulb!
Many thanks for this. According to the manual there should be two clips but our car is exactly like the one in the video. The bulb and connector came out after going down a pothole Thanks once again
Just a ps, there are two t20 screws on either side and on our car they were too tight . Unscrewing them slightly allowed the connector to be located thanks once again
When putting it back in, if it's a tight fit you may need to apply pressure to the metal wings of the holder rather than the plastic body to avoid too much strain.
Thank you so much for this video. After watching it I've changed successfully the bulb. I do have a question. Near that bulb are other two bulbs and I realised I have to change those also. Is the same procedure? The one you have changed is H7 12v 55w and I would appreciate if you could tell me the names for the other two. Thank you!
These are not the same procedure, al though the rubber housing works the same. Blinker light is just pull no twist same with parking light. High beam you have to remove the plug en push two prongs out. Blinker light H21W Lights H7-55W High beam H1-55W Parking light W5W Fog light PSX24W
Are you working for a lightbulb company? Because that’s a way of selling more bulbs 😜 Don’t touch the bulb please, the grease will shorten the life of the bulb.