CityBug Replacing Anti Roll Bar drop Links With Poly Bushes Peugeot 107, Toyota Aygo, Citroen C1 

I had a Peugeot 107, I bought it for my wife, but it turned out that for the last 5 years I drove it on the Germany autobahn, a year ago I sold it because I went to Ukraine for the war, I took a lot of useful information about this car from your videos. Congratulations to your channel, friend 🤝❤️

Saved a lot of time doing both sides of my car as didn't have to split the lower joints. Thanks for the heads up on that method 👍👍

Great Video Ant. Thanks for taking the time to make this. Good Luck garry.

Head under a strut wheels off no axle stands,jack only lifting. Reminds me of one of my AED shifts. Mainly because of all the paperwork for the coroner. Axle stands are for life !

Am I missing something here? When you lowered the car down to check if it was going to be ok there was loads of room so surely it would have been easier to put the bolts in the correct way

I fitted exact same ones by taking both wheels of and using axel stands and separating ball joints on both sides at same time then fitted the links from the top with the lock nut on the bottom easily with loads of clearance..had to cut a bit bit off the bolts though as a little too long about half inch on each.... working well with just a slight more stiffness

be wise to put the wheels you took off under the sills if your not bothering with stands ,,, its the difference between loosing toes and not , and lets you put a jack under the car again if it does go wrong

Blimey they sold out quick! Went on easier than when I did it lol, fitted Febbi Bilstein parts last year but undid the ball joints.

Another great video! Useful stuff, thanks Ant!

Perfect video, have enough information now to have a crack at my own before the next MOT as these flagged as advisory on mine, what's the best way to of figuring out what pulley has a little rattle too, most noticable during colder weather

Any chance you can do a video on where to use axle stands on the city bug front and back as so many people seem to disagree on this so I’m never sure who’s right. 😢

Thank you for posting video found it very informative may have been a idea to locktite or put a locknut on the threads? but that's belt and braces.

Great video! makes it a lot easier :)

Big Tip....dont go anywhere near a car that's not on axle stands

Don't use NAPA branded replacement drop links. After 8 weeks, the rubber in the drop link was all rotten, split and looked worse than the original 18 year old ones. Dealer did give me full refund and I purchased genuine Peugeot ones

After the axel stand gave more room , would the drop link bolt fit the other way so the nut at the bottom

Those ratcheting rings can get you into all sorts of trouble!

I hope you are going to read my comment and reply as im interested about something else - not just axle stands missing 🤣 How those links performed in time? Did you have any provlems with noises from suspension? I am asking for this cause looks like anti roll bar sits closer to suspension arm with these links as spacer is smaller than in genuine ones. Didn't they touch each other? And how is driving? Didn't it make any difference due to anti roll bar position slightly changed? Going to upgrade mines i think as after replacing them with SKF a week ago, today one of links snapped in half...Quality of parts these days. Awaiting any reply which will be appreciated. Cheers Edit: Forget question about performing in time. I missed that you uploaded video an hour ago 🤣 For some reason I've seen 1 year ago 🤣 Rest of questions stil valid 😁

Are you saying you can replace the drop links without spearating the ball joint by the looks of it? thanks

Can you see any visible difference in handling with installing these?

I have a 108, I ordered normal anti roll bar links and they was longer than the original ones that was on, after 1000 miles I’m getting a grinding/ rubbing noise when I accelerate hard , mainly on a hill, I think it’s just catching on the drive shaft boot lock when the front end lifts , will this improved part fit on my 108?

Do Energy Suspension make a shorter version that will not need cutting down?

If I will buy only polyurethane, without steel (bolts etc.) - is it fit to old bolts in Aygo/C1/107?

Nuts always on the bottom not the top so if the nut comes off the bolt stays in and doesn't fall out.

hi think i would just have dropped the ball joint then jack under the hub lift it out the way ,,thats what i did on my aygo ,,

Hi, do you have a link for these as I can’t find them anywhere

Where's your axle stands? I can't see them 😕

👍👍🇵🇹🇲🇫🌎

No axles stands again.....a lot of young drivers have these cars who don't know better. Please stop doing this...