🇬🇧CityBug Peugeot 107 Exhaust Rear Backbox Dropped Off, How To Replace. 

Just did mine. Parked the car half on the kerb so I could get under it. Took 40mins because of rusty bolts. So easy. Love this car.

Corrosion on Exhaust was an advisory on my MOT. It fell off before I repaired it . Bought a new bracket and passed next MOT without any advisory. Simple job and easy for a simpleton like me. Always good to inspect the rubber mountings, as these can be replaced at the same time.

Much obliged for the Vid. The pipe coming from my engine had detached at the muffler on my Aygo. This vid just saved me £110!! I managed to get a local parts shop to get me a new silencer for £49 delivered within 2 hours. Kwikfit quoted me £157 to replace it. Needless to say after watching this I did it myself. Many thanks.

I have a twin stainless steel custom exhaust on my Peugeot 107. It came with the car. I've just bought a standard exhaust as going to sell the custom one. It pops and bangs etc. Just way too loud for my liking. This video is great as clearly shows the job being done and informative also. Thank you.

3:24 thank you for this mine broke earlier when driving down the motorway.

Thanks love how easy and cheap is to work on them small cars

Great video thanks, my son owns one of these and is learning to drive and the rear hanger has come loose off the weld . I see there's a repair bracket and I was originally going to opt for that , but after watching this, I've gone for the complete back box and I'm going to give him his first lesson on maintaining his car . It's also due a mot in January , so for the sake of £40 it's a no brainer. Thanks again for posting this.

Good to see its a straight forward easy job, I see online there is also a gasket that goes into the joint I think before the clamp goes on.

I replaced the back box on my Aygo but I didn't angle the bracket so it used to hit the bottom of the car. it made a terrible noise. Thanks for the video.

Super useful. Great job 👏🏼

Thanks Anton, pretty good video. As simple as the car and it's repair and service. I clicked on the link to the exhaust clamp. This cheap thing is "German Engineering"! Wow, I'm impressed! 🔥😃🔥

Thank you so much, your videos have helped me many times!

Fantastic video once again. One for my RU-vid archive list.

That's so cool, My 107 has just had this happen. I popped into Kwik fit & they said it's the exhaust bracket gone. Recommended a welder because Kwik fit would just replace the back box if they did it, but the local welder said it'll likely be cheaper to just get the back box, but I would be way out my depth & don't have a jack etc. But it was interesting watching you fix it! I shall try find a place cheaper than Kwik fit anyway.

That new exhaust sounds like a helicopter awesome 😋 my daughter has a 5door c1 it went in for a recall the other day to have the rear windows re bonded (5 doors only) as the glass can fall out when the hinges become unstuck 😱

prefect time mine just broke thanks for the upload.

Give the wee thing a shot of acf 50 , it will stop that surface rust for a couple of years , then just spray it again ,, great stuff and it even smells nice.

When I fit cheap back boxes I always spray BBQ paint on all the welded bits. This seems to make them last longer. Don't really know why the manufacturer's don't do it in the factory.

Useful video, thanks 👍

Nice video,, and I like those rims.

Legend, thank you 😊

Sweat as a nut mate good camera footage 👌

Grazie

It would be great if you did a short video on where the axle stand points are on the front & rear for the Aygo as I see a lot of confusing information on this.

Cheers mate!

Did this exact job a few months ago!

Great video thanks! You dont seem to need to on this video, but any tips on seperating the through pipe and the end can pipe (the bit beneath the clamp)? Trying to seperate the rusted through end can but cannot get those bits apart. Have tried WD40 and even some heat but it's so stuck. Thanks!

Haha didn't realise the fucking bracket corroding and falling off was common. I drove an hour to Lydd for some gokarting and then went to drive off afterwards (everything was fine) and my exhaust just dropped. Had to cable tie it temporarily until I got my replacement backbox

Thanks 😊

Thanks

good

good job

I think this may have happened to my car and I’m meant to be driving an 1hrs journey tomorrow, do you think its safe to drive with before i can fix it?? great video btw, very helpful!!

Easier than I thought

Evening Fella. Great information contained within a fantastic video as always. Great to c u back spannering 🔧🔧🔧🔧🔧🔧 I do like the videos on the DINKY TOYS. Glad to see you've ad a rest from recreating the "DODGY 1970'S FILM" set wiv ya new lights 🙊🙊🙊🙊🙊🙊🙊 I'm liking the subtle reference to your Son in his number plate. Stay safe. Stay healthy. Alan L200

Where did you get that trolley jack from? That's genius design!

Can't get over how tiny the exhaust is on the Aygo/107/C1. I've seen thicker drinking straws 🤣

Trying to get mine off at the joint, it’s so rusted it won’t come off, even worse i had to cut the clamp off at the bolt was far too tight to undo Soaked the joint with WD40 hopefully some progress tomorrow

Last month Jane Fonda set the internet ablaze with her Harper’s Bazaar cover in a sequined body-con Ralph Lauren dress, Dolly Parton inspired a cold-shoulder fashion trend with her vaccination video, and Joan Collins’s Instagram has been instructional on how to do lockdown in fabulous style. The latest “granfluencers” are Marie-Louise and René Glémarec, 86 and 87 respectively, who went viral after appearing at the last physical Paris fashion week dressed in the punk-inspired, gender-neutral clothes made by their grandson Florentin Glémarec for his label EGONlab, which he runs with partner Kévin Nompeix.

Great stuff pal, Do you have a link for that trolly Jack. I couldn't see it on your Amazon store. Looks like a handy piece of kit. 👍

Definitely need to find a long term stainless steel solution for this, the corrosion on these exhausts is too frequent, I'm looking for my 3rd one now and although they are cheap and easy to fit, I can see them rotting again within a year or two max. Is it possible to get a stainless solution that is just as quiet as the original without it sounding boy racer??

Great video. My experience was less straightforward and haven't been able to fit the new back box yet. My clamp was really really corroded. Used loads of WD40. It took hours to get off. A 13mm socket and ratchet should have got the thing off. I had to drill the bolt out in the end. (The clamp on mine was a one-piece and only has one bolt through it.) I put a block of wood behind and taped an old sponge to the back of the clamp to hold it in one place in order to drill it out. I'm struggling to get the new pipe to slide onto the existing one, it seems a tight fit. Possibly because the old one is quite rusty. I'm thinking I might spray a bit more WD40 on the old pipe and maybe use a bit of sandpaper on it to clean it up a bit more. Have you got any other tips or suggestions for sliding the new pipe onto the old one? If you have any suggestions, they would be much appreciated.

So the 'tractor' noise has just started to happen on and off with mine over last 2 days. Only had a new one fitted by 'kwik fit 😑' under 2 years ago and it's corroded already. Not great is it? Might as well get one and fit one myself with this video. Oh and I'll try the sprays etc on the joints.

Will the Tailpipe Hanger Exhaust Repair Clamp (48mm) work for the front part of the exhaust,that's perished and causing the exhaust to hang down.

interesting they uses a socket join rather than the tube inside tube which always made back box replacement a horrid job, i have a mk2 aygo and always looing to learn more from people doing stuff to theirs

Hi my exhaust was blowing around the join I noticed the clamp wasn't on properly. Should it cover both half's of the exhaust. Was wondering if my clamp wasn't wide enough

Tried to do mine and failed miserably, eventually gave up and took it to a local garage - they checked the whole exhaust as another local garage said I needed an entire exhaust. I supplied the back box - about £35. They charged me £15 to fit it!

Hi thanks for video any idea where I find the replacement bracket as I’ve looked online including eBay and can’t find it cheers

can`t split the rear and front sections. It`s absolutely solid. Help.

Where the back box meets the long mid section does it have a gasket?

Just had rear box fitted seems loud when car is ticking over

Are these cars worth buying are they any good for motorways I've heard they are very under powdered just looking for something cheap and cheerful what are the common faults

Had exactly this happen on my way back from the shops today , day before its MOT

How to change the steering fluid in this car and which fluid type is recommended?

Howcome it says on vid back box is 30 odd quid but link takes ya to one that costs alot more

searched car part stores for this bracket cannot find it any where if some one knows where to get it i would be obliged hounslow west london

1:00 2:00

Hello! what is the diameter of the clamp?

What are the wheels on it ?

0:15 7:35

did you hear that helicopter in 4:50

Hi, just to double check the hanger repair you link to says "S40 II, V50, C30, Tailpipe Hanger Exhaust Repair Clamp (48mm)" . Is this suitable for a 107 61 reg as I have just had the issue with the hanger freeing itself from the tail pipe.

Relatively £6:00 for clamp is very expensive

I hear a copper chopper