Classic Mini Restoration | Fitting The Engine | Ft Classic Mini DIY Collab

Подписаться 18 тыс.

Просмотров 27 тыс.

50% 1

HAVE YOUR MINI FEATURED IN MY VIDEO!
Follow My Instagram @tomshorrock
Send Me A Video Of Your Car!
Tom.Shorrock@hotmail.co.uk
WALLAH! Your Car Now has The Chance To Be Featured!
Website: www.totalcarre...
TCR Forum: www.totalcarre...
Go Fund Me: www.gofundme.c...
Classic Mini Restoration
Classic Mini Restoration fitting the engine after 2 years! in this video i show you how to fit a classic mini engine! :)
Im Tom
And Here you will be able to follow my classic mini restoration from start to finish! It is an Austin Mini Mayfair 998cc registered in 1986. I bought the car with 2 months MOT and it was running although the slave cylinder had gone. My plans for the car are to restore it to my standards just like my Orange one if not even better... if thats possible. More videos on the way of the classic mini so be sure to subscribe and keep up to date.
Any questions or interests be sure to drop me a comment i will be more that happy to get back to you.
♫Music By♫
●Dyalla - Inquisition - • Video
●Soundcloud - / dyallas
●Song: Ikson - Last Summer
●Video Link: • Ikson - Last Summer (V...
●DJ Quads - Happy Feeling
●Song/Free Download - • Video

Опубликовано:

9 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 127

@sdungworth 2 года назад

Can't wait to see this mini Finnished 👍

@TomShorrock Год назад

thanks Dude!

@aussiebloke609 5 лет назад

You kids have it so easy. I remember doing a swap on my mate's Mini back in the '80s. No crane, just the two of us lifting it in by hand. Damn kids these days... *grumble grumble* And looking back on it, it was stupidly, and stupidly heavy - how we didn't bust a gut of blow a disk is beyond me. Still...great days. :-D

@DBMiniDIY 6 лет назад

And the eagle has landed. Well done Tom and Mark. Another great video and loving the interaction between you and Cole and Alex. And last but not least great editing because I know that must have taken hours.

@TomShorrock 6 лет назад

haha! thanks buddy! and your certainly correct although i like to tell myself it took me minutes :) 720 minutes to be precise! which as we know equates to 12 hours haha! cheers again dude :)

@DBMiniDIY 6 лет назад

Total Car Reviews well it is enjoyed and appreciated by all your subscribers so keep up the gd work

@TomShorrock 6 лет назад

DB Mini DIY haha! Thanks again buddy and I will try my best 👌🏻👌🏻

@carl88norris 6 лет назад

The mini DIY crossover was killer 😂😂😂

@TomShorrock 6 лет назад

chuck ruckus haha! Glad you enjoyed! Have to thank Cole for this aswell as he managed to get the footage to me in time 👌🏻👌🏻

@thedjse 6 лет назад

Boom the engines in actually buzzing for you pal!!! Massive step that. Thanks for featuring my mini in the mini of the week.

@TomShorrock 6 лет назад

thedjse no problem at all my friend! Told you I’d get round to you 😉

@SV_Freeman 6 лет назад

Have seen them all! Love it how you build up this car 🚗. Got a 93’ British open myself, learning so much just by watching your videos. Keep it up, greetings from Germany.

@TomShorrock 6 лет назад

DLHP2 Dude!! Thanks for taking the time to view my content! It certainly makes it worth while! Glad I’m able to teach you things even if I’m still learning myself! I’ll try to post as much as I can and hopefully you can stick with me for the next build 👌🏻👌🏻

@thebluep0tat0 6 лет назад

Team Slaphead! Need decals asap....get them printed up, Tom!

@TomShorrock 6 лет назад

thebluep0tat0 haha! I will do ! I’m in the process of searching for merch😂😂

@georgeknapp271 6 лет назад

Well done mate getting the 'Motor' in. And glad you found missing the 'Lug' nuts! Nearly thought we missed out on are feline friends . Great vid.😁

@TomShorrock 6 лет назад

George Knapp haha! Thanks George means a lot matey 👌🏻👌🏻

@sdungworth 2 года назад

I got all my stuff from Huddersfield mini spares in my time and they were mint for everything just unfortunately didn't have what you needed at the time 👍

@TomShorrock Год назад

Huddersfield spares is good supplier however the chrome work is cheap and doesn't last long

@mattylittler9838 6 лет назад

Congratulations m8. Good to see the hard work paying off!!! Well done m8!!!

@TomShorrock 6 лет назад

Matty Littler thanks Dude means more than you could imagine 👌🏻👌🏻

@MiniMattTV 5 лет назад

Because of this video I made sure my engine mounts were the non captive but type! 👍 cheers!

@carl88norris 6 лет назад

Nice one lad!

@TomShorrock 6 лет назад

chuck ruckus cheers Milado!! 👌🏻👌🏻

@BMCWorkshop 6 лет назад

Nice one Tom, I bet your glad it's finally in lol

@TomShorrock 6 лет назад

Sean C haha cheers bud! I certainly am, feels like I can relax a little now 😂😂

@owenhill9944 6 лет назад

So exited to see that engine in

@TomShorrock 6 лет назад

OWEN HILL12 haha!thanks Dude’

@MiniMattTV 6 лет назад

Loved the classic mini DIY collaboration too! You didn’t call him out on calling an engine a motor though! 😂

@TomShorrock 6 лет назад

Mini Matt TV haha! Ino I realise this after spending way to long editing then I thought I’d let it slide haha! 😂 glad you like it 👌🏻

@charlieboyok 6 лет назад

Mini matt TV : l remember watching a British show & a mate says to the other "Lose the Motor" yes it was stolen & it was ........ a Ford Granada , in Australia they were called "Falcon" 6 cylinder 4.1 litre they also had 4.9 v8 , so Bite me lol !

@deanbowles6429 6 лет назад

Well done , finally in ...

@TomShorrock 6 лет назад

Dean bowles hash! About time innit! Cheers bud!

@deanbowles6429 6 лет назад

Total Car Reviews new wheels next

@TomShorrock 6 лет назад

Dean bowles definitley! 13x8s 👌🏻👌🏻

@malcolmyoung7866 6 лет назад

Nice videos and a little bit of Peter McKinnon in there at the end. Great progress and a it's nice to have a 'Slap Head' to take out your frustrations on!!

@TomShorrock 6 лет назад

Malcolm Young hahah! Cheers bud! And yes me dad with the old slap head! 😂😂

@-sargntclashroyaleandmore-491 6 лет назад

Cole is a very helpful chap 😂😂👍🏻

@TomShorrock 6 лет назад

- SARGNT Clash Royale and More! - he certainly is! And a decent guy 👌🏻

@robukauto3484 6 лет назад

Looks fantastic - so nice when everything is cleaned up and painted. We have decided to not put back the sound deadening material on my son's, it just takes away from the clean look and collects dirt. Look forward to seeing your finished job. We are many months behind you and going at a much slower pace.

@TomShorrock 6 лет назад

Rob UKAuto Dude! Any pace is progression that’s the way you have to look at it 👌🏻 as for the sound deadening I totally agree! Looks gash! You will have to send me some Pictures of yours! Look forward to seeing it 👌🏻 and thanks for the great feedback Dude! 👌🏻

@ClassicCarCave 6 лет назад

Tom, Great job mate, It is a turning point when the motor goes back in looking forward to hearing start up! Cheers Dave.

@TomShorrock 6 лет назад

davejaguar66 be prepared for my emails bombarded with questions dave 😂 as this will be the hard bit for me, trying to get it to run! Glad you think I did a great job means a lot! And your mini is looking the dogs! Also! Cheers mate 👌🏻

@ClassicCarCave 6 лет назад

Tom, No sweat you can even text me drop me an e-mail and i will send you the number, Cheers Dave.

@TomShorrock 6 лет назад

davejaguar66 dave! Your a legend! I’ll definitely drop you an email 👌🏻👌🏻 cheers mate!

@MiniMattTV 6 лет назад

Love it buddy! Congratulations on getting the engine in! So so chuffed for you! Really enjoying watching this one 😊

@TomShorrock 6 лет назад

Mini Matt TV haha! Cheers Dude! Definitley feels a stress off my shoulders! Let’s hope it runs 😂😂

@MiniMattTV 6 лет назад

Total Car Reviews 😂😂 yeah fingers crossed

@kevinshales1380 6 лет назад

Hey Tim, once again great work. Just a pointer make sure you fit the gear box selector and stabilize rod, before you bolt up the manifold 👍🏼

@TomShorrock 6 лет назад

Kevin Shales thanks kevin! And will do buddy 👌🏻 cheers for advice 👌🏻👌🏻

@tomroberts3124 6 лет назад

Yass been waiting for this, great video again Tom!!

@TomShorrock 6 лет назад

Tom Roberts cheers bud! Apologies for being late it’s just been manic with it being Christmas 😂😂

@MaddminiVlogger 6 лет назад

Aww mark, you remembered :D ..nice one Tom, the engine is in now the fun begins dude. its coming along nicely though mate, and I promise this week MOTW video will land in your inbox and it will be amazing ;) ..also I now want a #teamslaphead t-shirt HA! nice one.

@TomShorrock 6 лет назад

hahah! cheers buddy! I will look out for this video :) will be great :) !

@ukcarspotting9508 6 лет назад

Great vid tom

@TomShorrock 6 лет назад

ukcar spotting thanks buddy

@TomShorrock 6 лет назад

If you want to submit car of the week, my email and contact details are in description also there is a contact me page on my website, so either of those buddy 👌🏻

@TheGentlemensMotorRacingTeam 6 лет назад

that was a great video, yea those captive nuts can drive you mad but trying to fit normal nut and bolts especially the one behind the clutch housing can be nightmare - and being follically challenged myself i would be well up for a team slap head T shirt :) - keep those videos coming :)

@TomShorrock 6 лет назад

haha! thanks dude! you positive feedback means a lot and drives me to do these videos more and more :) ill look into the team slaphead shirts :)

@OnlineHousehusband 3 года назад

Always thought this had a 1275 but it appears to be a 998 looking at the tappet covers 👍

@TomShorrock Год назад

Its now a 1380cc

@markshorrock6645 6 лет назад

Great vid SON team 👋🏻 head . Need to get some t shirts printed # teamslaphead

@TomShorrock 6 лет назад

certainly do dad :)

@MaddminiVlogger 6 лет назад

Dear god, what have I started, I claim royalty rights hahah.

@bentarnowski2494 6 лет назад

Yes, finally 😂

@TomShorrock 6 лет назад

Ben Tarnowski haha! Apologies 😂😂

@scottderuyter3812 6 лет назад

Super awesome vid!! Loved the cross lid with dyi

@cal844 6 лет назад

Now it's on its wheels, get the inlet and exhaust manifold(s) fitted, best to keep the engine steadies off the car until carb is in place and wired up, then fit the radiator, alternator and starter. Then double check everything is connected before cranking...

@TomShorrock 6 лет назад

calum michie top advice! Thank you! 👌🏻👌🏻 got the new rad to go on after crimbo 👌🏻

@piperdoug428 6 лет назад

Awesome vid as usual, high on the slapage meter. cheers.

@TomShorrock 6 лет назад

PIPER DOUG hahahahaha cheers Doug! Your comments never fail to amuse me 👌🏻👌🏻

@petefroud5308 6 лет назад

Nice job Tom . BMC green engine block.

@TomShorrock 6 лет назад

Pete Froud thanks Dude! Had to make it look old with the BMC green 👌🏻👌🏻

@caustin1234 6 лет назад

Good work Tom lad!

@TomShorrock 6 лет назад

Chris Austin cheers! Chris lad!! 👌🏻

@markpiper8082 6 лет назад

well done. but you still have the fan on the wrong way if you havnt chanred it already and the spacer needs to go in some where to insure the pullys lign up

@TomShorrock 6 лет назад

mark piper I swapped it around Mark, but snapped it when putting it in 😂 so I have another one I need to fit 😂😂

@bentarnowski2494 6 лет назад

It's not a trunk, a trunk is on an elephant. It's not a hood, a hood is something you put on your head. It's not a shift stick, a stick is something you use to walk with. Gas is also a liquid apparently Oh and a 'motor' is a combustion engine. American terminology for ya.

@TomShorrock 6 лет назад

Ben Tarnowski haha! It’s all fun any games 😂😂 that’s why me and Cole agreed to do the collab for a little banter 😂😂

@bentarnowski2494 6 лет назад

Total Car Reviews yeh, did make me laugh tbh 😂

@TomShorrock 6 лет назад

Ben Tarnowski that was the aim ! And glad it did 👌🏻👌🏻

@philippbraitinger7439 6 лет назад

Love your style ! Own on my self a Mayfair 1992 as a century Project 🤣🙈. It will be more a fun car than a classic one, but love to see your vlog- keep on going. Cheers from Münster.

@TomShorrock 6 лет назад

Philipp Braitinger thanks Dude means a lot! Don’t forget to send it in for mini of the week 👌🏻👌🏻

@MiniPerformance 6 лет назад

went in easy that!

@TomShorrock 6 лет назад

Richspec haha! It did until the bloody captive nuts came into play 😂😂

@WJ52TLX 6 лет назад

Great to see the engine in but did sort out that loose near side CV boot

@TomShorrock 6 лет назад

WJ52TLX haha! Thanks for reminding me again! I’ll definitley do it in my next episode 😂😂

@stephenstokes8318 6 лет назад

When you unbolted the top ball joints I thought u might of sorted the CV boot out at the same time

@TomShorrock 6 лет назад

I totally forgot Stephen! I will sort it I promise haha! I think you may have reminded me atleast twice ;) haha!

@stephenstokes8318 6 лет назад

Yes I have lol don't forget to mention by name

@charlieboyok 6 лет назад

Hi , l bet that was Fun to do , oh & your Mate's arse kinda got in the way of the Motor being put in (sorry engine , to all you Brit's out there ) How much was the engine alone was it a recon part build ,or new total rebuild , oh could you ship it over to Melbourne , Australia after you have finished it " lol "

@TomShorrock 6 лет назад

hahaha! cheers mate! and the engine hasn't been rebuilt it came with the complete car :) its just been sprayed up and had the clutch changed :) in my opinion which fix something that isnt broke :)

@ianroberts8692 6 лет назад

Great video, but how the hell did you get Bruce Willis to help you 😂😂

@TomShorrock 6 лет назад

ian roberts haha! Thanks Dude! And I have my ways, I have my ways 😉

@iandevlin6824 3 года назад

I'm a few years behind on these videos and your channel but I'm glued to it ... Great build and your a gas man to watch 👍 dud you fit a stage 1 kit or anything or is it all standard ??

@TomShorrock Год назад

Hi Ian! thankyou so much! gland you enjoy it! have you seen any of my newer stuff this month ? The mini had a stage 1 Kit yes

@fragged8 6 лет назад

no need to remove wheels and pop the ball joints, lower the engine with the drivers side lower and put first pot joint in then lower the other side of the engine and slide in the other pot joint , job done .. I wouldn't have painted the gearbox either it can affect cooling in't summer.

@TomShorrock 6 лет назад

well you live and learn! thanks bud :)

@liamedwards3674 6 лет назад

love the vids ,, got a 200bhp m.e.d 1293 turbo and z cars r1 mini myself if your in the midlands feel free to pop over and have a play in them..

@TomShorrock 6 лет назад

dude!!!! that would be amazing and would be a decent vlog i could film! drop me an email with your details and we can arrange! it thanks a million :)

@gavinivers8941 6 лет назад

Car is getting there. Now get the oil presure up, and see if it goes....

@TomShorrock 6 лет назад

Gavin Ivers ooooo! Let’s hope so! I’ll Definitley be asking a lot of questions in the videos to come 😂😂

@randkprouductions 6 лет назад

all coming together...

@TomShorrock 6 лет назад

Rushabh Shah haha cheers buddy! Still a massive fan of your mini! It’s sweet! 👌🏻

@eamonnhind 6 лет назад

Brilliant as always! getting so close to the end now. Will it be ready for summer show season? have you got any lined up?

@TomShorrock 6 лет назад

Eamonn Hind my aim is for l2b! And potentially IMM in Portugal 😉😂😂👌🏻

@MiniMadness 6 лет назад

Nice to see it coming together Tom! I got my first resto vlog up today if you are interested too :)

@TomShorrock 6 лет назад

Mini Madness I’ll take a look bud! Always good to see someone new starting to document their build 👌🏻

@MiniMadness 6 лет назад

Cheers :) I got a lot of work ahead but it should be worth it in the end :)

@TomShorrock 6 лет назад

Mini Madness watched it before bud! Well done! Also thrown you a subscription 👌🏻

@MiniMadness 6 лет назад

Cheers mate :)

@1chish 6 лет назад

Yes the captive nuts can be 'tiresome'. I used bolts with a 'lead in' when I 'dry fitted' the gearcasings to check everything lined up. They have a 'lead' of no thread so it guides the thread in place. Quite common on new car manufacture and the Scanias I worked on. Just use the same bolts and turn down the thread for a few millimetres as it only sticks out anyway! Useful in many other places on a Mini Here is an example (please excuse the source): www.chinesemotorcyclepartsonline.co.uk/partno_STBT027 Sorry should have said earlier ... oops!

@metalwright 6 лет назад

Sometimes I really try to figure out how to build another garage at my place... A standard 3 car just doesn't cut it. Then I see these poor chaps working under a freakin' ISIS tent they learned about watching Survivorman...

@TomShorrock 6 лет назад

I'm guessing thats a compliment ? haha

@robindolan1117 5 лет назад

Hi mate is that an engine you have bought or have you done it up?

@SamplingPercussion 6 лет назад

Nice content. What editor do you use bro? I have a Shorty Mini I'm trying to get sorted.

@TomShorrock 6 лет назад

James Ulibarri I’ve been using I movie but I’m just recently landed final cut this week so I’m in the process of moving over to that 👌🏻

@ryanharriss7950 Год назад

😂😂😂

@blackvanandrobin6413 6 лет назад

Who s the glamorous assistant ? I like her nice long legs. Has she ever thought of wearing a wig ?...Great vid lads

@TomShorrock 6 лет назад

Robin Whyatt hahah! Cheers mate! That would be my dad 😂

@duaneaarts6768 6 лет назад

Thank you for not saying “in style”

@TomShorrock 6 лет назад

Duane Aarts haha you not a fan? 😂

@daniely4748 6 лет назад

Hi Tom ! I Enjoyed watching all your videos about Mini , and I liked allot this last video when you spotlight on the Different names for the same parts of a car (Between UK and USA) , I specially was confused allot first when I was searching for some part over Internet years ago ... I have a Group on Facebook I like that you come and Join us there and hope you don't mind that I post the Link here . Still waiting your next videos and how you will Finish this car Specially interested about how you will end the Electrical system connections' job . Thank You :) facebook.com/groups/127519529899 Or Group name on Facebook : ( Yeah I know we wright it British but I can't change it anymore that's Facebook's rules)

@TomShorrock 6 лет назад

Daniel Y thanks Dude! It’s feedback like this that drives me to continue with my episodes! I’ll sign up to the page now! Merry Christmas and a happy new year 👌🏻

@daniely4748 6 лет назад

MERRY CHRISTMAS !!! :)