Claw Grip Dream! - Sora V2 Review 

Yea it's kind of strange. I thought the v2 would actually just be an incremental upgrade, didn't expect the shape to change a bit

Ayy thanks🫡

Yea the sora 4k has a slightly wider back so it is a better shape for your grip. The v2 is also a little taller so if your hand size is average or on the smaller side, the mid section of your palm could also come into contact for relaxed grips.

Ok, thank you!@@cebbax

The width of the sora v2 is nearly identical to the atlantis mini. The main difference is the height of the hump with the sora v2 having a slightly taller hump that fills out more of your palm whereas the atlantis mini has a flatter profile.

Glad it helped!

The Sora v2 can definitely work here especially if you claw/palm. It's noticeably smaller than the DAV3 so it'll help with the size problem. I have slightly larger hands than yours and can claw the mouse with good palm support

@@cebbax I am a Razer Deathadder V3 Pro user. But lately, I've noticed that it's too big for my hand. My hand is 18.5 cm. The Razer feels swollen from the top, and it also feels a little bit big from the right and in length. I bought an ergo mouse because I use palm grip, but I think I won't use ergo mouse anymore. This introduced me to Beast X Max, Sora V2, Razer Viper V3 Pro, and Logitech GPX 2. They look very powerful. Which one/ones are suitable for palm grip and the size of my hand? I have an AMD 5 5600 processor and an AMD RX 6700 XT graphic card on my computer. I have a Zowie 240hz monitor. Will use the mouse with a polling rate of 4000hz or 8000hz cause glitch or lag? Which one/ones will come 4000hz in the box as a standard? I realize I asked more than one question. Thank you in advance for your help.

@@cebbax my firend sora v2 or vaxee zygen np-01s 4k?

​@@yasinarslan208 Thats a hard one. Np-01s is the best ergo shape imo but I'd probs still go for the sora v2 since the hump sits in my palm a lot better.

@@cebbax with my hand size as 185x105mm am I having any cramping or something?

Thanks lad!

Big yes imo. The g502 is good for general use but in terms of gaming, there's a lot of shapes that'll fit a variety of grips better. In this case, the sora v2 suits claw grip perfectly and is fine for fingertip

@@cebbaxI guess I will wait for this dongle to be able use 8k polling rate. I'm not sure but I don't wanna change 1k polling rate mouse (g502x) for other 1k polling rate mouse which is sora v2.

@@KANCIAPAGAMINGROOM Thats completely fair enough. You'll also most likely run the mouse wired on 8k because of the battery life since 4k can only give you 1-2 days of use before charging. So depending on how important going wireless is, you might simply use 2k pretty much as your standard instead. Still I'd say swapping out of the g502 is a good idea if you're leaning towards gaming because of other factors like lighter optical switches, weight and better shape.

@@cebbaxI need precise one thing. Sora V2 selling right now without this new dongle works on 1000 polling rate right? I'm asking beacause some reviews says that it works with 4000 polling rate without this new dongle... I'm totally confused.

@@KANCIAPAGAMINGROOM The mouse by itself will only run up to 1k. I got baited as well because I saw the 4k option but its greyed out so you can't use it. You're going to need the new dongle if you plan on using 2,4 or 8k

Beast X mini 100% assuming you don't have hands that are too large

Nah ninjutso only used the same dongle as the sora 4k. The options are greyed out until you get the separate dongle. Wish they just didn't show it in the software, had my hopes up for 2 weeks

So that means the sora v2 has 4k dongle same as sora 4k?

Sorry chief, will work on it🫡!

Nah that's mb. I saw the 4k option available but greyed out so I thought it hadn't been released yet. Only 1k with the dongle provided

@@cebbaxYeah I'm pissed. After i pre-ordered this mouse i found out it didn't come with the 8K dongle, i thought Ok, the last model was 4K, i'm happy enough with that, only to learn from another video review its only a 1K dongle WTF 🤬 I would Not have ordered it had i known it only ran at 1K. 2K would be enough for me if implimented well. The higher polling rate matters much more when you're already at a disadvantage for other reasons such as slow net, high ping and packet loss, playing on a laptop with external monitor as well as peekers advantage in R6 Siege. On top of this i'm deaf in my left so though i can hear the footsteps coming closer, i can't tell the direction the player is coming from and rely on seeing them and reacting as quickly and accuractly as possible. I need as much advantage as possible to compensate. If the lower polling rate and packet loss means that my click on the right frame doesn't register even though ive made the shot then i could die even if they would otherwise have shot me after i have already got the headshot.

@@MaZEEZaM 100% agree with you on the dongle. I do believe polling rate doesn't play a huge impact on performance overall but in your case, it makes sense to do anything for an edge. I would still get the mouse since its 100$ compared to others that go for 120$ or more but it would've been a power play if they had 4k at that competitive price point. Its already become a standard for higher polling rate and companies are already chasing after 8k so I reckon it would've been lit if they included it as a complete package. The other odd thing is that their older 1k mice used standard usb dongles. The fact that the 1k dongle for the v2 is exactly the same as the sora 4k lowkey seems misleading.

Yea I've tried both but turning on competitive mode will disable motion sync

@@cebbaxoh I see, do you have competitive mode on in your day to day use?

@@Jerry-ex5hy Nah I tried it for a couple of days and switched it off. It kills the battery too fast and doesn't make a difference on 1k. I'm already charging it every 2 days at max so Idk if its even worth using it after getting the 4k/8k receiver tbh

@@cebbaxwhats the battery like without those settings on?

@@Jerry-ex5hy With only motion sync on, I'd have to charge it roughly once every week

Most countries will have no problems pretty sure. Check your local retailers and see if they got it or through ninjutsos website

If this was the sora 4k, I would've said its completely fine but the v2 is too claw-centric to recommend as a fingertip mouse. The shapes actually decent and you won't run into any issues with your hand size. The tapered sides with its relatively steep angle is the factor to consider. Do you grip with the side of your finger or the tip. If your contact point is the tip then the x2v2 mini's flatter sides would be a better choice. In regards to the qc, I have the x2v2 mini, x2h and xlite v3 and all work great though pulsar mice usually have problems during their first 2 months of release so you should be fine now. Still I would buy from places you can easily setup returns just in case

first of thank you for you respond. so my thumb, pinky and my ring finger are touching the mouse, the middle and index finger are only touching. ovrall i would say there are touching the mouse and NOT just the tip. BUT i didnt test any other mouse than the gpx shape so i dont even know if i like claw grip. Can you recommend any mouse wich fits my grip style ? @@cebbax

@@lev0x Tbh I would just stick with the sora v2. The angled sides definitely wouldn't be the most comfortable thing to grip if you were just using the very tips of your fingers but that doesn't seem to be your case. This mouse could be a good chance to try using claw and broaden your experience on what might suit you the best. If you don't like how claw feels after using it then you can always just fall back to your own fingertip grip since the sora v2 shape and size is actually very nice

i was thinking about getting the pulsar x2v2 medium or mini but im gonna stick with the sora v2 then @@cebbax

No, definitely less than the atlantis mini

@@cebbax ah ok but more than sora4k? i cant seem to find any comparisons showing the side

@@inspire1ove Yea even on eloshapes they only have the top profile which doesn't show if a mouse would taper down but the sora 4k is a borderline flat sides tbh

Haus Gaming has tests on this and click latency doesn't see a huge performance gain from higher polling rate. You'll get at max 2ms faster clicks but that is negligible even in an isolated environment. The extra sampling improves responsiveness and smoothness of your mouse movements across the screen

Ye its 1k only, the dongle looked like the sora 4k one and it had 2k+4k but greyed out so I thought they'd be available in an update but nope

A couple of days ago tenz was seen plugging in a ninjutso dongle but he's most likely just trying all sorts of mice regularly

your review was a waste of time. i love my sora. just 2 scenarios away from masters complete and that thing makes it so much better on glass.

Tenz uses it 💀

@@Phylized tenz uses everything

@@michaelschwarz5907 he mains the sora v2 tho

Ayy thank you man!