CLEAN YOUR GPU (in 10 steps)  

Step 11 pass out from the fumes.

The moron wet the chip again.

Seriously guys don’t try this

Maybe you should have a look at the WHMIS sheet for isopropyl before you use it like that. If you like your health that is.

This was posted on my birthday!

How in the world did Linus miss that step is beyond me.

I'm waiting on the Extended Snyder Cut of Linus dropping it multiple times.

Drop it like it's hot.

-insert song played from that old youtube vid with yoko lifting her shirt clickbait thumbnail named 'when I'm bored'-

happy to be the 1k like here

This

I was gonna say ….

My anxiety the entire video was through the roof bc of this

​@@inzanium why?

@@doctorbright6946 he was scrubbing pretty hard, easy for it to break off

Step 1: Choose proper tools. (like a brush with appropriate bristle strength)

@@SacredMilkOG even tho, gotta be careful of bristle getting under components and getting stuck, resulting in them being pulled out anyway XD

It's okay, they give you extra just in case and to jack up the price.

step 12: snap it into 2 and buy another by emptying your wallet

For real. There's some 0102s holding on for dear life in this short.

I hate when that happens.

@@feakhelek1 ikr, that weird ass red black stain on heatsink....

*This tip is only applicable in temperatures of over 300 degrees Celsius*

good thing to do is also get rid of dust by using a vacuum cleaner

@@CreeplayEU even better, throw the CPU in a body of water. REMINDER: The chip has to be powered while you do this.

@@CreeplayEU i actually do that

Cheers bro I done dun it and now my pc won't work.. 😒

You should never use a washing machine to clean delicate electronics! The tumbling action is too rough. Always use a dishwasher. Comes out sparkling clean.

Aye dokkan!

@@notsurt Yep, dishwasher FTW

Make sure to put it in the dryer too!

@@Instabruh.User.. no

That would explain a lot tho

Isopropyl alcohol isn't really dangerous to inhale a bit of. Spray paint uses oil based distillates and is immediately cancerous.

Based pfp

Mine identified as a singing soundcard afterwards.

Hope it doesnt stutter the frame speech

AKA: *DEFICIT!!*

yeah he didn't say that you have to wait for it to dry

@@sgas Yeah, otherwise this is the safe way of doing it, I use the dishwasher.

Exactly.....

step 12: throw it in the trash

...Chilling

@Iamplant17 bing chilli

For real though bing should close the doors

​@@sixpathwhy? Bing is better

​@@laycey 💀 u kiddin'?

😂😂😂

Alright imma do it outside thx for telling me

That was funny!😅

Ahahaha

Sigh, I don't know my real father and my adoptive one is dead. So... what's new with you?

@@Instabruh.User.. KNOCK IT OFF, NO ONE IS GOING TO YOUR CHANNEL.

@@tdata545 it's a bot. Why are you replying to it

Father: challenge accepted

@@Instabruh.User.. you have no content noob

It has around 326 dislikes right now (UTC +0: 09:43)

@@guffyscotland9605 how can you tell for shorts? 👀

@@AaronChristopher869 On PC it shows like a normal video (with the chrome extension)

@@Kigoz4Life Return RU-vid Dislike

Yeah, but unsubscribe still works. I'm going there now.

more like open box lmfao

• Recently cleaned and repasted

Exactly. Alcohol is still conductive liquid. It will fry everything if connected to electricity.

@@culturecanvas777 not to forget flammable

and only use pure isopropyl alcohol.

Thankfully its hydrophobic so it vaporize very quickly so it should be fine before you instal it as long as you don’t rush :D

Oh, so this video isn't a joke?

@glenMarko exactly

Step 7, don't spend a couple of 100 dollars to tell the truth.

Ikr, everyone should start SMD micro-resoldering the components of their GPU so the bonds are stronger, it's so much fun~

rest in peace to the transistor for k and L keys that snapped off the pcb of my keyboard while i was wiping it down. Got the special glue and fixed it, worked fine, but when i tried to plug the cable into the pcb 2 of the wires snapped and the transistor got scraped off... again. Its been sitting on my table for a month.

@@funnyarc doesn't that not really do anything tho ? If I'm wrong please provide some evidence bc I would definitely do that. I basically have a fetish for applying time care knowledge and precision into my tools to make them better instead of paying more money for better ones, or something like that. Hence I'm rocking an R9 290x with liquid metal cooled die. I would definitely do it if there's any evidence that it does anything lmao I was under the impression that there's only 3 real states for solder joints: attached, not attached, and bridged/shorted. Thanks in advance Edit technically the joint could be attached but nonfunctional due to corrosion maybe I guess lol w.e educate me pls

@@pinnacleexpress420 You realize doing that would cost tens of thousands of dollars for a machine right?

It's fine to do...

But its literally how you clean electronics. My keyboard was saved like this 3 times already and still goes like champ. Any non metal brush wont damage anything even if u go ham on it and isopropyl alcohol is literally designed for electronics. It evaporates instantly hence the fumes comment in video.

@@keldon1137 Logitech?

@@tanmayrai2003 Nah, corsair k70. Always drink spilled on it, i swear its a magnet.

@@keldon1137 damn 😂 I have a Logitech k220, really cheap keyboard but that thing's lasted 6+ years with me and it was second hand

Oh oops, I thought this was genuine

Bro this was uploaded on March 13

I'm seeing this for the first time in June.

you can't even see the date lmao

@@alyx6427 yes you can, click the 3 dots and check the description

I found this so-called "GPS", will this work?

@@Mgames_xd yeah they are very similar you can use it instead

@@Mgames_xd yeah i use google maps, gives me about the same performance as a 3060

I think you can download one off the internet

@@thatonedog819 along with some ram

how did it turn out?

They wont usually come off unless you scrub like really hard or it was loose beforehand.

@@fffUUUUUU From having personally scrubbed my GPU with a toothbrush, I would agree that they don't really come off that easily. For context: I had to clean my GPU so I could mount the EVGA Hybrid AIO on it.

@@fffUUUUUU Another person chiming in who has done it, it's not going to knock anything off, not unless you're using a wire brush.

@@fffUUUUUU ?

@@autumn5592 correct, I had two Arctic AIOs on a crossfire setup, and went back to stock coolers in 2021 when they failed. This method works with a toothbrush, but I was admirably more delicate than this video shows. Was mostly thermal silicon glue to remove.

List it on eBay as slightly used

@@tocrispyay yall need to stop. I'm eating 😆

Just throw it away

Make sure you don’t recycle. Straight to the landfill.

@@tocrispyay off brand Nile red 😭

@Xander Werdon actually after cleaning my gpu I went from 8 gb of ram to 256 gb

@Xander Werdon congratulations, Joke went straight over your head and now you look dumb

@Xander Werdon What are you gonna say next, that electroplating my entire motherboard with gold WON'T increase my data transfer speeds?? 🤣🤣 You're a funny guy

Do you ok?

hope ya get better on it

Wuh oh

He does have the best tip… oh tech tips. …. Nvm 😅😂

Why would you clean a brand new GPU?

NOOOOOOO

@@Kovac_ You have to wash off all the dangerous chemicals from the factory before you turn it on.

I wouldnt be surprised if someone tried this out and then blamed linus for their broken gpu...

I got the Crimson edition soldering nubs now, thank you!

I tried that but the crabs got ahold of it and won't give it back.

Never do this... Water logging the PCB is a bad idea. The alcohol is perfectly fine as it evaporates quickly and doesn't absorb.

resting it by the beach is really important because everyone needs a vacation

@@Instabruh.User.. Let me guess, you use the alt account to hide from the shame?

@@eddiemate Oh it's ok, We'll just introduce them to ThioJoe's Spammer Reporter Software real quick. Also another cool video to check out=]

@@fredmichel623 It's actually a bot not even a person.

yup apu is da wae

just buy a GPU ,its not hard

@@moduchanyu137 DA WAE!!!!

I have a 3090 and a TR4 3990x. Also a 2070 (had two of those and sold the second to my friend for $700 it came with a whole miniITX build by MSI, it was in the Trident). I even upgraded his 1TB to 2TB and fresh installed windows on it getting rid of MSI bloat and that annoying partition that split the 1TB into two 512s. Apparently I could have just installed it on the back of the board since there was a spot for a second NVME. Oh well. I don't screw over my friends, it was technically used tech, so he got it at a used price. Also, he gives me a lot of free Veterinarian advice.

@@tdata545 dint ask

Canned air spray alone is superior to this. Such a massive waste the way he has done it here, nobody should copy this ever. Not to mention he wasn't wearing eye protection, and forgot to tell people that if that stuff goes in your eyes you will cry like a lady who used to be a man.

@@DailyCorvid if someone is dumb enough to get isopropyl in their eyes, well.... they deserve to have isopropyl in their eyes. They just deserve it, and maybe that will kickstart their common sense.

Why? That does nothing bad to it.

@@DailyCorvid Wtf? Is it because I have glasses? I've rinsed things in it and never had this happen.

@@n646n Cheaper, easier to handle, less likely to damage soft materials, doesn't conduct electricity... There's tonnes of reasons to use air not liquid man it ain't nothing to do with what you wear on yer heed;

But I only have one bottle!

91% so you dry out the plastic and melt away any rubber based glues

Stop it.

Too bad it's not drinking alcohol, otherwise it would be more fun.

Linus sex tips

Isopropyl alcohol does not harm Electronics

The brush would damage it if it has The metal brushes

i did on my 3080ti it still worls

@@jbshah394 it worls!

It would be good to compare the performance

Isopropyl alcohol is safe as long as its above 90% and very commonly used to clean electronics. This video isn't a bait they just made it funnier for the lols.

this is really is the best way to clean motherboards and stuff because it evaporates extremely quick and is good at removing gunk and corrosion anyone who solders uses flux to help it flow n best way to get it off is to use alcohol u don't even really need 90% as long as it dryes all the way when done before you plug it in.

Not Ethanol, Isopropanol

Ethanol is dangerous stuff man, you're lucky to be alive.

@@richardsmith9615 Eeh... No worse than drinking half a fifth of vodka. It's not methanol for it to be truly dangerous.

@@thaaat_one_guy My country either doesn't import/manufacture it or it's so exceedingly rare that it's basically a specialty item and it's not worth the hastle to track down. 99.9 percent of electronics cleaning here is done with varying dilutions of ethanol.

@@margyoan97 You're right, my mistake, I was thinking of Methanol.

If you want a clean gpu board, then yes 😊. Old thermal paste and pads should be removed 100%.

@@BaMbOoZeD 🤦‍♂️

@@V0V50 🤣🤣🤣

@@BaMbOoZeD It will make your gpu so clean that has 2x performance

@@V0V50 Ofc, like a clean slate 😁

That's scary...

I have to agree with this. Jumpers might get pulled off.

@@culturecanvas777 lol

Nope.

Yeah the main thing was he used thermal putty which you can run it through like 10 times in an ultrasonic cleaner and it will do nothing. If you really want to get the crap off. This is your best, but you know who the hell uses thermal putty.

Hey, I get that reference

I understood that rererence