Cleaning A Holley 4160 Carburetor | Inboard Marine Carb Care

Подписаться 3,4 тыс.

Просмотров 68 тыс.

50% 1

We're going to show you how to clean out your Holley carburetor without having to rebuild it. Get all of the dirt and debris out and check for any water intrusion in your 4160 Marine Carburetor.
Make your Holley 4160 Carburetor run like brand new so you can hit the water wide open!
Don't worry, it's not that hard. Vince walks you through the whole process in this video.
Check out all of our PCM and Indmar inboard boat parts and accessories here:
skidim.com/engine.html
Get a new Holley marine carb here:
skidim.com/4160-carburetor-4v...

Опубликовано:

17 мар 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 37

@tylerhutchinson3646 14 дней назад

I bought an 84 Bronco out of a junkyard. It has a Holley carb. I mainly have worked with Edelbrock carbs. So this video was very informative. Thank you.

@XSAILOR65 Год назад

I installed a new fuel pump(carte P4389...) on my engine, PCM 5.7L, and when the pump primed, the carburetor was flooding badly(engine not yet running), guess the pumps pressure regulator was possible faulty, pushing way to much pressure. Wonder what parts might hav been damaged in the carburetor(Holley 4160)?

@Psychobilly 3 года назад

Yep, Vince is the man!!

@jkline999

I did what you did... thanks. except the gaskets were glued on... that took two hours to clean off.

@jaykay8570

Thanks. I see the secondary is missing the metal plate and the gasket... I guess with the blue gaskets those are not necessary, from what I have read.

@robert3325

Hi vince, I've got fuel pumping out or the breather tube on my 350 holley Marine carby about 6 seconds after the motor starts running, it flood's out steady and stalls the motor. Can you please advise. Regards. Rob

@thomasjohnson6616

I have a 4160 with a few years on it and must scrape stuck on gasket off with razor blade, now I have tiny bits in the metering holes if the carb body, I'm concerned about plugging up the circuit with this debris any advice on how to avoid this would be appreciated,

@slalomking

What torque do you put on the fuel bowls ?

@albertadelrosario9178 2 года назад

Thank you Vince! Done a great job! Got idea now about my carburetor! Anyway got done ✅ on my whole new stirring system in my 89 mastercraft pro star 190! with out a problem! Tell your manager the Fili peanut 🥜 🤣 i said Kamusta ( hi 👋🏻) I’m a member of the Redneck Yacht Club 🤠with 629 members!

@EristiCat 3 года назад

Thanks for the video. Gave me the info I needed to do a small Repair on my carb.

@BertLangdon Год назад

Very helpful video, Vince. Thanks for posting.

@aubreywisby2849 3 года назад

This guy is awesome every time I call him he’s more the happy to help me step by step. ” I’m the guy from Louisiana” haha. Every video he’s made has help me threw ever step on my boat. I just now follow this video step by step to change my carb bowl gasket and metering gaskets I recently purchased from skidim even though it was a flooding carb fix

@billsmathers3021 2 года назад

Thanks Vince! Good instructional video and a big help with the carb clean up.

@jkline999 Год назад

thx vince. great vid. My carb on my '95 vortec only starts with starting fluid now. Guess it is time. Intimidating, having to strip it all down. Biggest challeng for me will be getting it tuned when all back together-- haven't messed with carbs since... 1995!

@sparkyrevenge Год назад

Thank you for taking the time to share your knowledge.

@davidmcmillan343 Год назад

Nice job and good explanations on what, why and how. We have a 1950 Chris Craft U22 with a 1972 215 4bbl and my new Holley isn't streaming fuel into the first two ports. I am going to try your cleaning method. Please keep making useful marine videos. Thank you, Vince.

@michaelkatzberg127 3 года назад

Fantastic report there Vince. Two thumbs up.

@jamesjordan1979 2 года назад

Great job Vince!

@TheThirdWheel618

That's a happy carb 😊.

@thorodinson7739

thx for the good explanation video, one question. in my rebuild kit is a black SECONDARY METERING PLATE GASKET Holley PART# 108-27-2, does it belong betwee the plate and the blue gasket?