Clearing one acre of trees and underbrush 

I'm a mechanic in New Zealand. We had an audi v6 car that bust the high pressure line from the power steering pump to the steering rack. We had a hose made up by the local hose doctor and fitted it and it whined really badly. The customer said it hadn't been whining before. the only thing we had changed was the hose. We found the old hose and compared them the old hose had a zig-zag strip the full length of the hose . Its there to change the harmonics of the oil in the and absorbs the whining noise.

John you are so lucky to have such good employees that do good work even when you are not there.

John, about your noise. I am no equipment expert, but I do know hydraulics. You taken the cutter off line so thats not the noise. It sounds like a bad bearing in your hydraulics pump. The bad bearing would not make noise with no load. You do have a noise with a cutter load.. Hard cap the hydraulic lines to the cutter and see how the pump sounds with the lines blocked. Put some pressure on the pump. Good luck. Great show and really enjoy how you all work togeather.

Both of these pieces of equipment and the operators are doing such a great job.

Hey Guys, Rod from Greenville here. I drive past this corner several times during the day on my route. I was thinking that looks like a job done by Upstate Brush. I must have missed you or I would said Hey. Your work sure speaks for itself. Thanks because it was always hard to pull out on Floyd due to the brush. I see you somewhere soon.

Always a pleasure watching the group and the machines in actions.😅

Took all of a few seconds to realize that your hearing will be bad like mine if you don't start wearing some hearing protection, that machine is is going to give you Tinnitus.....

Great job Josh and John looking good can't wait to the next video

John , high pitch whine starts when high flow is on, seems like it would be worth asv checking a restrictive hyd line (maybe to small) or a inline screen or hyd filter . The new 130 pump may build more pressure in those same size lines then the old 120 pump. you could also turn your gal per minute down to confirm if whine gets softer it is restrictive hyd line or turn up whine get loud same

I like how you guys leave a buffer/barrier strip of vegetation between your working area and the main highway

Re watching to reminisce the days with the old "A" team......miss those guys . I miss the ASV and fecon too. Oh well, time marches on. Great videos !........👍

Upstate bush control you rock as always. Love an light from South Africa 🇿🇦

Josh is always so happy. It really helps us to enjoy the video seeing your team take pride and joy in the work they do each day. You got a great team!

It sounds like a bearing, I had one go on the front wheel of one of my car's, sounded just like this when it got up to speed. I see the no rubbish dumping signed are as affective as they are in the UK. 🤗 Nice to see everyone out and earning money, nice job 👍

Wingsandbeaks here from Oklahoma ~ I have missed your channel since my iPad was stolen and finally found you. You guys are great! I pray your health and well being is lining up with God’s Word, nothing missing, nothing broken. Shalom.

I have been watching you for over a year now I love how you make it look not like the guys who use a brush hog and leaves all the stubble everywhere your work is very nice

Good job! You gave such good workers.

Another great watch, could hear the disappointment in your voice regards the noise, 🤞 it will all come good in the end and you get your smile back 😁😗

MORE PLEASE. my day is made when I see your videos drop!!!!!!!

Hey guys you really good workersI know this is so hard dangerous. God-bless you👍

You guys do great work

Hi Jon, another great performance from your guys, the transformation even at this stage is staggering. I know absolutely nothing about skid steers apart they do a tremendous job and I would love to drive one. On the matter of the wine you are experiencing, I think you've got to put that down to the individual characteristics of that model. Clean up and on to the next one.

Great job. You surely increased the value of that property. Have a great weekend.

Mika seemed as happy as a stunned mullet walking pass then. I think I will call him Mullet Boy from now on

Shot in the dark! bubbell test tubo connections with soapy water!!!!

You guys are still at it! Haha I wish I was there to have fun with you guys, I know it’s work but being outside is a plus!

All the crew did a fantastic job on this piece of property,I’m amazed how much difference it changed the looks.neighbors probably complain about it looking to nice,shows up all the houses and other property.on the machine let the experts go over it as many times it takes and still not to your liking,tell them you want another machine.if that makes same noise.that means it’s all in your head,uh huh.that’s the problem LOL.keep doing your thing and carry on.always could get some stress relief and shoot at it.just saying that’s an idea,then worry about that later.kudos 👍👍👍😎😎😎🌲🌲🌲🌲

I wonder sometimes how on earth is this going to be cleared - not a problem with this experience crew that's for sure. Great work guys.

This is so satisfying to watch.

Great job y’all! Upstate Brush Control Crew rides again!!!

Hey John first I'd say you and crew work fantastic together workmanship and passion are well defined. Your issue is conneticly integrated into the parts supplied by the manufacturer. For example I BOUGHT A MACHINE THAT STARTED TOO SMOKE OIL NOT LONG AFTER IT WAS BOUGHT. THE DEALER HAD TO COMPLETELY BREAK DOUN MOTOR. THEN CALLED THE MANUFACTUR OF MOTOR TO INSPECT THERE FINDINGS. TURNS OUT THE PISTON RINGS WERE PUT IN UPSIDE DOWN LOL TALK ABOUT A MOSQUITO SPRAYER.

Trust your gut feeling. Time in the seat gives you the right to an opinion about what is correct in a machine.

I can appreciate the constructive criticism about your new ASV, you've spent hard earned money and you want to ensure that you are getting what you have paid for; much respect to you and the team. I've definitely been in your shoes before, keep up the great work though!

Your new ASV 135 seems to work fine. I heard the noise.... and it could be a valve in the new higher flow pump not yet registered to your existing cutter. It will work out in time. Best wishes.

Hey bud I was just watching this video and it reminded me of a time. I had a close friend chasing a high pitched vibration noise. He thought he has a real serious issue and it exes up being just one loose bolt on a skid plate. Sounded like the whole machine was coming apart and had us scared to death, but it was just the belly skid plate vibrating.

Hi Josh, I am beginning to be a fan. Been Following you guys for about a month now. Think I have seen most of the videos. I will be ordering a hat next month

Man, y'all doing one heck of a job. Stay safe!

John, That hydro pump is on it's way out. That whining noise would drive me nuts !!! TMP from N.J.

대단한 분들이세요. 장비도 어마어마하고요 최첨단의 장비들인것 같읍니다. 가숨 이 다 시원 합니다.

Nice job enjoying the channel 👍aloha 🌺🤙🌺

......lookin' great, nice work, keep safe..

I want one of those!

Looks great

Hello my pro crew how's everybody doing John I heard someone got married in the group I know I've been away for a while but I had to get my health right I've been sick and I've been down but I'm still here by the grace of the Lord I'm still here and y'all still my number one pro crew that I will never forget y'all are the hard working is sweetest intelligent fellas that I know and I love watching y'all work because my crew the pro crew gets it done right and I will never stop bragging or telling anyone about y'all because I love the way I work I love how it looks when you're done everything but I'm okay I'm doing fine and I just had to get back on here to let y'all know that I haven't stopped watching y'all or anything I just wanted to let you know that I'm still here with my number one pro crew That's Josh really Micah and the big boss John I love you all take care and y'all have a happy happy holidays imBama Queen Victoria Byrd.

Wondering if when CCE checked the unit out, they possibly overlooked the little things, such as lamps, rubber isolators. It sounds flow related

Got to get you a brush hog buddy!

Great machines.

John, you don't look too happy. You're pretty down on this one. Brand new machine. It's making noise. I suggest you wear headphones until you get it fixed because that noise will drive you nuts. I hope you get it figured out soon. 👍👍🙂🇨🇦

Hey John just saw your newest video and I was reminded to send you this message because of you guys having to find a new home for your business. Isaiah 43:19 🤙🏼 & Jeremiah 29:11-13🙏🏼❤️🤙🏼

Hello Josh ! You're a handsome man !

Really looks good

Nice job guys.this new equipment seems to have more issues i have had issues with my new 289 cat hopefully it gets better.

Condensation in the hydraulic system turns into a vaseline like substance which clogs filters and screens and causes a whine. I been there and done that. Good luck with it. Phil Thompson

Nice job !

That whining sound in the hydraulics is possibly a worn swash plate on the variable speed pump.

I do hear it faintly,I would have to be in the cab to locate it. But I believe like you said John,that it is a pump,and you are just not use to the sounds in this one.❤😃

super video,bon job..

Jon, my first thought is pump cavitation. The suction line and/or screen is not allowing unimpeded flow to the pump. That will tear up a pump. Also, reduced oil to the pump will result in lower power.

ill be watching

Hydraulic pipe unproperly holded. Need stronger rubber pads or changes in RPM and pump settings. Get dealer to look for vibrations with bespoke sensors on steel pipes. Nice video as always. Good luck guys!

John, having worked on and around equipment many times before, it seems to me that the whining you are hearing is coming from improper bearing tolerances in the pump. It really shows up under high rpms. It possibly could be a faulty bearing from the factory. I would stay with it while it is under warranty. The noise will only grow worse with age. Great job however on the video. There is always something eerily satisfying about watching your videos. Please keep them coming.

Greetings from Hamburg/Germany

Just need to hang out hour of this on my land just buying and rent this machine toy are 300$ a day its too much but look fun and easy 👍

hello upaqstare bruch control it's is randy and i like yours video is cool thanks friends randy

Great video

Youn say you set it up to run with the (CPU) it sounds like the setting are not right, and the pump is trying to pump more oil than what you need ,cutting it back to 43 might be the problem. Check and see if you can cut the flow back like that sound like the pump is stressed out .

I bought 3 acres of ground that had2 acres that look just like that except Had sycamore trees no fun to cut down Because they are very heavy! I clean it all by hand just little compact tractor An a harbor freight trecher for holes to dig to push things into to bury It's taken about 3 summers so far Almost done Now stumps! That don't want to burn!!! What do I do now!!!!!! An the neighbors Used it for local dump see way the holes Plus had about a good size dump truck Load of shingles on it to

Always good job

About the noise, I have a similar situation with an old Mustang skid steer. It ended up being 'hydraulic aeration' on the suction side of the pump caused by seal leaking under high load and flow. I noticed slight reduced power when the noise was going on, but we didn't see aeriated hydraulic oil.

Love you content. Ever do a breakdown of what it cost to run these machines per hour. I imagine $50 a hour for gas , cutting blades, and maintenance will get me in the ballpark. Then I have to add my time and the payment plus depreciation. So I assumed you have to somewhere in the $300 a hour range to make this machine profitable. Let me know if I’m within the ballpark.

Good job

Pump cavitation? We use to run Komatsu excavators. If there was no pressure in the hydraulic tank. 8-10 PSI the pumps would howl like this. That little bit of pressure would help feed the pumps.

What a mess but you and your crew gotter done

Sorry John, know nothing about machines. Hope you find it. Anyway, good to see the crew back ! Be looking for Part 2. Thanks guys. Be well.

That sound would drive me crazy!!! Hopefully, they will come out very soon and get it fixed for you. Terrible!!!! J.R.

Save SOME 🌳 TREES!!!!!!

I think I can hear it in my head phones, but if I turn down the volume it isn't so bad. Perhaps you should wear hearing protection.

That soud would drive me crazy

23:55 23:58 Turn up the radio really loud the sound will stop. Ok joking aside deffently sounds like hydrlics. I remember cnc mills would make that sound maybe the lines are too small for the pumps pressures.

Sounds like the hydraulic pump to me! I had the same issue with a Bobcat several years back

Are you sure the whining noise isn't coming from the operator's seat? ;) "I love the sound of machinery in the morning!...it sounds like victory!"

very big project , would have been nice to see it from above with a drone.

John, the extra noise is coming from the pump,it could be the design of the Yanmar pump since they took over CSV, Chris on let’s dig 18 new Yanmer 55 seems to me has a extra amount of whining coming from the machine. Hope this helps👍

That noise would drive me crazy! I can fully understand what you mean. I think its the hydraulic pump itself, isnt it?

There are two separate whining sounds. There is one that sounds like an air-raid shelter sound that followers activity and then there is the working high-pitched sound. Air-mix ratios? Do you use air to cool the machine?

John if it that much of a winning. Start with the Belts, Fan, Alternator or its a Baron gone Bad. Rubbing of metal parts won't make a Winey Noise. So it is something that is Turning very Fast.

I don't have experience with to many skid steers but sometimes machines just have whiny hydraulic pumps. If all the diagnostics say it's fine and you have it documented about the noise you might have to run it and wear ear plugs. The Ventrac you had also had a whiny pump that the redesigned 4520 has a different pump now to.

Check your hydraulic reservoir, for froth in the oil (lots of air foam), which would be indictive of a loose intake pick up line. I am inclined to believe that a intake line is sucking air. The noise sounds like cavitation

My husband found out it was our pump making that same noise as your asv135 they replaced ours with a heavy duty one the noise is gone now.

It looks as if Willie (I think) is having a riot. Lol

Amazon and Auto Parts stores sell Automotive Stethoscope Engine Diagnostic tools. They start at less that $10 to $400.00 A big part of fixing a sound problem is finding it. You need some good noise canceling hearing protection too.

It's a mechanical goat.🚜🐐

Just saw you talking about the ASV so here’s another one 😁 Colossians 3:15 love you brother 🤙🏼🤙🏼

That sound you are hearing? you might want to check on the roller bearings on those blades. It might be coming from there.

Goodmorning all

WASSSUP JOSH!

john that thing sounds like hell us the old 1s

You moved a tire with the excavator? 😂 But seriously I'm curious what equipment you used! I would love to know what attachments you used and models? I want this to be my job.

That seems like a lot of wood chills and scraps left behind. If this was cleared for a place to build a home, how would you go about cleaning all that up?

Sometimes, I stress sometimes, the quick couple connection can be faulty in either the male or female side of the connection point, can limit flow or set up a turbulence in the flow of oil, I have experienced this in hydraulic systems and it drives you nuts trying to track it down. Just a thought sir, thanks for the ride along, even with the screamin.