What's the point of the first one? The second one, can save time, money, and materials and just buy a pin remover, or use a screwdriver as many have done before. Then even further on it, just buy a paint mixer. Third one, cool, you put a cross cut in a section of bolt to screw it into some soft wood... that does nothing but have a chunk of metal in the middle of a piece of soft wood. Fourth one, yay! You bolted some white to some soft wood so that you have some wire bolted to some soft wood to yank on. Here's a "hack," tie some string to the head of a broom so you have some string tied to the head of a broom to yank on. And on, and on, and on, and... use a plastic bottle on your indoor faucet to fill the bucket? Yeah, having a bottle with water inside left hanging on your faucet is much more practical than buying a faucet that has a nozzle on a hose, screwing a hose to your faucet if you don't have that but have a threaded faucet, or, you know, using an outdoor faucet, your shower head, or your bath faucet. 'Here, law nails on a board, burn the board, and you fixed the problem with your AC unit!' What is that "hack" even supposed to be used for? The nail through cardboard, for people that lack the mental capacity to hold a nail. Just just using an angle grinder to turn a wrench into a limited range cat paw for people too stupid to use the claws on their hammer or cat paw.
there are more than a few of these that are down right clever. Then there are some that.... The tools used to make the "Handyman Invention" cost more than the invention itself, and if you have the tool to make it, you should already have at least 2 of the tool you're trying to replace. (or in the case of the wire strippers, a knife already in your pocket)
There are few that that known, like drilling wooden plank with plank underneath, but rest of "inventions" is downright awful. Why do anyone would need to attach box cutter to a plank if you can use it right away without any issues.
The thing with the wrench. I would probably just use my hammer. It already has this thing on the other end for pulling out nails. Try it. It works even better than destroying a perfectly good wrench.
Пир новаторства и наставничества! Накрыть банку с краской пищевой плёнкой - вот мой фаворит на премию "Фейспалм" в номинации "Сантехник Афоня втирает молодым за культуру производства". :)))
Yes, you can make do with the wrong fastener or tool, but it is always better to have the best tool for the job. I never regret getting the proper tool.
О, сколько нам открытий чудных готовит интернета дух... И Ютюба иже с ним... Не перестаю восхищаться полётом фантазии мастеров-фломастеров! Хотя, конечно, некоторые идеи очень даже ничего. Например, как на банку с краской напялить обрезанную бутылку.
I need to cut this wood but all I have is this saw blade amd a spare door hinge and some screws and bolts. Wonder how I can cut through this wood? 🤔😆 I'd say about 90% of these are really reaching lol. And there a much more affective and simple ways of accomplishing what he accomplished. But it made for a interesting and humorous video lol.
Now i know how to cut up all my snap on wrenches so i can pull nails....that damn hammer is just outdated!...and dad gummit i knew there was a better way than them extremely cheap and easy clothes pin!!....this stuff is hilarious!
@@Waldee84 Ive waited 7:40 and have so far seen ONE almost useful thing, not a single one of these are "clever" their are downright obvious or just stupid.
Funny I just came into the comments to say that for once, for my own home shop, there were one or two that gave me some ideas… lol… none of them as-is, but a few good source ideas… 😂
I don't know. Cutting up plastic bottles to use them as cheap disposable funnels isn't that dumb if you need to funnel things like paint or glue that would effectively destroy the funnel (or be too much effort to clean off the funnel). Not sure how often you actually need to funnel such liquids, though.
Lol I bet all you guys, when you don't have the right tools you just stand around with your hands in your pockets, your useless without the proper tools lol
Woooa this video is so awesome my friend 🥰 thank you so much for sharing it with us, your doing a great job keep it up, may the lord continue to bless you abundantly also with fresh inspiration, my friend stay safe and see you again soon 💐🔜🤍💯🤍💯🌹🤍
In all those videos I keep asking myself: what if I don't have an angle grinder? And in many of those, the angle grinder you need probably costs more than the correct tool you should be using instead of those hacks.
@@michaelunderwood5138 You mean more affordable options that are made to directly address a problem? These things require you to use tools to alter tools to change their given purpose...why?
A true handy man will have the correct tools to make the job easierand faster. Creativity is a staple in a hanymans arsenal. No matter what he will build or get what he needs if he doesn't have it. In a pinch you should never modify how a tool is designed to work it could cause damage to the job or could cause injury to persons or operator.
Take into account that all these should be done only in a pinch when you don't have the proper tools to get the job done some of these are down right redundant like the nut and bolt parts. 25 dollar set of wrenches.
Whenever you feel that you have to spend thousands of dollars to get the job done, remember the creativity and ingenuity you seen in this video and remember, it's 2022 and no one knows how the pyramids of Egypt were built, yet they were built 4,500 years ago. To the creators of this video, keep up the good work!
