HANDYMAN TIPS AND TRICKS THAT REALLY WORK 

Every home garage in the old days kept their nails and screws in jars like that it’s probably the first thing people would do. But nice hack to remind all how it’s done.

Half way good. This video became so much better when I turned off the sound

flame decorating your ceiling. fire completes the job.

3:16 No, don't staple in the middle of one of the large faces. Staple on a narrow edge, so that you can sand with the other face without a staple in the way.

Love the folded tape catching the dust from drilling hole in the wall.

Pls do more stuff like that! Never miss the new uploads

My Grandfather was doing the Glass Jar Trick in the 60s i rememebr and I still do it

Seeing a longer segment on the DIY solar panels would have been great.😢

Love this channel

Most hacksaw have square ends to turn the blade 90, even though the hacksaw handle was a good idea. The one with putting teflon tape on was good old hack but curious what would you put ona pipe that close to a wall.

The best tip is at 2:00 with tail lamp. Someone pulls hard and the lampshade breaks.

As a tile installer, that "coin trick" is the absolute worst way to have that crack and fall over time. rather than embedding it into the wall tile for support as its supposed to be, everytime they put even a little weight those quarters will wear at it because silicone is stretchy and will move slightly everytime. will just crack and fall and eventually be a repair bill

Not a coin trick, but a large washer.

The hacksaw would cut that screw without having to take the blade off. Zero points.

This one is now in my favorite list ! Don't over-Teflon ! Leave the first two threads bare. Add a little joint compound if you have it handy then don't over-tighten. Use Teflon on anything that needs to come apart again, according to specs, of course.

hello i love your videos!! I would like to ask you to make Hungarian subtitles for the videos. Thanks in advance!!❤❤😊

I was cutting drywall like that 50 years ago...and it wasn't new then.

Thank you, hugs from Ireland

Nice tricks 😮

The plastic bottle hack I use that as a funnel when pouring coolant or windshield wiper fluid (cut it in half or more with the cap.) Also, I've seen it used to bleed the brake fluid.

Hello, you have many good ideas, very good knowledge learning projects, thank you for sharing ❤❤❤

next time include the lead in picture i wanted to seewhat you did with all of those bottles

Drywall board hangers have been using that cutting method for at least fifty years

My grandfather used the hanging jar trick over a hundred years ago and are still in his house

Wow, using glass jars to hold small parts. Who would have thought? Well, someone about a hundred years ago. That idea has been around for like, EVER. It's not some new, genious idea. One heck of a lot of plumber tape. BUT, there are some really neat ideas.

It's surprising how bad a lot of these are as suggestions. 1. The pallet, okay so it's not really that bad in some situations, but it is probably the most material you could use to hold those tools and therefore not great, but go for it if you like it. 2. If sanding blocks are your thing, great, but look up the tri-fold method. I've found this simple method that requires no block works just great for any hand sanding that you are going to do. It seems to work better and be less wasteful than blocks anyway. 3. The tape/paint trick looks great until you see how much paint is in the channel afterwards. I'm pretty sure there's more paint in the channel by at least x2 than if you had not used the tape, which makes it a pretty sad hack.

All these ideas are for those who never held a broomstick in their hand and just spent the day playing with their computer.

Repairing the sidewall of a tire with those plastic screws they showed... is a horrible idea (I'm a ASE Mechanic). It'll flex too much, heat up and stretch then your tire opens up like a zipper.

I am almost certain, it is pointless to pull off a rear lamp housing on a car like that since the fasteners for the new one are on the inside. You would remove the interior panel, which is usually accessible, and then remove the old fasteners. To install you'd just do the reverse with the new lamp housing. All these tools really did with tape was take a busted-up lamp and bust it up more.

Please making Hungarian subtitles!!🎉🎉🎉🎉😊

Thank you for this video

Fire on the ceiling: Clever!

Feels a bit “5-minute” crafty!!😳

Hello, you have many good ideas. , your video is very helpful, thank you for sharing ❤❤❤

The saw as the laser magnet base was interesting.

Where was the intro compilation music cause I am pissed now that music is iconic

Wouldnt the soot on the ceiling in 1:25 just wear off?! Odd

loving the music; title please

2:40 LOVE IT! Too bad I just set a blaze 30 of them :)

It's weird how some of these are great ideas and some are just dumb.

The latch!!!

Dude fingering caulk on the trim would be sent packing On every site I've ever worked. If you cant work a caulk gun tip how the F$^k do to cope and mitre joints in plain view? Old timers would have shook that till i fell off then made me go move lumber for the afternoon.

if recycling plastics the cost is about 200% more , cheaper to start from scratch to make more plastic things, i prefer plastic over glass now, and a lot safer if glass breaks. I use marshmellow flush emptys, the clear kind with screw lids or peanut butter same size and 2 kind color lid looks neat too !

Some are really useful. But some are very funny

You do realize that the hacksaw blade can be rotated on its own handle.

AWESOME⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️

Using plastic jars is better incase you drop the jar, it wont break.

A translation for that rooftop thing would have been awesome.

I'll say the background music made this relaxing to watch.

This channel is what keep me going every day

10:10 securing a dowel.... waste time on cutting it 12 times, then glue it into the hole, genius, nobelprize worthy

👏👏👏

The first one. these tools have been arround for atleast 40 years

Lol, that’s a good one

Kérlek legyenek magyar feliratok a videóidhoz!!!😊😊🤗🤗🥳🤩

So are they not making new videos anymore? Because this and previous videos are just spliced together segments from previous videos...

👍👍👍👍👍👍👍👍

I want to suggest to run this even faster than what it is now. That way, nobody can get the slightest idea what this is all about, on most of the demos here. Less is more, dudes.... at least, if you want people to actually understand what is going on there.... and for some of the few that I actually saw long enough, like the Teflon on that bolt... well, if you put THAT much Teflon on it, it won't work, no matter what! So, there... keep trying! And for the circle drawing? Really? Why not just use the tape measure for all of them? Not fancy enough? Yeah, I thought so! My all time fave: the dudes doing the caulking and smoothing. Priceless! Only guys can come up with this hairy scheme! LOL

11:33 we'd use cardstock

wow

at 16:55 in, don't ever solder like that. It's a cold solder and will fail.

Great channel but you guys need some more music variety.

7:05 anyone know this track? Plz let me it'll solve my anxiety

like the videos allot. lots of usefull info but the music sucks a bit

i love how most of these are just doign stuff like their meant to do "new tip, you can use painters tape to.. not.. paint over stuff you dont want painted?"

👌👌👌

Using Plastic Jars saves on Tears and Messes

lol my grandfather and hung glass jars like that

These ideas are genius.

It seems the thing to do is copy stuff from 2 decades ago that aired on Discovery channel.

what is the name of this nice song 06:16-12:43

As an old Codger, some of these were around before I was born. These Video are good for Newbies tho... QQQ Why do you repeat some of the Content between videos ???

At 6:30 when you have such a horribly placed pipe like that, there is a thread sealant paste that comes in tubes like toothpaste tubes. Just don't mistake it for toothpaste whatever you do!! Apply a light coating to the exterior threads of the pipe with the male end. I will not get into the water or clog things if you don't make a mess and it is sold for plumbing too. Just use that instead of doing some sort of "life hack" to get into a difficult corner. It only costs a few dollars and you get nearly 2 ounces. This stuff will last a DIY home user a long time. I am not here to promote any brands and that is why I did not mention any. Just look in the plumbing section of your favorite store or plumbing supply store if you live near one (again I did not mention a specific one of either). This stuff is also not going to glue the joint and that way you can undo it in the future if you ever need to. If it does glue the joint you apparently did not get the kind of stuff I had in mind and that is not my fault!!

Instead of a coin. (11:00) .. it might be cheaper to use a washer...unless the coin is a penny. 🙄

Some tips were not clearly shown.

Please add full music playlist info in description

interesting. the music is horrid.

Good tips and tricks, BUT WHAT A TERRIBLE MUSIC!!!???

Hate it. I turn it off every time it comes on.

the cap screwed and the pot hagning onto it to put hardware is nothing new .. our grandfathers used to do it all the time,.

Get rid of the repetitive music!

The hype picture wasn't explained! They've did something with plastic bottles... A solar battery? A warming device? What is this?

HOLY EAR DAMAGE BATMAN!!!! Your intro breaks eardrums by BLASTING NOISE!!!!

These clips move way too fast! Slowing them down would be better.

why are people putting screws designed for metal into the wood? half of these videos are just laughable

it would have been nice if you had explained anything to do with the coke bottles on the roof...what was it supposed to do...how did they make it...anything like that. your pictures weren't worth even a few words.

I agree, I have to mute the sound because of the hideous music.

Well that was 20 minutes I can never get back

Dude no, As a locksmith do not do that stupid shit with the pen. Maybe it works, but 90% chance all you do is melt plastic into your keyway that now needs to be dug out. Superglue also does not work. Take it to a locksmith before you fuck it up worse. I promise you it's cheaper before you add superglue or plastic.

✨👍✨👍✨👍✨👍✨👍✨👍✨👍✨👍

Great video except for that annoying background music !

I watched the whole video to see what the stacked plastic bottles was about and you didn't tell us, I gave you a thumbs down because of that.

Pic is clickbait and is not in the video.

your videos are nice but the music is very annoying

Lost interest, 1/3 video screen is very annoying. Not worth it watching.

Really good tips/tricks, but the music/song...really annoying!

who decides the music for these videos?

99% solve problems that don't exist.

WTF is the Clown 1:15 doing??

The music is very annoying.