He's using a $350 pipe catch that auto locks and a $2 fitting to raise the pipe lol. This fitting works but with a lot of weight it may crush the pipe due to the way it binds. You could also make something similar with a torch and a flat piece of metal or use a simple pipe hitch knot with some rope.
Good idea but a more universal alternative I would propose would be to use a rope to tie a pipe hitch to your pipe - it will grip onto a pipe of any diameter and it can also be readjusted as you pull up more pipe. Plus you probably already have rope lying around.
Slip ring , i use one to retain a steel casing pipe with a diameter of 165mm. In this film a second one could be used to prevent the pipe from falling back in the well or drilled hole. A double chain sling works great too.
Pretty poor description of the pipe fitting. I have never seen a fitting like that at the plumbing supply. How do you seal the top of that well to keep it clean?
Well let the dascription trigger the imagination... it's something round with 4 bolt holes and a large treaded hole in the middle and found at the hardware store and if you don't use it for this project you can use two with a pipe between to hang your clothes on...And always if... you have a well and mess with it you use chlorine tabs or bleach when your done!!!!
This is what happens when you have no clue what the fuck your doing!!! I've been in the well industry all my life ,3 rd gen im 44 and this is just crazy
After the video was made I also cut a section of the flange to allow it to go on the pipe from the side. It was still strong enough to work to pull the pipe