Cloisonne enamel Ring full making process. Handmade Jewelry made by Sergejs Blinovs. Jewelry enamels 

Thank you for your comment!

Thank you for watching and for your kind words!

Antonmursid🙏🙏🙏🙏🙏✌🇮🇩🇮🇩🇮🇩🇮🇩🇮🇩✌💝👌🙏🙌

Thanks a lot!

Thank you! :)

Dear Ann, thanks for your lovely comment. Wish you all the best!

Thank you for watching :)

Thank you!

Marrylee thank you for watching!

You have an interesting story. I want to wish you patience and good luck. And thanks for your nice comment!

You are right - art deco is present here ). Thank you for your comment!

Thank you!

Thank you so much!

Thanks for your comment, it is very stimulating!

Thank you for watching! :)

Thank you for your comment! :)

I sanding the enamel with diamond abrasives, and at the end fire polishing. Try it, you will succeed!

Thank you so much!

Gracias!

Thank you so much!

Handcraft ORIGINAL items are worth the price charged, if people were educated about the process, you are correct, it is a dying Art. ❤️

@@kikicoast7921 You are so right. I am a silversmith myself (Nowhere near at this guys skill level) but so often am disheartened by people seeing my stuff and saying it's lovely but too expensive. Then they go and buy some expensive plastic rubbish from an exclusive high street store.

Thank you for watching :)

@@sergejsblinovs3369 🌹

Thank you. All the videos that I have I share on this channel. There are two ways to fix the wire, the first is when the wire is glued with a special glue. The second method is fixation with a transparent flux. I use both, it all depends on the design.

Thanks for your comment!

Thank you! :)

согласен )

I don't deserve this :). Thank you!

Yhank You!

Thank you for watching! For fastening the enamel piece I used a classic bezel setting. For grinding enamels I use diamond abrasives: diamond files and sandpaper. Grinding is done in a wet environment.

Thank you very much! You will laugh, but I solve the issue of ventilation simply - I open the window in the workshop :)

Everything is simple here. I grind with diamond abrasives and regular emery paper, but wet with water. And finally, fire polishing. After the kiln, the surface shines perfectly.

Not certainly in that way. This rolling mill was made for me to order.

@@sergejsblinovs3369 Real pleasure to see your work. :)

@@MrZimms950 Thank you :)

@@sergejsblinovs3369 Why? Better, cheaper, to use your money at a personal friend?

The process is the same. As long as the enamel is wet, it adheres well to any shape. For reliability, you can add a little "Fire-klay" to the enamel.

Thank you. Schauer enamels.

Thank you! I use Schauer and japanese enamels.

Yes you are right, I do not solder the wire, but glue it. there is a special fire glue. this is not connected with time saving, but with the enamel technology and the given ring design. Maybe in a different situation I would solder the wire.

@@sergejsblinovs3369 Interesting. So the glue is heat resistant? Or do you have to heat the glue to activate it before adding enamel?

@@DegreesOfThree so, after the wire is glued, I put the enamel on. Then I put the product in a muffle kiln. In a muffle kiln, the glue burns out without a trace.

@@sergejsblinovs3369 Ok, so the glue is just temporary and then the enamel holds the wires in place.

@@DegreesOfThree absolutely correct. The glue is only needed to keep the wire ornament in place when you apply the enamel.

You are right, there is not much technical information in this video for beginners.

about 2 minutes

You can contact me on Instagram - ENAMELI_jewelry. Thank you!

Thank you so much for pointing out this grammatical mistake. Corrected!

Thank you!