Clutch Master Cylinder Install Porsche 944

Подписаться 344

Просмотров 3,3 тыс.

50% 1

I show you how to remove the old, and install a new clutch master cylinder. This video is specific to a Porsche 944. Also, I mention it towards the end of the video, but to get my clutch pedal to feel firm, I did the final bleed with the pedal all the way to the floor. After closing the bleeder valve on the slave, I lifted the pedal by hand and it was perfect!

Опубликовано:

8 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 15

@ThomasC951 Год назад

Wonderful! Thank you very much. A lot easier than I expected.

@Clayscott87 Год назад

Great! I hope these videos are helpful!

@Porschee944 Год назад

Hello, thank You for video Greetings from Poland

@Clayscott87 Год назад

You’re welcome! And greetings back from Alabama US. Hoping these videos will be helpful

@bobd9868 4 месяца назад

That’s a flare wrench. A crowsfoot attaches to a 3/8” drive.

@Clayscott87 3 месяца назад

ah, sorry I misspoke... I'll do that a lot. :)

@P̈̇̃H 6 месяцев назад

Can I ask what issue you were facing before replacing the CMC? My 84 944's Clutch pedal works like it should but doesn't return more than 1/3 of the normal amount. I can pull it back out by hand or with my foot, but it no longer returns as it should. I want to be sure there isn't any other fix besides this drastic of a repair.

@Clayscott87 6 месяцев назад

I noticed fluid dripping from the master cylinder inside the floor board, and, my clutch pedal would go to the floor and not return at times.

@P̈̇̃H 6 месяцев назад

@@Clayscott87 ah thank you, I took mine to a 32 year retired Porsche mechanic to look over it so hopefully he can assess the best fix for me

@mycatexploaded 7 месяцев назад

My clutch randomly stopped working on my 944 while i was driving. The pedal still feels the same as it always has when i push it in. No loss of fluid in the reservoir. But it doesn't engage anything when i press it, i had to shift without the clutch to get it home. Any ideas if it's the slave or master or is it more Likely the clutch disc?

@LJC944 7 месяцев назад

Hi. I’m currently restoring a 1982 944 and the clutch goes straight to floor I’m replacing both master and slave at the same time then you know it’s all done and bled properly. Costs less than 200 well worth the job.

@LJC944 7 месяцев назад

It’s always better to do the cheaper option first is what I’m trying to say

@Clayscott87 7 месяцев назад

If your pedal is operating normally and you can confirm it’s moving the clutch fork, then you likely have a clutch failure of some kind. The disk, pressure plate, or throw out bearing… if pedal does not move the fork, then it’s a master/slave/pedal/line failure

@rodribra001 7 месяцев назад

@@LJC944did replacing the both the master and slave fix the issue? My 1983 944 currently has that same issue, clutch pedal springs straight down to the floor

@Clayscott87 6 месяцев назад

If your clutch pedal is operating like it should, but you can’t work the clutch… I’m afraid you’ve got bigger issues. You are likely looking at a new clutch kit.