Clutch Replacement Part 1: Parts & Tools | Honda S2000 

This channel will keep many S2000s on the road for years to come.

Thanks for sharing! super helpful! gonna watch all of your s2k videos

Thank you so much! Just finished my clutch replacement very helpfull.

This is awesome. I have been waiting for this mini series. My clutch on MY03 is starting to slip. Thanks for the hard work!

I installed a ebay clutch kit in my s2000 this past summer (it was $200 for everything) i installed it myself and i luckily didnt run into any trouble because like you i was prepared before my repair. I do agree with you use oem parts because the one in my car now has clutch buzz like crazy otherwise its okay and functional. I would only recommend it to anyone that cant afford anything better.

The s2k was my first clutch job and honesty it was super easy just very time consuming like you stated. The factory service manual was my friend

Great video can’t wait for the next video

Great video as always boss! I’m gonna get some longer extensions thanks to you! I will be doing the clutch in mine in the upcoming weeks

This video is amazing

One other thing to add. Spoon makes ridged collars that go in-between the subframe and frame rails. They keep the subframe perfectly straight in the car. Yes there is movement and will throw out you alignment. Have an alignment check done after.

Thanks for this awesome descriptive video !

Did this by my self... and I can tell you I wish I had taken it to the stealership... bu my pride got in the way lol

awesome info man!

Thank you very much for the video.

Finally! Nicely done, Jason!

As always 👌 most excellent!

Find forget about the slide for the throw out bearing. They usually worn pretty bad. Also there are a few parts for fork I would recommend replacing also.

Thanks for the set of videos! I know higher is always better when it comes to jacking the car up, but do you have any idea how high yours was with a respective reference point?

Excellent videos - thanks so much for putting this together. I need to decide whether to purchase a flywheel for my 2003 ap1 clutch job. Actually, I am assembling the oem parts to do the job in anticipation of the possibility that the parts may be discontinued down the road. I'm confident that my low mileage street driven ap1 will need a new clutch down the road sooner rather than later during my ownership. Is it fair to say that the old flywheel will most likely be serviceable where I am replacing a worn out oem clutch for the first time, (ie. no after market clutch parts have ever been used)? When the time comes for me the situation will be that the original oem parts are just worn out and sticky etc.- probably the real problem likely be that the slider for the clutch release bearing is dry and worn - that is what I expect will force me to pull the transmission off and when I do that I will put in a complete new clutch.

My clutch pedal feel very soft after my clutch replacement. Is it normal? I've tried bleeding the clutch system still feel soft. Then thought it could be the master clutch cylinder, changed and bleed again got all the air out but still feel the same. The clutch was perfectly fine on the day doing my clutch replacement. What could it possibly be? Thanks in advance

Literally have the car up and about to do this job.

I have a 2000 honda s2000 with only 52k on it. The clutch buzz is bothering me! Would I be able to get rid it of completely with these 5 honda oem parts? Thank you.

I have an important question, you said that at least a 36" extension is needed to get to the transmission bolts but the link you provided only goes up to a 30" extension?

Did you reuse the Flywheel and pressure plate bolts? If so any thread locker etc.

is "ACT 600355 XACT Streetlite Flywheel " any good for Honda S2000 AP1. I am going to install it. Or should I resurface the original Honda S2000 flywheel

what about replacing the rear main seal?

I thought it was the oem clutches that buzz....

Thanks for the video. Where did you order your parts?

do these oem flywheel parts fit my 05 s2000?