Hey CNC woodworkers!
This is my CNC spoilboard design. In this video I talk about the inspiration for my design, why I designed things the way I did, cost comparisons for other options, layout considerations, and then I go over the build process using my machine to make it! I have an Avid CNC, but the concepts are applicable to any wood CNC router. When I was building my spoilboard I had a lot of questions, and I hope this will help answer things, such as "how much spacing should you use for t-tracks?". Should you use T-tracks or T-nuts? A vacuum table or regular hold downs?
Download my CAD file and modify it to make your own ultimate CNC spoil board / waste board! My CAD file is done in Fusion 360, which is parametric and can easily be customized for any particular needs.
Download it for free here: www.corbinsworkshop.com/shop/...
The things I used:
* Cheap t-tracks: amzn.to/40DxRCp
* Affordable 20mm dogs: precisiondogs.us/products/pre...
* 3/8" downcut bit: amzn.to/3LOuLWq
* 1/4" downcut bit: amzn.to/48KHPWS
* Also try bits from 2L: www.2linc.com
More references:
* Avid CNC: www.avidcnc.com
* Avid CNC Spoilboard: www.avidcnc.com/support/instr...
***Update***: Jay Bates made a good point about gluing: once you wear through one layer you just glue on another top! So, you don't have to replace all three layers. Another good tip is to use a quality plywood for the bottom layer to get better grip with screws (compared to MDF). Thanks everyone for the comments and ideas!
Alternative products you can use that I mention in my video (but are expensive):
* Armor Tool Double Quick Track: armor-tool.com/product/48-dou...
* TSO Bench Dogs: tsoproducts.com/bench-dogs/
Check out my entire playlist for my CNC Build: • Avid CNC Build
References and inspiration for my design from Jay Bates:
* Jay Bates Spoilboard video: • Avid CNC Ep3: Vertical...
* Jay Bates CNC template file: jayscustomcreations.com/produ...
Thanks everyone!
Corbin Dunn
www.corbinstreehouse.com // Blog & Website
www.corbinsworkshop.com // CNC Files, Products, Woodworking Portfolio
CNC Build Episodes:
Ep 1: What CNC To Buy - • CNC Build Ep 1: What i...
Ep 2: Welded CNC Table - • CNC Build Ep 2: How to...
Ep 3: Making an Avid CNC Precise: • CNC Build Ep 3: How to...
Ep 4: How to Tram a CNC: • CNC Build Ep 4: How to...
Ep 5: Automatic Tool Changer: • CNC Build Ep 5: How to...
Ep 6: ATC Tool Rack Build - • CNC Build Ep 6: Automa...
Ep 7: ATC Setup in Mach 4 - • CNC Build Ep 7: Custom...
Ep 8: ATC Tool Heights - • CNC Build Ep 8: How to...
Ep 9: ATC Post Processor Setup - • CNC Build Ep 9: ATC Po...
Ep 10: 3D Printed Dust Boot - • CNC Build Ep 10: Print...
Ep 11: Improving the Avid CNC Table - • CNC Build Ep 11: Impro...
Ep 12: CNC Spoilboard - • CNC Build Ep 12: Make ...
Timestamps:
0:00 Intro
0:37 CNC Hold Down Methods
1:20 Spoilboard Design
5:24 Cost Comparison
6:22 Layout Considerations
8:31 The Build
16:55 Conclusion
#cncwoodworking #cnc #avidcnc #cncwoodworking
*** Some links are Amazon Affiliate links where I make a small commission at no cost to you if you make a purchase ***
21 июл 2024