Why You "WANT" To Cut Grids On Your CNC Router & How To Engrave Them On The Spoilboard or Wasteboard

Подписаться 71 тыс.

Просмотров 60 тыс.

50% 1

This video explains why you want grids on your CNC router spoil board (wasteboard), and how to design it.
Engraving a grid on your spoilboard, aka waste board, gives you exact positions to place your projects. Basically, it eliminates the guesswork altogether for where to set your XY zero positions.
Without a grid, you are adding at least 10 minutes to your setup time.
The other thing that makes it nice...grids look cool. This should be your very first CNC woodworking router project when you get your CNC router.
This video gives you guidelines for doing this. It can be done on any software and on any CNC router.
This project was done on a BobsCNC router and designed in Vectric Vcarve.
BobsCNC Evolution 4 G-code files is no longer available
__________________________________
VECTRIC SOFTWARE LINKS
[Please use these links when you order. It gives me credit. Thank you]
→ Vcarve Pro (Recommended): shrsl.com/36xfh
→ Vcarve Desktop (24x24” size limit): shrsl.com/36xfj
→ Vectric Aspire (3D modeling): shrsl.com/36xfk
→ Cut2D (for the budget-minded): shrsl.com/36xfm
__________________________________
CNC FOR BEGINNERS playlist: bit.ly/3rg4WTl
CNC ENTREPRENEURS playlist: bit.ly/3mxz6Ok
VCARVE FOR BEGINNERS playlist: bit.ly/3pdmFsi
BEST STARTER BIT SET FOR CNC ROUTERS
Beginners complete CNC router bit starter set (+ free vector files)
idcwoodcraft.com/products/the...
1” Surfacing bit required for surfacing your spoilboard
idcwoodcraft.com/products/ult...
OTHER ‘MUST HAVES’
→ Calipers: link.idcwoodcraft.com/smymui
→ Hearing protection (plugs don't work): amzn.to/2Hs1RgW
If you currently own a CNC router, please take a moment to take this survey to share your experience with it: bit.ly/3r5XzNh
Cool vector files for CNC router & CNC laser: etsy.me/3oxX79l
Learn how to start an online business from scratch: bit.ly/2ZUEIKK
Words are the top-selling items of all time with CNC products. Get the free WORDS THAT SELL list: idcwoodcraft.com/cnc-lp-1/
CNC For Beginners Podcast: anchor.fm/garrett-fromme
CNC Insiders sign up (free files and more): idcwoodcraft.com/cnc-lp2-free...
OTHER WAYS TO SUPPORT THIS CHANNEL
→ LIKE the video
→ COMMENT about the video
→ DONATE: www.paypal.me/garrettfromme
→ PURCHASE through links I provide in these descriptions. I receive affiliate commissions and the cost is the same to you.
Facebook: IDCWoodcraft
Website: www.idcwoodcraft.com
Email: support@idcwoodcraft.com
#cnc #cncrouters #cncforbeginners #vcarvetutorials #vectric

Опубликовано:

2 фев 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 166

@huntersgametime981 3 года назад

I never thought of doing a grid. I can see how that will make seeing up much easier. Thanks for explaining this so clearly.

@IDCWoodcraft 3 года назад

Hi Hunter! Yeah, it took me a bit to realize it was the smart way to go.

@Sbregher 3 года назад

Wow! This type of tool path is so much more efficient! Thanks for sharing the technique!

@IDCWoodcraft 3 года назад

You are welcome, my friend. It sure helped me. Wish I thought about it earlier.

@alpscraftshack599 3 года назад

What can I say. You make things simple & easy to understand. You're the man.

@IDCWoodcraft 3 года назад

lol, thanks Patrick. Making things simple and easy for others takes a lot of friggin work...

@philliptaylor742 2 года назад

You are the the man Garrett. Your explanations are so clear for us new to CNC. Thank you so much.

@IDCWoodcraft 2 года назад

Phillip, you're so welcome my friend! Happy to help!

@lylepollett2234 3 года назад

I can't believe I waited so long to put grids on mu spoil board. What a blessing it is. Thanks.

@IDCWoodcraft 3 года назад

Know you know, my friend!

@TripleLRusticDesigns 2 года назад

Your videos are so wonderful. I just got a Shapeoko XXL and your videos are really helping me learn the machine and Vectric Vcarve.

@IDCWoodcraft 2 года назад

Hi Triple. Congrats on getting the machine and getting started. I am excited to see another CNC'er get rolling!

@YHS51 3 года назад

Thumbs up Garrett👍👍👍. These are those details I was talking about. Thanks so much. I use grid lines when I draw my designs on paper for alignment purposes. So I can see how they will work on the waste board. 🕵🕵🕵

@IDCWoodcraft 3 года назад

Wish I did it sooner. I always knew I needed to do it. Know I know why it's so handy

@marthacameron9459 2 года назад

Thanks Garrett. You made this simple and straightforward. I've now set up a grid for my 25 x 25 Shark. Once I get the spoil board in place and leveled then the grid will be cut next..

@IDCWoodcraft 2 года назад

Martha, I am glad to see you are going at this methodically!

@geordie331 2 года назад

once again well thought out and explained i never about putting grids on my board but i might just do it now after watching this vid thanks again

@IDCWoodcraft 2 года назад

Geaorge...grids are awesome!

@jeffberg2010 2 года назад

Thanks, I just did my first project on a X-Carve Pro. I was thinking that having a grid would make alignment so much easier when setting up a job. I just saw this video and really enjoyed it. Thanks for the help. Nice job carefully and patiently explaining this.

@IDCWoodcraft 2 года назад

Hey Jeff. Grids save so much setup time, it isn't funny! You'll see. What kind of projects are you making?

@ScubaStevo83858 3 года назад

grat videos, im just finishing my cnc now and this is the perfect information for me!!

@IDCWoodcraft 3 года назад

Erik...hello! You will not regret putting a grid on your machine.

@wesmac68 3 года назад

Thanks! Just purchased the plan on Etsy. So there is my $1 toward your $100,000 goal. Thanks again

@IDCWoodcraft 3 года назад

Love the intention, my friend. That gave me a smile!

@eherby 3 года назад

Fantastic. Thank you for not over talking the steps

@IDCWoodcraft 3 года назад

Hi Ed. You are welcome. So many videos out there are full of blah blah blah.

@loydeberkholtz1943 2 года назад

Perfect, Improve ,improve ,improve my steps to create a better cncer.For me it is the little things one step at a time.I will always pass you on to my friends, Thanx Loyde

@IDCWoodcraft 2 года назад

Loyde, thanks my friend. And I'm glad I could help! Keep up the good work!

@JunkWorkshop Год назад

Hi. Smart work. Thank you for sharing. Greetings from Sicily!

@IDCWoodcraft Год назад

Junk Workshop, glad you liked this one brother!

@mikejones-km6fc 2 года назад

great job, thanks for your videos

@IDCWoodcraft 2 года назад

Thanks Mike

@rasdsaintbey3230 2 года назад

Very interesting moor overstanding thank you

@IDCWoodcraft 2 года назад

you're welcome Ras

@fredscott413 3 года назад

thanks for another show.

@IDCWoodcraft 3 года назад

Almost every day. I should sell tickets to them

@TheKirk48 2 года назад

Another amazing video!

@IDCWoodcraft 2 года назад

Steve, thanks again my friend!

@jackiewebb9580 2 года назад

who would ever down vote this guy?? man thanks you are awesome!!!

@IDCWoodcraft 2 года назад

Hi Jackie. It's funny, isn't it? I don't let it bother me. I have realized some people simply WANT to find things to disagree with (and they don't even realize it)

@joecook3847 Год назад

I am going to try it out

@IDCWoodcraft Год назад

Joe, let me know how it works out!

@MattMadeIt123 3 года назад

Outstanding Vcarve tutorial. My CNC will be delivered late April and I downloaded a Vcarve Pro trial today. Want to learn the software a bit before I get my machine. Also playing with Carbide Create, F-Engrave and Fusion 360. Hope I didn't jump the gun on getting the trial too early.

@IDCWoodcraft 3 года назад

You can never jumpt too early. You're starting to learn now. Can't wait to hear "It arrived!"

@joshuaadams2102 2 года назад

Great video!

@IDCWoodcraft 2 года назад

Thanks Joshua!

@joesaccomanno4791 2 года назад

Can across your videos by fluke! And I love them. Thank you

@IDCWoodcraft 2 года назад

Hey Joe. Welcome to the community. I am glad you like these videos. What makes them something you like.

@TomGlander Год назад

Good stuff. Thanks!

@IDCWoodcraft Год назад

Tom, you bet!

@donochetti2177 3 года назад

Fantastic I'm going to do this tomorrow! If I understand correctly for example where you placed the wood I would set the 0 point to an offset of x: 6" and y: 8" in vectric?

@IDCWoodcraft 3 года назад

Hi Don. Yes, you you nailed it!

@montauk6682 Год назад

Garrett: this is just what I was looking for as the "other" video that you referred to got too far into the weeds for a CNC newbie like me. I will be purchasing yours on Etsy shortly. One question: did you ever think of showing how to run an Air Cut tool path file so that us newbies can confirm that it will run properly before we make some unwanted cuts?

@IDCWoodcraft Год назад

Lewis, you bring up a great suggestion my friend about the air cut. I'll have to add it into my video to-do list! I'm glad this one got you going in the right direction my friend. Keep up the good work!

@daviddalton5851 3 года назад

Coming from a fabrication background I can see the value in your grid board. I will be purchasing this as soon as I am set up. I will be running mach 3 controller with V carve. That is my plan anyhow. I'm thinking this will work for me. Thank you sir very much for your videos.

@IDCWoodcraft 3 года назад

What's up, David. Yeah, makes perfect sense. you'd think I would have done this sooner. Vcarve...excellent. I've not worked w/ mach3. Let me know when you make the jump!!!

@daviddalton5851 3 года назад

@@IDCWoodcraft I will for sure. Your page is great and just what I needed. Currently I'm sitting in front of my QueenBee Pro 1500 x 1500. It's all still inside the box and I am devising a build plan. But your page is making me want this baby put together now. I have seen V carve works with mach 3 controller but we will soon find out. I will be purchasing some bits shortly and seen you offer those so I will be checking your store out tonight when I get home. I can't say thank you enough for your page. Super cool.

@IDCWoodcraft 3 года назад

@@daviddalton5851 the site revamped website is operational tomorrow. Get on the priority list in the video description

@IDCWoodcraft 3 года назад

@@daviddalton5851 Mach 3 is not tied to vcarve. It runs your machine. It's supposed to be an excellent program

@daviddalton5851 3 года назад

@@IDCWoodcraft copy that. Mach 3 is the controller. Very cool I will get on that link tonight and see what all your offering. Again this is exactly what i needed. Awesome 👌

@TheJCinator Год назад

Not familiar with vcarve but most other CAD/CAM software, have a rectangular pattern command which basically lets you enter your grid size and extents and creates that grid for you. Takes about 10 seconds.

@IDCWoodcraft Год назад

Twenty, Vcarve does have that but I wanted to show you a few other ways too!

@redherring5532 3 года назад

Really cool video again, been watching a lot of your content, very good concise information, really like this way. Mentioned in another video I purchased an x carve to start, a year later and I got a 1500x1500 queenbee, and my boss got one too, so I had the priveledge of building two. I work at a large format digital print shop and was able to use our flatbed printer to print a grid on the spoil board, 59 inches square is a little unorthodox to source at a big box, so I had him look around for 5x10 sheets and we got two. My point is that carving it into the board itself Is WAY more practical as you get a per machine reference which is gonna be properly proportionate to the machine. What kind of bit did you use? (I'm still in the middle of the video)

@IDCWoodcraft 3 года назад

I used a 30 degree. Nice thin lines. 60 will work too. Don't do 90. too wide

@daviddalton5851 3 года назад

Gold right here boys. I am planning on purchasing some bits from Garret. I am learning a lot just by following this page. I am assuming I can buy a kit but I'll be looking for these sizes. Very cool.

@paulrcreech7731 5 месяцев назад

I know it's an old tape but I just use it to use on my new onefinity wood worker. Thanks

@IDCWoodcraft 4 месяца назад

paulcreech7731, right on brother! That will work on your onefinity no problem. I am excited for you to cut it out.

@sfg18b Год назад

Just what I was thinking

@IDCWoodcraft Год назад

sfg18b, great minds think alike my friend!

@jeffreyreed3795 Год назад

New to CNC. The grid sounds like the best way to go. Thanks for the tutorial. Do you have to have the homing switches for the grid to be placed in the right spot? Or do I just drive the Longmill to the front left side and start.

@IDCWoodcraft Год назад

Jeffrey, to make your grid you will zero your machine on your spoilboard just like you would zero it onto a project. Depending upon how you set up your project in Vcarve, your zero might be in a different spot but I recommend zeroing it to the center of the spoilboard for the best results.

@slvrbullit56 Год назад

Per you recommendation I have purchased a Longmill 48x30 MK2, and I am using Vectric VCarve. I am trying to cut the grid in my spoilboard but VCarve tells me that I need to use tiling due to parameters. I am not having much luck finding that feature in VCarve

@IDCWoodcraft Год назад

slvrbullit56, congrats on getting your longmill brother! You shouldn't need to utilize tiling for your waste board my friend. This may be due to the version of Vetric you're using. I do have spoilboard file you can check out on Etsy that will definitely make your life a little easier, here's the link if you want to take a look→ etsy.me/3oxX79l. Otherwise I recommend joining Kate and I for our youtube live sessions we do every Wednesday at 8PM EST and we should be able to help you then brother!

@tylercrye292 3 года назад

I can see how helpful this would be on any cnc. i have a shapeoko pro xxl arriving in ...well soon i hope, and was wondering if you would recommend this on that platform as the spoilboard isnt a solid piece. Also , just received your bits in the mail amazingly fast and really appreciated the hand written note!!!

@IDCWoodcraft 3 года назад

Hello Tyler! You are welcome for the note. I always know there is a human being on the other side of everything I do. I recommend a grid for any CNC. It helps more than you'll ever know. Basically, it eliminates 'finding' X and Y zero points.

@larryeuteneier4103 Год назад

Does this work with any CNC machine

@soaringeaglesadventures9028 4 месяца назад

Garret, appreciate the video. I have an Axiom pro. I follow your instructions and when go to carve the 2x4 grid it says I’m outside the Y+ soft limits. I’ve dealt with this before and it’s usually easy to find reason. Not so this time. Running vcarve pro. Any thoughts?

@IDCWoodcraft 4 месяца назад

soaringeaglesadventures9028, Unfortunately, I am not much help here. I am not a tech guy when it comes to CNC machines. I may be good with the programing and operation but when it comes to troubleshooting, I'm an absolute deer in the headlights. I recommend reaching out to your machine manufacturer regarding your issue. They will be able to help you the best my friend!

@ronnorris1504 2 года назад

Again, very informative video. Thank you. Do you have a layout grid on Etsy for a 48x32?

@IDCWoodcraft 2 года назад

Ron, no I don't sorry brother!

@b-radg916 2 года назад

When securing your stock for carving with the grid, do you prefer double sided tape, hold down clamps, or something else? I’m currently using cam clamps, but have had them slip once, which ruined a small project. Also, which would you use … a 60 degree v-bit or a 1/32” end mill? Thanks, and thanks for all your great content!

@IDCWoodcraft 2 года назад

b-radg916, I haven't had a good time w/ cam clamps. I recommend hold down clamps or double sided tape, it's really just whatever you prefer on that one! And I would use a 60 degree vbit.

@tonywinter8069 Год назад

love your work, I seem to have a problem with my mouse pointers?? My cursors don't change to show the range of tools being used. eg. when I select and try to use the polyline I don't get the cursor change that you do, it appears with all tools as cross hairs with coordinates, not the corresponding cursor graphic of the polyline. Can you help please?

@IDCWoodcraft Год назад

Hi Tony. This is a technical issue that you need to contact vectric about

@BigAlz11 Год назад

How do you get around the Z- limit switch do do this on a dyi CNC? Only way I can think is to remove the bit, loosen the spendle to lower it, home it out, raise up in Z, add bit back to spendle, then Zero to surface....? Then replace spendle to previous potion when done to avoid crash in future. Will that work?

@IDCWoodcraft Год назад

Allen, that is a bit tricky on your CNC. You should set up your Z axis to where you can extend the Z axis into the spoilboard at least half an inch. In your case, removing the z limit switch for the time being might be a good idea.

@lojack223 Год назад

Can you use the X,Y at the home position and then Z of the bottom of probe (Onefinity Machine)?

@IDCWoodcraft Год назад

Lojack, you can but I would still recommend a different position to set your zero.

@RonMarshallrone 3 года назад

Nice video! What do you think of the Onefinity machines? It's a newer one but the setup is a breeze from what it looks like and the steel bars look pretty sturdy.

@IDCWoodcraft 3 года назад

Hey Rone. Price is good and, yes, everything I've heard is good. It is one of my top picks

@RonMarshallrone 3 года назад

@@IDCWoodcraft Sweet! I don't care for their customer service so far but the product looks pretty good for an entry level machine. Thanks bud!

@IDCWoodcraft 3 года назад

@@RonMarshallrone my pleasure. Always there to give my humble, yet experienced, advice.

@tomcollick8111 Год назад

Garrett, any idea why a spoilboard flattening Phantom CNC toolpath would state Y- is out of soft limit, X- is out of soft limits?

@IDCWoodcraft Год назад

Tom, reach out to the gents that made the spoilboard flattening file brother. I think your issue lies in not having the right zero location to start the cut! This makes the machine think you are going to crash into itself.

@akayii 2 года назад

Great video Garrett but every time I go to create my toolpath for my grid I get this error "One open vectors were identified in the selection and are being ignored. There are 0 remaining vectors." I don't know how to fix this. Thanks for any help. I have a cut area of 48in X and 32" Y.

@IDCWoodcraft 2 года назад

Hi AK. You need to run Ve tor validator. Watch this video about it → ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-s5XvV0F7VcQ.html

@michaelmartin2565 Год назад

This happened because you didn’t separate the vertical poly line from the horizontal when drawing.

@beardedlocoswoodworks 2 года назад

Hello great video, do you have this grid for the 30x30 longmill g file that I can purchase thanks

@IDCWoodcraft 2 года назад

Bearded Locos Woodworks, thanks! Yes, I have a file for creating the spoilboard on the 30 x 30 longmill. Here's the link → www.etsy.com/listing/1080756899/longmill-spoilboard-file-make-your-own

@johnolz1886 Год назад

Hey Garrett, new to this so please excuse my naïveté but when making this grid you keep mentioning “entering your X or Y distance” off screen but when I attempt to do this it follows my command but in the opposite direction towards my workable space. Not offset like you suggest at first and then move. Any thoughts?

@IDCWoodcraft Год назад

John, that's a strange one brother. It's a little tricky to troubleshoot over comments. I recommend joining Kate and I for our live sessions on Wednesday nights at 8PM EST and we should be able to help walk you through it a little better and give you some tips!

@dcaudio1 6 месяцев назад

Garrett when you building the grid are you holding down the mouse button and entering 2" and 24" until your done?

@IDCWoodcraft 6 месяцев назад

dcaudio, this one is a bit too tricky to answer over comments brother! Join Kate and I during our weekly live session on RU-vid Wednesday nights at 8PM EST! We would be happy to help you then.

@user-mz3gk9eg4h 10 месяцев назад

Hi Garrett. I purchased your BobsCNC Evolution 4 & E4 Grid Engraving G-code Program With Instructions yesterday. How long does it take before I receive the downloads? Thank you

@IDCWoodcraft 10 месяцев назад

user-mz3gk9eg4h, you should be able to download them from your purchase history in Etsy brother! If you are having any trouble with the Etsy interface, reach out to Etsy! They will be able to help you immediately.

@DaveGeddes 3 года назад

Do you think using the grid lines as reference is accurate enough? I would think some sort of edge reference that you push the board up against would be better than eyeballing it against a line.

@IDCWoodcraft 3 года назад

Hi Dave. A stop board is great. Grid references are useful for anything. It's up to the user. Personally, I use both.

@DaveGeddes 3 года назад

@@IDCWoodcraft cool thanks! I'm new to CNC but am learning a lot from you. Thanks for being so helpful!

@IDCWoodcraft 3 года назад

@@DaveGeddes you got it!

@chuckfreed282 Год назад

great tutorial however i dont understand where you are typing 24 and 2 to get the lines all the same

@IDCWoodcraft Год назад

Chuck, 24 is the total distance and 2 is the distance between each of the lines. This way we get 12 equal distant lines.

@hmatyas1 3 года назад

I did not originally have a grid on my machine. However, after overcutting a board I did use it as a reference. I did not realize that if you cross a line, the line disappears. I will have to do this and see what happens. Thank you.

@IDCWoodcraft 3 года назад

The line is still technically there in the design. It's just the overlap that makes it disappeaear

@steventherealtor3718 Год назад

I copied everything exact to fit my Onefinity Journeyman but when I go to calculate it says there is 1 open vector and is being ignored so there are 0 remaining vectors and won’t calculate. Any ideas? On Vcarve Pro 11.0. Confirmed only the one green square on bottom left in node mode.

@IDCWoodcraft Год назад

Hi Steven, have you looked to see where the open vector is on your design software overview? It should highlight the area where it detects an open vector and allow you to fix it by trimming it or removing it.

@steventherealtor3718 Год назад

@@IDCWoodcraft Thanks. That video did the trick in the first 4 minutes. It was the “on” I needed.

@cyber0005 9 месяцев назад

Great

@IDCWoodcraft 9 месяцев назад

cyber0005, thanks brother!

@brandonoxendine8854 3 года назад

For some reason when I calculate I'm getting an error message because of the overlapping vectors. How can I correct this?

@IDCWoodcraft 3 года назад

Hi Brandon. I'm not sure why that is happening. Are you using Vectric?

@brandonoxendine8854 3 года назад

@@IDCWoodcraft yes Sir

@shayhildebrand337 Год назад

Not sure where I went wrong. Vcarve tells me 1 open vector and being ignored, 0 remaining vectors. Vector validator comes up with a tonne ofr Overlaps/Intersections. Join Vectors comes up with 1 closed vector and 0 open.

@IDCWoodcraft Год назад

Shay, try to reduce the problem down to smaller parts of your project and look for spots where there might be overlaps. They should be highlighted on your screen when you do vector validator.

@tomcollick8111 Год назад

Do you have a phantom version?

@IDCWoodcraft Год назад

Tom, not yet brother but it is in the works!

@nikopeters9660 Год назад

What are the feeds and speeds?

@IDCWoodcraft Год назад

Niko, you can find all the recommended feeds and speeds for each bit here brother→ bit.ly/3xiLebv. It will be a great guide to have on hand for any project/bit you're using!

@sfg18b Год назад

I’ve tried at least 10 times. And when I get to the nodes. I’ll only get half of them. Either horizontal or vertical lines. What am I doing wrong. I looks so simple. Any takers will be appreciated

@IDCWoodcraft Год назад

sfg18b, I recommend taking a look at this one here brother: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-RYP5TA4k70I.html. I think you'll find it super helpful!

@larryhansen7852 Год назад

Garrett, I know that I am dumb, but I can't find your ETSY store

@IDCWoodcraft Год назад

Larry, heres the link my friend: www.etsy.com/shop/IDCWoodcraft

@MrRiver254 2 года назад

how do you get your bits sharpened

@IDCWoodcraft 2 года назад

Rodney, its typically best to buy new bits unless you get into sizes of 1/2" or above

@edmelzark1069 6 месяцев назад

Will this file work on my Genmitsu 4040 Pro machine

@IDCWoodcraft 6 месяцев назад

Ed, you can absolutely create your own gridelines. But, I'm sorry the file I have on Etsy is designed for the longmill specifically my friend!

@edmelzark1069 6 месяцев назад

@@IDCWoodcraft okay thank you

@WhittlerKevBushcraft 3 года назад

Funny enough I made one similar a few days ago for the same reason

@IDCWoodcraft 3 года назад

Grids are so handy!

@Dta1996 3 года назад

Why use profile instead of Vcarve?

@IDCWoodcraft 3 года назад

Vcarve is for letters...things with closed boundaries on both sides that need to be cut to. This is ctting lines 9vectors0. Basically, vcarve is much more work and not needed for this type of job.

@EvangelistJoeArnold 3 года назад

Is that v carve pro or just v carve?

@IDCWoodcraft 3 года назад

Hi A3! I am using desktop version. works the same except for size limts and a few other features.

@Hateweek1984 5 месяцев назад

Tried this but keep getting "an open vector " error

@IDCWoodcraft 5 месяцев назад

Hateweek1984, This one is a little tricky to walk you through over comments my friend. I recommend joining Kate and I for our live sessions we host every Wednesday evening at 8PM EST. We should be able to help walk you through it then brother!

@TheJonboix 2 года назад

Are the screws in the spoilboard just to hold it down?

@IDCWoodcraft 2 года назад

Hi John. Yes they are.

@TheJonboix 2 года назад

@@IDCWoodcraft The reason I ask is I see and hear a lot about people installing T-nuts on their spoil board. And laying things out in tracks. I ordered a track kit from Sienci and have been wondering how that works with a spoil board.

@IDCWoodcraft 2 года назад

@@TheJonboix tracks are great. It takes a little more time to set up but they're easy to work with once they are

@TheJonboix 2 года назад

@@IDCWoodcraft Then, instead of a solid board do I lay it down in strips?

@IDCWoodcraft 2 года назад

@@TheJonboix there are screws to hold down and most of the holes have threaded rivets for clamping

@lochinvarroome 7 месяцев назад

maybe not worth the time, but a nerdy thing to do would be to carve the x,y coordinate label near each intersection

@IDCWoodcraft 7 месяцев назад

Lochinvaroome, that is a great idea brother!

@lorimurphy9043 2 года назад

Hey Garrett....I clicked the link for the gcode file in your etsy store, but it's not there.

@IDCWoodcraft 2 года назад

Hi Lori. Yes, I removed it. It's a dollar product. If you email me, I will send you the file. garrett@idcwoodcraft.com

@gregoryburnssr.8503 2 года назад

Thanks for the information! I just ordered a SD110 and this will be my first project. Along with the CNC I am waiting for your router bits as well that I ordered form your Etsy account. Cheers GB

@IDCWoodcraft 2 года назад

Hi Greg. Exciting...you ordered your machine! Your router bits are on their way!!!!!