CNC Pen Plotter From Old CD Drives - A Step By Step Guide

Подписаться 543

Просмотров 10 тыс.

50% 1

A video on how to make a CNC Pen Plotter. Links used in the video:
LaserGRBL - lasergrbl.com/
Inkscape - inkscape.org/
Inkscape extension - secureservercdn.net/198.71.23...
grbl - github.com/grbl/grbl
Spindle control files - github.com/bdring/Grbl_Pen_Servo
Socials:
TikTok - vm.tiktok.com/ZMeHKRgAs
Discord Server - / discord

Опубликовано:

4 июн 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 23

@jeasunsharif5885 3 года назад

Bro, why you so smart. Very cool little vid.

@molasseshands 2 года назад

way cool man, big thanks

@manurk8112 3 месяца назад

Thank you ❤

@bigsscore8378 2 года назад

Bro did you know that by adjusting the pods on the driver board you can limit the current to your motor's and then you can run the cooler that's why the pods are on the driver pcb. Any way excellent video. Good job. Thanks

@temu_rb7147 2 года назад

Nice job thank you so much

@FactsFromFiction 2 года назад

Glad you liked it! :)

@murraymadness4674 4 месяца назад

This is very clever use of junk. However, I'd expect you will find a lot more jet or laser printers for free that have much faster more robust components. I'm thinking you have another video doing that I just have not seen it yet.... lol

@asrimuhammad3946 2 года назад

sir inskcape what series to wear. can't we make dgcode using lasergbrl

@FactsFromFiction 2 года назад

You can make gcode with many programs, the issue is that programs such as lasergrbl don't have built-in servo control, whereas the inkscape extension does. If you are willing to do a bit of extra work you can make your gcode with whatever.

@UzunKamis Год назад

Dear FFF, the link for *MI-Inkscape-Extension.zip* seems to be broken. Do you mind fixing it? 02:40 Can you give information on setting the VRef value for the DRV8825? 06:02 Are you sure that *Red* is _Ground_ and *Brown* is _5V?_ I think *Red* is _5V_ and *Brown* is _Ground._

@srg_5941 2 года назад

bro I have cd driver but the motor have 2 wire it dos work and what is the code

@FactsFromFiction 2 года назад

That's odd - are you sure there aren't 4 connectors? Stepper motors have 4 connectors, all needed to produce the variable motion so you can move the base and plot.

@srg_5941 2 года назад

@@FactsFromFiction I buy a dvd yesterday and take the steper motor. the dc moter was on dvd reader the steper was on W/R

@FactsFromFiction 2 года назад

@@srg_5941 Well in order for this project to work you need stepper motors. They don't have to be from old CD drives, but the old drives have good, straight rails to build the axes onto

@srg_5941 2 года назад

@@FactsFromFiction I make one but it dose not move full steps

@FactsFromFiction 2 года назад

@@srg_5941 Might be a software problem if you can get it to move but not all the way