Sam wonderful video. Its amazing you know how to do wiring like that and what things you need to build a table like that. I have tried to get into some stuff like that with little learners kits and I have never been able to understand it. Good job.
So is this the kind of electrical work you do professionally? Very neat! At my regular job I work in a Dutch designed greenhouse and we have an electrician that works there from holland, he builds these electrical control boxes for all the automation through the facility. It’s pretty fascinating.
Hi Derek, yes it's some of that, what I'm doing professional. But It's the first time that I build a CNC control cabinet, so I hope that it will work when I have finished the mecanical parts. I think the dutch are famous for their greenhouses. Much of our vegetable in Germany comes from them.
Sam's Workshop Diary yes, I have heard people say they are “the Lamborghini of green houses” very cool places to be in. Good luck. I’m excited to see how it turns out.
Hi, I am planning to build a plasma cutter CNC and your work is really impressive. I would and I am sure others would appreciate if you can post a list of the components you used. Thanks
Super gemacht, ich hoffe Du erklärst auch noch etwas mehr zu den verwendeten Steuerungskomponenten. Ich möchte mir auch irgendwann mal einen CNC-Fräse bauen, das größte Problem ist für mich die Steuerung.👍👍👍👍
Hallo JoJo, ich denke wenn das Teil am Ende läuft (ich hoffe das es jemals läuft 😓), werd ich mir die Zeit nehmen und nochmal alles etwas ausführlicher erklären. Auf Englisch fällt es mir halt doch deutlich schwerer und dauert länger, aber ich möchte dabei bleiben, damit ich endlich etwas mehr Ansporn habe es besser zu lernen. Wenn es bei dir mal soweit ist und du eine Fräse bauen willst, kannst du gerne auf mich zukommen, dann hab ich mit meiner vielleicht schon etwas Erfahrung sammeln können und kann dir bei deinem Bau behilflich sein.
Hello electrical engineer, großes Kompliment, ich bin sehr erstaunt - kann aber leider hier nicht mitreden, weil ich keine Ahnung habe - aber davon viel! 😃 Sam, ich denke du wirst alles richtig gemacht haben, ich traue dir das auf jeden Fall zu! 🙂👍
Danke Micha, ob ich alles richtig gemacht habe sehn wir dann erst am Ende 🤣, hab noch keinen Test gemacht ob ich mit der Steuerung auch einen Motor zum laufen bekomme.
It is this card www.rc-letmathe.de/CNC-Steuerungen-und-Interfaces/MDLCNC-Estlcam-Interfaceboard-fuer-Einzelendstufen?source=2&refertype=1&referid=173
Thank You for your comment. Please have a look at my new video. There are a few links in the description. If you have more questions feel free to contact me again. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-njyXmwJjnVI.html
I'm using two compressor with approx. 150l/min. That's enough for 70A. So I think you should use a compressor with more than 200l/min. Normally in the manual of the plasma cutter is an information how much air you need, if you have something like that please have a look. If you can make breaks between the cuts a smaller compressor is also ok, thats how I worked in the beginning.
Thank You! the lpt port is only the connection to the cnc board, where are the terminals for the drivers. If you contact me on instagram or E-Mail (adress channel site) I can send you some documents.
@@samsworkshopdiary5748 Hi sir, great work. Would like to build my own. Kindly send me documents on how to build the schematics and requirements please. My email andy.warui@gmail.com
Hi, sorry but I don't have a wiring diagram. But here is a link where you can find some information about the electronic assembly: www.estlcam.de/schaltschrank_klein.php If you contact me on instagram I can give you more informations.