Тёмный

Coastal Offroad Rear Bumper Build | 1st Gen Sequoia | Part 1 

Treehouse Offroad
Подписаться 6 тыс.
Просмотров 11 тыс.
50% 1

Treehouse Offroad discount codes:
Coastal Offroad makes the best high clearance bumper kits out there!
- Use code "treehouse5" for 5% off anything at www.coastaloffroad.com
Skid Row Offroad makes the toughest skid plates for your 4x4!
- Use code "treehouse10" for 10% of anything at www.skidrowoffroad.com
Bumper build part 2 • Coastal Offroad Dual S...
In this video I build the High Clearance Rear Bumper by Coastal Offroad for the 1st Generation Toyota Sequoia. I mainly focus on the passenger side, but both sides are identical. This is not an instructional video on how to weld, as I am still an amateur. I use a Lincoln flux-core process, but shortened and/or sped up all the welding sequences, and did not show the slag removal. I also show very little prep work, beveling, or grinding, but much of it was involved. I did not film the removal of the bumper cover, as this is easily searchable on RU-vid.
I paid full price for everything in this video. I have had a great experience with this company and feel confident recommending them. The customer service and especially the communication has been outstanding.
Great video on removing the Rear Bumper Cover (Great channel in general)
• Removing bumper cover ...
Bumper Assembly Manual. It was helpful for me to have this in advance.
drive.google.c...
Coastal Offroad High-Clearance Rear Bumper Kit
www.coastaloff...
LINCOLN ELECTRIC Easy MIG 180 Wire Feed Welder
amzn.to/3B4jPeZ
YESWELDER Flux Core Mig Wire
amzn.to/2XEU3Ax
6 Pcs Arrow Welding Magnet Set
amzn.to/3np4eSE
Astro Pneumatic Double Cut Carbide Rotary Burr Set
amzn.to/3GfqJ4V
Awesome little grinder
amzn.to/3B4jzg1
IG - treehouse_offroad
-----------------------------------------------------------------------------------------------------------
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for the support!
GIH8H6RPXYDQQRIG
0KQGFHPVMPMTFPRP
G1B30YH2OMLJE86F
M3N023USWYKPXW9S
17HX2WFXSMBEHMAM
EPMN0PLJTOIE3TQR
JDUKP26GDAJ3CXRO
LDKFNXWE6TNXYBRR
VZXAYLDG8DNZRWTV
BRZQJNGOWMEETP5F

Опубликовано:

 

9 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 55   
@scottharmon5334
@scottharmon5334 2 года назад
You can use coat hangers as fill rods for welding those gaps. Lay the rod across the opening and tack it on one end. Then weld right along it, the gap will fill in nicely.
@treehouseoffroad
@treehouseoffroad 2 года назад
Wouldn't the plastic smoke and melt and make a mess though?
@jamiethomas8975
@jamiethomas8975 Год назад
@@treehouseoffroad Is there plastic around the metal coat hangers? I think he meant the metal coat hangers not plastic ones. Either way I like the tip!
@treehouseoffroad
@treehouseoffroad Год назад
@@jamiethomas8975 Ohhhhh, the metal ones...🤦‍♂ lol
@spencergreenaway1371
@spencergreenaway1371 2 года назад
Can't wait for the swing out video
@treehouseoffroad
@treehouseoffroad 2 года назад
Just finished building it! Off to powder coating soon. So much editing to do... Thanks for the support man!
@PawnshopmikeATL
@PawnshopmikeATL Год назад
I just recently/ randomly picked up an 01 4wd sequoia & you sir got yerself a subscriber!!! Dude I wish I coulda been at you house with a MagicMarket / cardboard & made a copy of this kit !! L😀L
@treehouseoffroad
@treehouseoffroad Год назад
Yeah they are great kits! Very well thought out and they go together really easily!
@MidlifeAdventurer
@MidlifeAdventurer Год назад
Thanks for the tip on cutting those pieces to fill those gaps. Mine was exactly the same way so I was ready to take care of it after watching your video.
@treehouseoffroad
@treehouseoffroad Год назад
Glad to help, did you have to smash the bottom body corners in like me or no?
@MidlifeAdventurer
@MidlifeAdventurer Год назад
@@treehouseoffroad yes sir.
@treehouseoffroad
@treehouseoffroad Год назад
@@MidlifeAdventurer weird, I forget who it was but somebody told me they did not have to cut the corners
@Learning5515
@Learning5515 Год назад
Nice. Thank you!!
@treehouseoffroad
@treehouseoffroad Год назад
You got it man!
@mrahd
@mrahd Год назад
Thank you for the great video, especially sharing your F*&# ups. We're all learning together, much appreciated.
@treehouseoffroad
@treehouseoffroad Год назад
You're welcome! I appreciate seeing the f*&# ups on other peoples videos too
@DonaldReynoldsII
@DonaldReynoldsII 2 года назад
U rocked it ..I did front bumper need to do back with swingouts this month
@treehouseoffroad
@treehouseoffroad 2 года назад
Hell yeah man kill it!
@TheFraziers
@TheFraziers 2 года назад
been waiting for this video! awesome work!
@treehouseoffroad
@treehouseoffroad 2 года назад
Thanks so much! I'm humbled I've been watching your channel for a year and a half!
@TheFraziers
@TheFraziers 2 года назад
@@treehouseoffroad thanks for being a loyal follower. I envious of where you’ve got your sequoia. I haven’t decided yet if we’re going to do bumpers for ourselves. Good to know you’ve got some good content on doing the job. Might come in handy later.
@sa1ntr0se
@sa1ntr0se 11 месяцев назад
I tried looking for your front bumper build. I got a front bumper coming and I was hoping you had one.
@treehouseoffroad
@treehouseoffroad 11 месяцев назад
I was not recording back then but if you find a 4runner video I'm sure they're very similar
@theclan4adventures
@theclan4adventures 2 года назад
Turned out great.. nice work.
@treehouseoffroad
@treehouseoffroad 2 года назад
Appreciate it man thank you
@isaacspoon
@isaacspoon 2 года назад
Great video! Love the intro
@treehouseoffroad
@treehouseoffroad 2 года назад
Thanks brother!
@Fit4FreedomLLC
@Fit4FreedomLLC 2 года назад
Looking at 1 of these for my 1st gen tundra. I wasn't sure what type.of weilder to use. I'm a novice but have a couple of welders my dad gave me. I would have removed the bumper after taking everything to do the full welds, would have saved burning your paint!
@treehouseoffroad
@treehouseoffroad 2 года назад
I removed the front one for welding and it ended up distorting pretty bad. It was a PITA trying to install it. I thought this time I'd try something new, but I should've used a welding blanket. Live and learn!
@81recinos
@81recinos 2 года назад
Love it brother 🤙
@treehouseoffroad
@treehouseoffroad 2 года назад
Thanks brother!
@Erenaquino
@Erenaquino 2 года назад
Looking Good
@treehouseoffroad
@treehouseoffroad 2 года назад
Hey thanks man, part 2 is almost ready
@hectoralvarez3072
@hectoralvarez3072 2 года назад
muy bien ese trabajo tengo que hacer lo mismo con la mia
@treehouseoffroad
@treehouseoffroad 2 года назад
Gracias Amigo
@jdunsmore_
@jdunsmore_ 2 года назад
Very nice!
@treehouseoffroad
@treehouseoffroad 2 года назад
Thanks for watching man!
@ryanhensley146
@ryanhensley146 10 месяцев назад
Hey Finn did you use a flux core welder on this bumper build and your tire swingout?
@treehouseoffroad
@treehouseoffroad 10 месяцев назад
Yessir
@ryanhensley146
@ryanhensley146 10 месяцев назад
@@treehouseoffroad Good to know. I’m getting ready to weld together a tire swing out kit for my Sequoia. Did you ever weld those Rocky Road rockslides to your frame?
@kevinmoua3792
@kevinmoua3792 2 года назад
the front and rear bumper come in pieces? it doesn't come on complete ready to bolt?
@treehouseoffroad
@treehouseoffroad 2 года назад
Correct, they come unassembled
@kevinmoua3792
@kevinmoua3792 2 года назад
Is the bumper built in for a tow hitch?
@treehouseoffroad
@treehouseoffroad 2 года назад
It does have a hitch receiver yes
@adammarks2326
@adammarks2326 2 года назад
Hey phin, nice channel. You'll have to show me how. Headed to harbor freight again today. Call you later.
@treehouseoffroad
@treehouseoffroad 2 года назад
Thanks Adam, Harbor Freight is my second home!
@christianwolf68
@christianwolf68 2 года назад
it is truly sad this the only offering out there for a rear bumper
@treehouseoffroad
@treehouseoffroad 2 года назад
Yeah it's a bummer there's not more aftermarket support for these trucks, but I predict that will change in the near future. Brute Force Fab also makes one fyi. Thanks for watching.
@christianwolf68
@christianwolf68 2 года назад
@@treehouseoffroad they have a good front end model but id love to see more offerings for the rear
@treehouseoffroad
@treehouseoffroad 2 года назад
@@christianwolf68BFF makes a rear but you have to call to order it. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-IBhZTZBD-zA.html
@christianwolf68
@christianwolf68 2 года назад
@@treehouseoffroad ty due to the hurricanes here in louisiana every year ive been setting up a 05 sequoia to deal with all the down trees and possible storm surge flood
@kj4362
@kj4362 2 года назад
Do you happen to still have your stock bumper
@treehouseoffroad
@treehouseoffroad 2 года назад
Nope sold it
@beardedwonder6621
@beardedwonder6621 2 года назад
Sucks you had to cut original parts of the bumper, I feel it's lazy on the engineering by literally cutting corners.
@treehouseoffroad
@treehouseoffroad 2 года назад
Probably to get the best departure angle possible, hence the "high-clearance" part. I could see this being a deal breaker for some folks but I'm all in at this point so I'm cool with it. Thanks for watching
Далее
Самое неинтересное видео
00:32
Просмотров 1,4 млн
BODY LIFT Install // 1st Gen Toyota Sequoia
14:58
Просмотров 8 тыс.
Lifted Sequoia on 35's // In Depth Walk Around
29:27
Просмотров 64 тыс.
Rubicon Trail gets the best of us
26:08
Просмотров 18 тыс.
Coastal Offroad KICKOUT ROCK SLIDER WELD-TOGETHER KIT
30:46
Welding a Coastal Off Road High-Clearance Front Bumper
11:18