Coil Spring Replacement 1980-1996 Ford Bronco F150 | Restore Ride Quality | Bronco Restoration

Подписаться 17 тыс.

Просмотров 26 тыс.

0% 0

Hello,
This video shows how to replace worn, sagging or broken coil springs on your car or truck. The truck shown in this video is a 1990 Ford Bronco 5.8, this process will be very similar to all 1980 to 1996 Ford trucks and vans.
Links:
Moog Springs CC818 (5.0 Engine) amzn.to/3SQOKVW
Moog Springs CC820 (5.8 Engine) amzn.to/3rE9PXE
Moog Springs CC822 (1-2" Lift) amzn.to/3MhDejS
Moog Springs CC824 (2" Lift) amzn.to/3fXy1BW
Ford Spring Insulators: amzn.to/3yqHwQj
Energy Suspension Insulators
(Black) ebay.us/wFxDUV
Bilstein Shocks: amzn.to/3D6vgY7
Bilstein Shocks (Quad): amzn.to/3D55H9B
Tool Kit: amzn.to/3Ep1Hlz
---------------
Truck Specs:
1990 Ford Bronco
Eddie Bauer Trim package
Black with Tan exterior
Saddle color interior
5.8L 351 Windsor engine
E4OD 4 Speed overdrive Transmission
Manual on the Fly 4x4
3.55 Dana 44 Front Axle w/Manual hubs
3.55 Ford 8.8 Read end
15" Alcoa Aluminum wheels
31" BFG All terrain tires
--------------
Bronco Videos Playlist:
ru-vid.com/group/PLc...
Please remember to like and subscribe.
Thank you.
***Disclaimer: This video is not sponsored. I use affiliate links. As a customer, you do not pay any more or less because of an affiliated link. A small percentage of the sale will go to the person who generated the link. Thank you for supporting my channel and helping me grow.

Опубликовано:

7 окт 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 91

@RoseBaby Год назад

This is such a precious truck. Thank you for sharing your knowledge with us.

@TheFixTech Год назад

My pleasure

@ToyManFlyer1100 3 месяца назад

Love,love,love the fact that you didn't use any fancy, schmancy Air or Electric Impact tools...Just plain old garden variety Hand tools...Ev'ry body ain't rich and can go out and buy $2000.00 worth of tools just to do this one job....😊😊👍👍👍!!!...

@TheFixTech 2 месяца назад

Yes! Thank you!

@syndicatestunts Месяц назад

Awesome video, thanks for the part numbers too! Starting to build my 81 Chromatic Freewheeling Bronco, will definitely buy the 1-2 inch lift springs!

@bluesdriver1142 17 дней назад

Best topic video so far. Very simplistic and thorough. Thanks for the link as well.

@SL1CK1307 Год назад

Very smooth straight forward video with bonus pieces of info. Thanx for that.

@halo_shepard7844 9 месяцев назад

You were recommended to see. My wife and i share the same vehicles in your video. Very helpful. Got a 89 Ford F150 XLT Lariat 5.0 4wd and she has a 1990 Ford Bronco Custom 5.0 4wd. Your videos will certainly help me restore her truck

@TheFixTech 9 месяцев назад

These trucks are great to work on.

@andres99house Год назад

You do deserve a AWARD🎉

@iHeartOiSkanks Год назад

The video I’ve been eating for.

@tedmaj143 3 месяца назад

Great video , thanks ,we are restoring a 1992 bronco

@shano92107 Год назад

Wish i had seen this b4 changing my coils a few years ago. I didnt take the sway bar off and it was a bear getting old springs out and new ones in (using spring compressors); your method is way nicer. THe new coils (not Moogs) bulged forward and contacted the forward shocks so i had to remove them which gives the truck a very ‘wallowing’ feel on the road. Those progressive Moogs sound WAAY better to soften up the ride. Thanks for a great step-by-step. Couldn’t ask for better 👍

@petermallow Год назад

Hi, I drive a 1987 F150 5litre efi. owned since 1990. It is right hand drive assembled at Ford Brisbane plant in Australia. The plant closed in 1998. I find your videos extremely helpful. Keep up the great work. Cheers from Queensland Australia. Forgot to mention it's a four speed manual or should I say three speed with granny gear.

@TheFixTech Год назад

That is a very unique truck you have.

@kmr01007 Год назад

Ahhh the pleasures of having a rust free truck..

@BuiltByBurt Год назад

great informational video !

@pm1035 Год назад

Great video thanks! You do a good job explaining with a nice video production value. Gotta do my 78 Bronco and think this is very similar....Thanks again

@1DjScarface Год назад

Jeff’s bronco graveyard or directly from energy suspension for the isolators… I got mine from there

@TheFixTech Год назад

I was able to get some directly from Ford, apparently they are the same as the 2010 Super Duty…

@layzorbeeemz7317 Год назад

I'm just finishing up overhauling my entire front ttb axle on my F-150. All new ball joints, u joints, spring perches, steering box, bds 2" lift and painted everything. Did some long tube headers while the spring perches were out, made it waaay easier to get at the manifold bolts through the fender.

@TheFixTech Год назад

Sounds like it’s going to be a nice truck, make sure you have a qualified professional to do the alignment, you may need camber bushings.

@layzorbeeemz7317 Год назад

@@TheFixTech that bds lift comes with camber/caster bushings thankfully. An aignment will be done asap once I get everything buttoned up.

@davesbroncogarage Год назад

Nicely done! Quality video.

@TheFixTech Год назад

Thank you

@zeromomentum Год назад

Excellent video, Thank you.

@TheFixTech Год назад

You are welcome!

@angelocasio5471 Год назад

Great video short and to the point 💪🏼💪🏼💪🏼I have 91 bronco

@user-wj1fy6yd6m 8 месяцев назад

I also have a 91 bronco. Did you do this to yours? I am just learning how to do mechanical work. I'm still calling things, doeys and thingesys..

@TheFixTech Год назад

I recommend the Moog Springs CC820, they ride very nice and are made in USA! I have links in the description for all the parts used in the video, including the isolators I couldn't find.

@JoshAllen-bw3yx Год назад

What would be the factory replacement height moog coil spring for a 1993 f150 4x4 5.0 xl ?

@invictus204 4 месяца назад

GREAT VIDEOS DUDE,,,🙂🙂🙂👍

@TheFixTech 4 месяца назад

Thanks 👍

@jeremyhoefs8167 5 месяцев назад

Nice video!!!!!!

@TheFixTech 5 месяцев назад

Thanks!

@chadriddle4357 Год назад

I’m doing the same thing right now but I dropped the radius arm bracket to change the bushing on that. Also I went with Moog 824

@TheFixTech Год назад

The radius arm bushings are necessary for a nice ride. I used rubber Moog bushings, you may require a Poly bushing depending on your area. I heard you may need camber bushings if you go with the taller springs.

@chadriddle4357 Год назад

@@TheFixTech Yeah I’ll get my truck aligned afterwards hate how my front end looks like it had a stroke.

@murphytoadster9864 4 месяца назад

I have the 1990 also

@davichin5 4 месяца назад

Hello! Thanks for this straight to the point video, is helping me a lot but mine is a bit different, I am installing 2 inch PRO COMP springs, and put the energy suspension spring isolator, my question is: do I need to apply grease on those isolators?? Because they are sounding very squeeky (I dont know how it writes) ??? Please help

@treeoflifebyjwp 11 месяцев назад

Hi Thanks for yet another great video. When I look up the Moog coil spring CC820 as you are recommending they say “without dual shocks”. Is that right or am I misunderstanding something. You got dual shocks in the front. Thanks again.

@murphytoadster9864 4 месяца назад

Damnit maybe I should have got those springs I went and bought old stock springs because my lift kit springs were way too thin and stuff giving me a horrible stiff ride

@murphytoadster9864 3 месяца назад

I didn't have to take my wheels off Or disassembl anything besides the actual bolt holding the spring and it's retainer

@rentcda Год назад

Another great video! Thanks! Did your springs settle? I'm curious. I'm unsure what springs I need. The front end of my bronco is two inches lower than the rear. I'd like to have a more level look.

@TheFixTech Год назад

Yes, I actually found the ford isolators and installed them, I am at 35 1/8 on the front. Have you changed your rear leafs or lifted the rear? Stock rear leaf capacity is 1650. If you have stock rear springs but want a level look, go for the cc822 or 824 if you have the 5.8 quad shock.

@rentcda Год назад

@@TheFixTech I have the original stock leaf springs in the back. Single shock up w the 5.0 under the hood. Thanks for responding! I always stop what I'm doing to watch your Bronco videos.

@johngraziani8100 Год назад

I have the same bronco but in green. If I heard correctly, you said this was your personal vehicle? If so will you be doing a series on the 1990 Eddie Bauer? That would be awesome for me lol.

@TheFixTech Год назад

Yes I do have a playlist set of all the videos I have made of this truck so far on my channel. I am planning more videos to come, next topics will be about transmission, another about rear main seal, leaf springs ect… these trucks are fun to work on and especially to drive. Keep your truck running strong because they don’t make them like these anymore.

@grantwtk Год назад

Did you notice handling improvment over stuff like washboard? I assume it would be much better because those progressive springs take less force to react to smaller bumps.

@TheFixTech Год назад

Yes, and my door panel screws are staying in place now. One of the best upgrades for these trucks. I was very satisfied to see my Moogs were made in USA.

@TheFixTech Год назад

Also I would like to mention if you decide to do this upgrade and choose these springs to match them with quality shock. I am running the bilstein shocks and am happy with the ride. If I had the option to redo the shocks I would go for the Fox adjustable so you can dial them in as you see fit. The bilsteins are nice but a little on the firm side.

@ThePoweverofWagon Год назад

@@TheFixTech Have you tried not running the auxiliary shock in the front? The spring/shock combo you installed is the exact one I was looking at for my '94 5.8.

@rustybarrr Год назад

Great job thanks. Question for you. I went with the 824 and it leveled my 94 F150. I really like the look. But I am concerned about the camber. It looks like my from wheels are tilted out. Will an alignment be able to bring them back in?

@TheFixTech Год назад

Yes, a good alignment shop can. Also moog makes a set of adjustable caster/camber bushings that allow better/easier adjustment.

@livinglifemyway7349 Год назад

So can you tell me if all 1990 bronco's with tow package have the quad front shocks? 5.0 motor or is it only with the 5.8 ? thanks

@greenthumbgardens8650 Год назад

Thanks for the video! I have a 1989 5.8L Bronco with the dual shocks and will probably be replacing the coils soon . I already have the sway bar links and will be installing those at the same time. I would like to upgrade the shocks to bilstein, do you have the part numbers for the front shocks? Thanks

@TheFixTech Год назад

Yes, I have added links in the description for the shocks. The front shocks are: 24-013284, quad are: 24-184809

@greenthumbgardens8650 Год назад

@@TheFixTech Thanks

@orlandoperez3006 Год назад

I noticed you finally secured the spring on top but for safety sake though probably should be secured first, god forbid it come out while you were compressing it, remember safety is intentional

@murphytoadster9864 4 месяца назад

I wanna know how did they feel on your test drive ??

@alexanderb4795 8 месяцев назад

The shocks you put in the description are for 2wd will they also work with the 4wd bronco ?

@TheFixTech 8 месяцев назад

Yes, these bilsteins will work on the 4wd or 2wd version. If you truck does not have the quad shock option then be sure not to buy the aux shock

@extramiledetailing 10 месяцев назад

Do you need to have a quad spring setup, I have a 6inch lift kit that only came with the 2 main shocks

@TheFixTech 10 месяцев назад

It is not needed, some trucks left the factory with the one shock setup. If your truck has the auxiliary shock option I do recommend installing it since you have a 6 inch lift. It will give better stability.

@HumbletravelsTV Год назад

Hey mate, I watched your video and its been very helpful. Unfortunately, the top bolt on my dual shocks continue to spin and sping. I have a vice grip at the very top and thought that would help while I try to unthread the bolt with a wrench. I've even sprayed PB Blaster. NO luck, any tips?

@TheFixTech Год назад

Top bolt holding the spring or top nut on the shock?

@HumbletravelsTV Год назад

@@TheFixTech top nut on shock

@aedanhickey5264 Год назад

Do you have any videos on the front 4x4 unjoint replacement and items like that?

@TheFixTech Год назад

The u joint on the front axle shaft? I believe the whole axle can be replaced. I do have a video removing the hub assembly in my front 4x4 brake rebuilding video. You would then have to remove the knuckle and the axle will slide out.

@aedanhickey5264 Год назад

@@TheFixTech okay sweet, thank you

@williamcoreas8323 Год назад

Good video fix. Hey, man, I got a 96 Bronco 5.8l xl. Would those shocks you got on you tuck would work even thou my truck only has the single ones?

@TheFixTech Год назад

Yes these shocks are perfect for the 1996 bronco. You will only need the main shocks, your truck will have a smoother ride as the “quad shock” models will be stiffer.

@williamcoreas8323 Год назад

@@TheFixTech the main shocks which are?

@williamcoreas8323 Год назад

@The Fix do you have a part number for them?

@williamcoreas8323 Год назад

@@TheFixTech thanks for answering back

@ItAintEazyBeingCheezy11 14 дней назад

Are billstein shocks really worth the money for ride quality? Or are ranchos and others still good

@TheFixTech 5 дней назад

Bilsteins are by far the best, they will give a firm, controlled ride if you have the quad shock setup. You can remove the front most (auxiliary shock) for a softer ride. B6 for stock height, B8 for lifted trucks

@425flex Год назад

Hey the fix, my front auxillary shock broke but the rest are okay. can i replace just the one coil shock with a blistien shock even thought my other suspension pieces arent by blistein?

@TheFixTech Год назад

You can but it is not recommended, you will wear out the new shock faster and cause uneven tire wear. The front auxiliary shock (the one closest to the front bumper) aren’t that important for day to day driving and can be completely removed. I know people who prefer a softer ride quality in which that will give. In any case shocks should be replaced in pairs so if you do replace the 1 shock (driver side), be sure to replace the other (passenger side) with same manufacture. You can mismatch with the front and rears, but side to side should be same shock.

@425flex Год назад

@@TheFixTech okay so its my right front passenger auxiliary that's broken, I should replace the driver side front auxiliary as well is what your telling me?

@TheFixTech Год назад

Yes, and they can both be bilstein.

@tristanc5937 2 месяца назад

Will this improve ride quality?

@TheFixTech 2 месяца назад

Yes, the moog springs are progressive vs linear on the stock. Will make the ride a bit smoother. Also if you have the quad shock setup like shown, you can remove the front most shock for a softer ride as well:

@tristanc5937 2 месяца назад

@@TheFixTech yea mine is quad also. So it would be ok just to do the front shock? Do u have a recommendation for a shock that would fit?

@tristanc5937 2 месяца назад

@@TheFixTech my ride quality is horrible, so bumpy and uncomfortable

@angelocasio5471 Год назад

I replaced springs on a 91 bronco now the truck is bouncing .

@TheFixTech Год назад

The shocks will need replacement

@angelocasio5471 Год назад

@@TheFixTech I replaced them also I’m going to try longer springs

@redsion23 Год назад

Dumb question but would these new coil springs work for the 4.9 as well? I'm not sure if the extra weight difference between the 5.0 and 4.9 would really matter. I suspect my coils are on the way out as I have new shocks and the front end is super easy to push down.

@TheFixTech Год назад

The shown coils Moog cc820 would work great but may lift your front end about 1/2 to 1 inch. For a more factory height the Moog cc818 would be the better option.